[PATCH v2 00/11] clk: implement clock rate protection mechanism

Jerome Brunet jbrunet at baylibre.com
Sun May 21 14:59:47 PDT 2017


This Patchset is related the RFC [0] and the discussion around
CLK_SET_RATE_GATE available here [1]

The goal of this patchset is to provide a way for consumers to inform the
system that they depend on the rate of the clock source and can't tolerate
other consumers changing the rate or causing glitches.

With this series there is 3 use-case:
 - the provider is not protected: nothing changes
 - the provider is protected by only 1 consumer (and only once), then only
   this consumer will be able to alter the rate of the clock, as it is the
   only one depending on it.
 - If the provider is protected more than once, or by the provider itself,
   the rate is basically locked.

The last 2 patches provide the same functionnality for providers themself
by fixing CLK_SET_RATE_GATE (enforce clock gating along the tree)

qcom, at91 and ux500 are the heaviest users of this flag. If anybody having
one these platform could try this series, I would help build confidence
that they are relying on CLK_SET_RATE_GATE being broken.

Changes since RFC:
 - s/clk_protect/clk_rate_protect
 - Request rework around core_nolock function
 - Add clk_set_rate_protect
 - Reword clk_rate_protect and clk_unprotect documentation
 - Add few comments to explain the code
 - Add 2 last patches to fix users of CLK_SET_RATE_GATE

Changes since v1:
 - Add patch 4: Check if the rate would actually change before continuing, a
   possibly in clk_set_rate.

This was tested with the audio use case mentioned in [1]

[0]: http://lkml.kernel.org/r/20170321183330.26722-1-jbrunet@baylibre.com
[1]: http://lkml.kernel.org/r/148942423440.82235.17188153691656009029@resonance

Jerome Brunet (11):
  clk: take the prepare lock out of clk_core_set_parent
  clk: add clk_core_set_phase_nolock function
  clk: rework calls to round and determine rate callbacks
  clk: use round rate to bail out early in set_rate
  clk: add support for clock protection
  clk: add clk_set_rate_protect
  clk: rollback set_rate_range changes on failure
  clk: cosmetic changes to clk_summary debugfs entry
  clk: fix incorrect usage of ENOSYS
  clk: fix CLK_SET_RATE_GATE with clock rate protection
  clk: move CLK_SET_RATE_GATE protection from prepare to enable

 drivers/clk/clk.c            | 429 ++++++++++++++++++++++++++++++++++++-------
 include/linux/clk-provider.h |   1 +
 include/linux/clk.h          |  43 +++++
 3 files changed, 403 insertions(+), 70 deletions(-)

-- 
2.9.4




More information about the linux-amlogic mailing list