[PATCH v2 00/13] drm/meson: Initial support for HDMI Output

Daniel Vetter daniel at ffwll.ch
Tue Apr 4 02:04:50 PDT 2017


On Tue, Mar 21, 2017 at 04:25:37PM +0100, Neil Armstrong wrote:
> The Amlogic GX SoCs implements a Synopsys DesignWare HDMI TX Controller
> in combination with a very custom PHY.
> 
> This patchset depends on Laurent Pinchart patchset merged in drm-misc-next
> and my v4 patchset at [1] to permit PHY control from outside the dw-hdmi driver.
> 
> The Synopsys DesignWare HDMI TX Controller is integrated like :
>          ___________________________________
>         |            HDMI TOP               |<= HPD
>         |___________________________________|
>         |                  |                |
> HDMI-TX-|  Synopsys HDMI   |   HDMI PHY     |=> TMDS
>         |    Controller    |________________|
>         |___________________________________|<=> DDC
> 
> And uses the following paths for Pixels Encoding :
>        _____   _____   ____________________
> vd1---|     |-|     | | VENC     /---------|----VDAC
> vd2---| VIU |-| VPP |-|-----ENCI/-ENCI_DVI-|\
> osd1--|     |-|     | | \                  | X--HDMI-TX
> osd2--|_____|-|_____| |  |\-ENCP--ENCP_DVI-|/
>                       |  |                 |
>                       |  \--ENCL-----------|----LVDS
>                       |____________________|
> 
> The ENCI and ENCP encoders pre-formats the data for the ENCI-DVI and
> ENCP-DVI encoders. Those DVI encoders will format the pixels for the
> Synopsys DesignWare HDMI TX Controller.
> 
> In order to support display modes, the ENCI and ENCP encoders needs very
> specific parameters for *each* display modes, so usage of the CEA VIC
> identifier is necessary. But the DVI timings are generated from the
> drm_mode structure in a generic way.
> 
> To simplify the first push, only the main CEA modes are supported up to
> 1920x1080p60. Supporting the 480i and 576i needs tweaking in the dw-hdmi
> in order to support the Clock Doubling necessary for these modes.
> 
> Support for more traditional modes like the EDID fallback modes is planned
> but will need tome additionnal handling along the CEA modes.
> Support for 4k2k modes needs to be able to get the EDID HDMI modes, but
> for now only the HDMI 1.4 modes are currently available in the drm_edid
> implementation.

Ok I scanned throught this and applied a bunch of comments. Mostly because
I need volunteers to review one of my own patch series that I need to
resend after some polish.

But I think it'd would be a _lot_ more useful if the various arm-soc
drivers would cross-check their driver amongst themselves. Especially
around drm bridges there's a lot of people involved, almost all hang out
on #dri-devel, so should be very easy to coordinate some cross review.

On all the patches except the dt ones: Acked-by: Daniel Vetter <daniel.vetter at ffwll.ch>
-Daniel

> 
> This patchset does :
>  - Fixes the CRTC handling
>  - Fixes the registers definitions
>  - Adds support for device components registration along of-graph
>  - Adds support for HDMI clocks
>  - Adds support for HDMI VENC video modes
>  - Adds support for the Custom HDMI PHY using callbacks added in [1] and [2]
>  - Adds CMA node to reserve enougth memory for 1080p display
>  - Adds the HDMI controller et connector modes on selected boards
>  - Adds a proper dt-bindings for the HDMI controller et connector
>  - Add RST documentation for Meson DRM driver
>  - Updates the MAINTAINERS file to track the new files
> 
> Changes since v1 patchset at [2] :
>  - Add the meson drm documentation from [3] to this patchset
>  - Update with new bus formats and HPD callbacks
>  - Drop all the of_machine_is_compatible
> 
> [1] http://lkml.kernel.org/r/1490109161-20529-1-git-send-email-narmstrong@baylibre.com
> [2] http://lkml.kernel.org/r/1488469207-523-1-git-send-email-narmstrong@baylibre.com
> [3] http://lkml.kernel.org/r/1488536068-9407-1-git-send-email-narmstrong@baylibre.com
> 
> Neil Armstrong (13):
>   drm/meson: Use crtc_state for hdisplay and fix atomic flush/enable
>     sync for vsync commit
>   drm/meson: Add missing HDMI register
>   drm/meson: Add support for components
>   drm/meson: venc_cvbs: no more return -ENODEV if CVBS is not available
>   drm/meson: add support for HDMI clock support
>   drm/meson: Add support for HDMI venc modes and settings
>   drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY
>   ARM64: dts: meson-gx: Add shared CMA dma memory pool
>   ARM64: dts: meson-gx: Add support for HDMI output
>   dt-bindings: Add bindings for the Amlogic Meson dw-hdmi extension
>   drm/meson: Convert existing documentation to actual kerneldoc
>   drm/meson: Add RST to bring together kerneldoc
>   MAINTAINERS: update files for Amlogic DRM Driver
> 
>  .../bindings/display/amlogic,meson-dw-hdmi.txt     |  111 ++
>  Documentation/gpu/index.rst                        |    1 +
>  Documentation/gpu/meson.rst                        |   61 +
>  MAINTAINERS                                        |    2 +
>  .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi |   39 +
>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi          |   40 +
>  .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts    |   23 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi   |   23 +
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   12 +
>  .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts    |   23 +
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |   13 +
>  .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |   23 +
>  arch/arm64/boot/dts/amlogic/meson-gxm.dtsi         |    3 +
>  drivers/gpu/drm/meson/Kconfig                      |    6 +
>  drivers/gpu/drm/meson/Makefile                     |    1 +
>  drivers/gpu/drm/meson/meson_canvas.c               |    4 +-
>  drivers/gpu/drm/meson/meson_crtc.c                 |   15 +-
>  drivers/gpu/drm/meson/meson_drv.c                  |  118 +-
>  drivers/gpu/drm/meson/meson_drv.h                  |    3 +
>  drivers/gpu/drm/meson/meson_dw_hdmi.c              |  919 ++++++++++++++
>  drivers/gpu/drm/meson/meson_dw_hdmi.h              |  146 +++
>  drivers/gpu/drm/meson/meson_registers.h            |    1 +
>  drivers/gpu/drm/meson/meson_vclk.c                 |  632 +++++++++-
>  drivers/gpu/drm/meson/meson_vclk.h                 |    6 +-
>  drivers/gpu/drm/meson/meson_venc.c                 | 1254 +++++++++++++++++++-
>  drivers/gpu/drm/meson/meson_venc.h                 |    7 +
>  drivers/gpu/drm/meson/meson_venc_cvbs.c            |   11 +-
>  drivers/gpu/drm/meson/meson_viu.c                  |    6 +-
>  drivers/gpu/drm/meson/meson_vpp.c                  |    8 +-
>  drivers/gpu/drm/meson/meson_vpp.h                  |    2 +
>  30 files changed, 3466 insertions(+), 47 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
>  create mode 100644 Documentation/gpu/meson.rst
>  create mode 100644 drivers/gpu/drm/meson/meson_dw_hdmi.c
>  create mode 100644 drivers/gpu/drm/meson/meson_dw_hdmi.h
> 
> -- 
> 1.9.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch



More information about the linux-amlogic mailing list