stmmac/RTL8211F/Meson GXBB: TX throughput problems

[André Roth]

> Andre, the 3.14 kernel you are talking, is it this one ? : 
> https://github.com/hardkernel/linux/tree/odroidc2-3.14.y

yes
 
> Because in drivers/net/phy/realtek.c, they disable EEE, but
> also 1000Base-T Full Duplex advertisement ?
> 
> +	/* disable 1000m adv*/
> +	val = phy_read(phydev, 0x9);
> +	phy_write(phydev, 0x9, val&(~(1<<9)));
> 
> If this is the kernel you are running, you should not be able to have
> ethernet at 1000MB/s ? Or is it in half duplex mode ?

ethtool shows 1000Mb/s Full-Duplex and the bandwith is around 300Mb/s
(as measured by scp). kernel version: 3.14.65-73