[PATCH v2] clk: gxbb: expose CLKID_MMC_PCLK

[Michael Turquette]

Quoting Kevin Hilman (2016-07-06 20:38:37)
> The MMC_PCLK is needed for the SD/eMMC driver, expose to DT (and comment
> out in clk driver)
> 
> Signed-off-by: Kevin Hilman <khilman at baylibre.com>

Applied to the same clk-s905 branch if you need to re-pull it as a
dependency.

Regards,
Mike

> ---
>  drivers/clk/meson/gxbb.h              | 2 +-
>  include/dt-bindings/clock/gxbb-clkc.h | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
> index a2adf3448b59..8355ecd27b81 100644
> --- a/drivers/clk/meson/gxbb.h
> +++ b/drivers/clk/meson/gxbb.h
> @@ -234,7 +234,7 @@
>  #define CLKID_HDMI_PCLK                  63
>  #define CLKID_USB1_DDR_BRIDGE    64
>  #define CLKID_USB0_DDR_BRIDGE    65
> -#define CLKID_MMC_PCLK           66
> +/* CLKID_MMC_PCLK */          
>  #define CLKID_DVIN               67
>  #define CLKID_UART2              68
>  #define CLKID_SANA               69
> diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
> index f889d80246cb..5eb69ec74f6b 100644
> --- a/include/dt-bindings/clock/gxbb-clkc.h
> +++ b/include/dt-bindings/clock/gxbb-clkc.h
> @@ -8,5 +8,6 @@
>  #define CLKID_CPUCLK           1
>  #define CLKID_CLK81            12
>  #define CLKID_ETH              36
> +#define CLKID_MMC_PCLK         66
>  
>  #endif /* __GXBB_CLKC_H */
> -- 
> 2.9.0
>