[LEDE-DEV] [PATCH v3 6/6] ipq806x: Enable ubi image for ipq40xx AP-DK04.1-C1 board

[Ram Chandra Jangir]

This change enables ubi image for IPQ40xx AP-DK04.1-C1
board, also add sysupgrage support for AP-DK04.1-C1 and
generates a sysupgrade.tar image.

Testing:
 *Tested on IPQ40xx AP-DK04.1-C1:
   a. NAND boot
   b. ubi sysupgrade

Signed-off-by: Ram Chandra Jangir <rjangir at codeaurora.org>
---

Changes since v2:
 *Splitted to individual patches

 target/linux/ipq806x/base-files/lib/upgrade/platform.sh | 1 +
 target/linux/ipq806x/image/Makefile                     | 1 +
 2 files changed, 2 insertions(+)

diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index 8970285..fd08db3 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -12,6 +12,7 @@ platform_pre_upgrade() {
 
 	case "$board" in
 	ap148 |\
+	ap-dk04.1-c1 |\
 	d7800 |\
 	nbg6817 |\
 	r7500 |\
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index 6ebcde5..c49a73e 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -264,6 +264,7 @@ endef
 
 define Device/AP-DK04.1-C1
 	$(call Device/FitImage)
+	$(call Device/UbiFit)
 	DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 	KERNEL_LOADADDR := 0x80208000
 	KERNEL_INSTALL := 1
-- 
2.7.2