[LEDE-DEV] [PATCH] ar71xx: add Abicom SC300M support
John Crispin
john at phrozen.org
Sun Jan 15 05:52:17 PST 2017
Hi,
looks good, one minor nitpicks inline
On 11/01/2017 17:19, Conor O'Gorman wrote:
> Support Abicom International Scorpion SC300M Module
>
> QCA9550 700MHz Extended Temperature Range
> 256MB DDR2
> 256MB Nand Flash
> 16MB SPI Flash
> 802.11a/na/b/g/ng
> GPIO x 22, USB x2, PCIe x2
> 10/100/1000 Ethernet
> 23dBm, Optional Onboard Antenna
> DC Input, 8-20V DC
> 85 x 55 mm
>
> Signed-off-by: Conor O'Gorman <i at conorogorman.net>
> ---
> target/linux/ar71xx/base-files/etc/board.d/01_leds | 1 +
> .../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
> target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-4.4 | 1 +
> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-sc300m.c | 132 +++++++++++++++++++++
> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> target/linux/ar71xx/image/generic.mk | 10 ++
> 11 files changed, 164 insertions(+), 1 deletion(-)
> create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
>
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> index 5a2bf0c..5be9d4a 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> @@ -279,6 +279,7 @@ gl-mifi)
> esac
> ;;
> gl-domino|\
> +sc300m|\
> wrt160nl)
> ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
> ;;
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
> index 66274db..54069ce 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> @@ -93,6 +93,7 @@ ar71xx_setup_interfaces()
> rb-sxt5n|\
> re450|\
> rocket-m-xw|\
> + sc300m |\
> tl-mr10u|\
> tl-mr11u|\
> tl-mr12u|\
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
> index d060ccf..36f2c43 100644
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -295,7 +295,8 @@ get_status_led() {
> rb-sxt5n)
> status_led="rb:green:power"
> ;;
> - re450)
> + re450|\
> + sc300m)
> status_led="$board:blue:power"
> ;;
> routerstation|\
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 1b30f4d..a8bdc67 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -881,6 +881,9 @@ ar71xx_board_detect() {
> *RW2458N)
> name="rw2458n"
> ;;
> + *SC300M)
> + name="sc300m"
> + ;;
> *"SMART-300")
> name="smart-300"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 6341a31..74808ef 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -226,6 +226,7 @@ platform_check_image() {
> rocket-m-xw|\
> rocket-m|\
> rw2458n|\
> + sc300m|\
> sr3200|\
> tew-632brp|\
> tew-712br|\
> diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
> index 4b2f736..daffdea 100644
> --- a/target/linux/ar71xx/config-4.4
> +++ b/target/linux/ar71xx/config-4.4
> @@ -147,6 +147,7 @@ CONFIG_ATH79_MACH_R6100=y
> # CONFIG_ATH79_MACH_RBSXTLITE is not set
> CONFIG_ATH79_MACH_RE450=y
> CONFIG_ATH79_MACH_RW2458N=y
> +CONFIG_ATH79_MACH_SC300M=y
> CONFIG_ATH79_MACH_SMART_300=y
> CONFIG_ATH79_MACH_SOM9331=y
> CONFIG_ATH79_MACH_SR3200=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> index 21d6b51..56889d7 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -1,3 +1,14 @@
> +config ATH79_MACH_SC300M
> + bool "Abicom SC300M board support"
> + select SOC_QCA955X
> + select ATH79_DEV_AP9X_PCI if PCI
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
This is not ordered correctly
John
> +
> config ATH79_MACH_ALFA_AP120C
> bool "ALFA Network AP120C board support"
> select ATH79_DEV_AP9X_PCI if PCI
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> index 6384c06..915b34e 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -151,6 +151,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
> obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
> obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
> obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
> +obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o
> obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
> obj-$(CONFIG_ATH79_MACH_SOM9331) += mach-som9331.o
> obj-$(CONFIG_ATH79_MACH_SR3200) += mach-sr3200.o
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
> new file mode 100644
> index 0000000..45ec58d
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
> @@ -0,0 +1,132 @@
> +/*
> + * Abicom International Scorpion SC300M Module support.
> + *
> + * Copyright (c) 2012 Qualcomm Atheros
> + * Copyright (c) 2012-2013 Gabor Juhos <juhosg at openwrt.org>
> + * Copyright (c) 2017 Conor O'Gorman <i at conorogorman.net>
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + *
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/phy-at803x.h>
> +
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "pci.h"
> +#include "dev-ap9x-pci.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-eth.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-nfc.h"
> +#include "dev-usb.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +#define SC300M_GPIO_LED_WLAN 0
> +#define SC300M_GPIO_LED_POWER 1
> +
> +#define SC300M_GPIO_BTN_RESET 17
> +
> +#define SC300M_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define SC300M_KEYS_DEBOUNCE_INTERVAL (3 * SC300M_KEYS_POLL_INTERVAL)
> +
> +#define SC300M_MAC0_OFFSET 0
> +#define SC300M_MAC1_OFFSET 6
> +#define SC300M_WMAC_CALDATA_OFFSET 0x1000
> +#define SC300M_PCIE_CALDATA_OFFSET 0x5000
> +
> +static struct gpio_led sc300m_leds_gpio[] __initdata = {
> + {
> + .name = "sc300m:blue:wlan",
> + .gpio = SC300M_GPIO_LED_WLAN,
> + .active_low = 1,
> + },
> + {
> + .name = "sc300m:blue:power",
> + .gpio = SC300M_GPIO_LED_POWER,
> + .active_low = 1,
> + }
> +};
> +
> +static struct gpio_keys_button sc300m_gpio_keys[] __initdata = {
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = SC300M_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = SC300M_GPIO_BTN_RESET,
> + .active_low = 1,
> + }
> +};
> +
> +static struct at803x_platform_data at803x_data = {
> + .disable_smarteee = 1,
> + .enable_rgmii_rx_delay = 0,
> + .enable_rgmii_tx_delay = 0,
> +};
> +
> +static struct mdio_board_info sc300m_mdio0_info[] = {
> + {
> + .bus_id = "ag71xx-mdio.0",
> + .phy_addr = 1,
> + .platform_data = &at803x_data,
> + },
> +};
> +
> +static void __init sc300m_setup(void)
> +{
> + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
> +
> + ath79_register_m25p80(NULL);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(sc300m_leds_gpio),
> + sc300m_leds_gpio);
> + ath79_register_gpio_keys_polled(-1, SC300M_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(sc300m_gpio_keys),
> + sc300m_gpio_keys);
> +
> + ath79_register_usb();
> + ath79_register_nfc();
> +
> + ath79_register_wmac(art + SC300M_WMAC_CALDATA_OFFSET, NULL);
> +
> + ath79_register_mdio(0, 0);
> + mdiobus_register_board_info(sc300m_mdio0_info,
> + ARRAY_SIZE(sc300m_mdio0_info));
> +
> + ath79_init_mac(ath79_eth0_data.mac_addr, art + SC300M_MAC0_OFFSET, 0);
> +
> + ath79_eth0_pll_data.pll_1000 = 0xa6000101;
> + ath79_eth0_pll_data.pll_100 = 0xa4000101;
> + /* GMAC0 is connected to the RMGII interface */
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
> + ath79_eth0_data.phy_mask = 0xF;
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> +
> + ath79_register_eth(0);
> +
> + /* GMAC1 is connected tot eh SGMII interface */
> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
> + ath79_eth1_data.speed = SPEED_1000;
> + ath79_eth1_data.duplex = DUPLEX_FULL;
> +
> + ath79_register_eth(1);
> +
> + ath79_register_pci();
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_SC300M, "SC300M", "Abicom SC300M", sc300m_setup);
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> index 9402185..b1e29f9 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -168,6 +168,7 @@ enum ath79_mach_type {
> ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
> ATH79_MACH_RE450, /* TP-LINK RE450 */
> ATH79_MACH_RW2458N, /* Redwave RW2458N */
> + ATH79_MACH_SC300M, /* Abicom SC300M */
> ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
> ATH79_MACH_SOM9331, /* OpenEmbed SOM9331 */
> ATH79_MACH_SR3200, /* YunCore SR3200 */
> diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
> index e2867e6..f8445b5 100644
> --- a/target/linux/ar71xx/image/generic.mk
> +++ b/target/linux/ar71xx/image/generic.mk
> @@ -464,6 +464,16 @@ define Device/onion-omega
> endef
> TARGET_DEVICES += onion-omega
>
> +define Device/sc300m
> + DEVICE_TITLE := Abicom SC300M
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
> + BOARDNAME = SC300M
> + IMAGE_SIZE = 15744k
> + CONSOLE = ttyS0,115200
> + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
> +endef
> +TARGET_DEVICES += sc300m
> +
> define Device/smart-300
> $(Device/tplink-8mlzma)
> DEVICE_TITLE := NC-LINK SMART-300
>
More information about the Lede-dev
mailing list