[LEDE-DEV] [PATCH] ar71xx: set status led for the gl-* boards

[Wojciech Jowsa]

This sets status_led for the  gl-ar300m and gl-mifi boards, and fixes led names
so that they follow correct naming scheme.


Signed-off-by: Wojciech Jowsa <w.jowsa at radytek.com>
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds  | 21 ++++++++++-----------
 target/linux/ar71xx/base-files/etc/diag.sh          |  4 +++-
 .../ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c   |  8 ++++----
 .../ar71xx/files/arch/mips/ath79/mach-gl-mifi.c     | 10 +++++-----
 4 files changed, 22 insertions(+), 21 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 131b63e..f5c6043 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -312,19 +312,18 @@ dlan-pro-1200-ac)
  ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
  ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
  ;;
-gl-ar150|\
-gl-ar300|\
-gl-ar300m|\
+gl-ar300m)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
+ ;;
 gl-mifi)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
+ ucidef_set_led_netdev "3gnet" "3GNET" "$board:green:net" "wwan0"
+ ;;
+gl-ar150|\
+gl-ar300)
  ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
-
- case "$board" in
- gl-mifi)
- ucidef_set_led_netdev "wan" "WAN" "$board:wan" "eth0"
- ucidef_set_led_netdev "lan" "LAN" "$board:lan" "eth1"
- ucidef_set_led_netdev "3gnet" "3GNET" "$board:net" "wwan0"
- ;;
- esac
  ;;
 gl-domino|\
 sc300m|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index ae6c693..ed9bf3a 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -60,7 +60,9 @@ get_status_led() {
  ap90q|\
  cpe830|\
  cpe870|\
- gl-inet)
+ gl-inet|\
+ gl-mifi|\
+ gl-ar300m)
  status_led="$board:green:lan"
  ;;
  ap96)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
index 62906a1..5b7f958 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
@@ -47,23 +47,23 @@

 static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
     {
-        .name = "gl-ar300m:usb",
+        .name = "gl-ar300m:green:usb",
         .gpio = GL_AR300M_GPIO_LED_USB,
         .active_low = 0,
         .default_state = 1,
     },
     {
-        .name = "gl-ar300m:wlan",
+        .name = "gl-ar300m:red:wlan",
         .gpio = GL_AR300M_GPIO_LED_WLAN,
         .active_low = 1,
     },
     {
-        .name = "gl-ar300m:lan",
+        .name = "gl-ar300m:green:lan",
         .gpio = GL_AR300M_GPIO_LED_LAN,
         .active_low = 1,
     },
     {
-        .name = "gl-ar300m:system",
+        .name = "gl-ar300m:green:system",
         .gpio = GL_AR300M_GPIO_LED_SYSTEM,
         .active_low = 1,
         .default_state = 1,
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
index 42f4415..14365b7 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
@@ -41,27 +41,27 @@

 static struct gpio_led gl_mifi_leds_gpio[] __initdata = {
  {
- .name = "gl-mifi:wan",
+ .name = "gl-mifi:green:wan",
  .gpio = GL_MIFI_GPIO_LED_WAN,
  .active_low = 0,
  },
  {
- .name = "gl-mifi:lan",
+ .name = "gl-mifi:green:lan",
  .gpio = GL_MIFI_GPIO_LED_LAN,
  .active_low = 0,
  },
  {
- .name = "gl-mifi:wlan",
+ .name = "gl-mifi:green:wlan",
  .gpio = GL_MIFI_GPIO_LED_WLAN,
  .active_low = 0,
  },
  {
- .name = "gl-mifi:net",
+ .name = "gl-mifi:green:net",
  .gpio = GL_MIFI_GPIO_LED_NET,
  .active_low = 0,
  },
  {
- .name = "gl-mifi:3gcontrol",
+ .name = "gl-mifi:green:3gcontrol",
  .gpio = GL_MIFI_GPIO_LED_3GCONTROL,
  .active_low = 0,
  }
-- 
2.8.1