[PATCH v1 3/3] apm821xx: remove 4.4 kernel support
Christian Lamparter
chunkeey at googlemail.com
Fri Feb 10 08:44:44 PST 2017
Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
---
...to4xx-integrate-ppc4xx-rng-into-crypto4xx.patch | 481 -------
.../002-powerpc_ibm_phy_add_ar8035.patch | 57 -
...dd-transfer-termination-synchronization-s.patch | 138 --
...ore-Introduce-new-universal-API-to-reques.patch | 335 -----
...dd-transfer-termination-synchronization-s.patch | 282 ----
.../patches-4.4/015-dmaengine-dw-fixed.patch | 1517 --------------------
.../linux/apm821xx/patches-4.4/020-sata-dwc.patch | 1083 --------------
...onvert-IDE-trigger-to-common-disk-trigger.patch | 209 ---
.../200-add-meraki-mr24-ikarem-support.patch | 32 -
.../201-add-amcc-apollo3g-support.patch | 30 -
.../202-add-netgear-wndr4700-support.patch | 32 -
.../203-add-meraki-mx60-buckminster-support.patch | 32 -
.../300-fix-atheros-nics-on-apm82181.patch | 51 -
.../patches-4.4/301-fix-memory-map-wndr4700.patch | 14 -
.../701-powerpc_ibm_apm82181_phyclk_fix.patch | 52 -
.../702-powerpc_ibm_phy_add_dt_parser.patch | 328 -----
...d-firmware-loader-for-uPD720201-and-uPD72.patch | 545 -------
.../802-usb-xhci-force-msi-renesas-xhci.patch | 54 -
.../patches-4.4/803-crypto4xx-make-it-work.patch | 385 -----
.../804-usb-dwc2-add-amcc-usb-otg-405ex.patch | 48 -
...river-for-Microchip-TC654-TC655-PWM-fan-c.patch | 1027 -------------
...0-split-set-and-show-temp-as-common-codes.patch | 292 ----
...12-hwmon-lm90-expose-to-thermal-fw-via-DT.patch | 149 --
23 files changed, 7173 deletions(-)
delete mode 100644 target/linux/apm821xx/patches-4.4/001-crypto4xx-integrate-ppc4xx-rng-into-crypto4xx.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/010-dmaengine-Add-transfer-termination-synchronization-s.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/011-dmaengine-core-Introduce-new-universal-API-to-reques.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/012-dmaengine-Add-transfer-termination-synchronization-s.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/015-dmaengine-dw-fixed.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/020-sata-dwc.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/201-add-amcc-apollo3g-support.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/701-powerpc_ibm_apm82181_phyclk_fix.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/803-crypto4xx-make-it-work.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/804-usb-dwc2-add-amcc-usb-otg-405ex.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/911-hwmon-lm90-split-set-and-show-temp-as-common-codes.patch
delete mode 100644 target/linux/apm821xx/patches-4.4/912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch
diff --git a/target/linux/apm821xx/patches-4.4/001-crypto4xx-integrate-ppc4xx-rng-into-crypto4xx.patch b/target/linux/apm821xx/patches-4.4/001-crypto4xx-integrate-ppc4xx-rng-into-crypto4xx.patch
deleted file mode 100644
index 324c695d05..0000000000
--- a/target/linux/apm821xx/patches-4.4/001-crypto4xx-integrate-ppc4xx-rng-into-crypto4xx.patch
+++ /dev/null
@@ -1,481 +0,0 @@
-From 5343e674f32fb82b7a80a24b5a84eee62d3fe624 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at googlemail.com>
-Date: Mon, 18 Apr 2016 12:57:41 +0200
-Subject: [PATCH] crypto4xx: integrate ppc4xx-rng into crypto4xx
-
-This patch integrates the ppc4xx-rng driver into the existing
-crypto4xx. This is because the true random number generator
-is controlled and part of the security core.
-
-Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
-Signed-off-by: Herbert Xu <herbert at gondor.apana.org.au>
----
- drivers/char/hw_random/Kconfig | 13 ---
- drivers/char/hw_random/Makefile | 1 -
- drivers/char/hw_random/ppc4xx-rng.c | 147 --------------------------------
- drivers/crypto/Kconfig | 8 ++
- drivers/crypto/amcc/Makefile | 1 +
- drivers/crypto/amcc/crypto4xx_core.c | 7 +-
- drivers/crypto/amcc/crypto4xx_core.h | 4 +
- drivers/crypto/amcc/crypto4xx_reg_def.h | 1 +
- drivers/crypto/amcc/crypto4xx_trng.c | 131 ++++++++++++++++++++++++++++
- drivers/crypto/amcc/crypto4xx_trng.h | 34 ++++++++
- 10 files changed, 184 insertions(+), 163 deletions(-)
- delete mode 100644 drivers/char/hw_random/ppc4xx-rng.c
- create mode 100644 drivers/crypto/amcc/crypto4xx_trng.c
- create mode 100644 drivers/crypto/amcc/crypto4xx_trng.h
-
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -268,19 +268,6 @@ config HW_RANDOM_NOMADIK
-
- If unsure, say Y.
-
--config HW_RANDOM_PPC4XX
-- tristate "PowerPC 4xx generic true random number generator support"
-- depends on PPC && 4xx
-- default HW_RANDOM
-- ---help---
-- This driver provides the kernel-side support for the TRNG hardware
-- found in the security function of some PowerPC 4xx SoCs.
--
-- To compile this driver as a module, choose M here: the
-- module will be called ppc4xx-rng.
--
-- If unsure, say N.
--
- config HW_RANDOM_PSERIES
- tristate "pSeries HW Random Number Generator support"
- depends on PPC64 && IBMVIO
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -22,7 +22,6 @@ obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939
- obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
- obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
- obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
--obj-$(CONFIG_HW_RANDOM_PPC4XX) += ppc4xx-rng.o
- obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o
- obj-$(CONFIG_HW_RANDOM_POWERNV) += powernv-rng.o
- obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-rng.o
---- a/drivers/char/hw_random/ppc4xx-rng.c
-+++ /dev/null
-@@ -1,147 +0,0 @@
--/*
-- * Generic PowerPC 44x RNG driver
-- *
-- * Copyright 2011 IBM Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License as published by the
-- * Free Software Foundation; version 2 of the License.
-- */
--
--#include <linux/module.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--#include <linux/hw_random.h>
--#include <linux/delay.h>
--#include <linux/of_address.h>
--#include <linux/of_platform.h>
--#include <asm/io.h>
--
--#define PPC4XX_TRNG_DEV_CTRL 0x60080
--
--#define PPC4XX_TRNGE 0x00020000
--#define PPC4XX_TRNG_CTRL 0x0008
--#define PPC4XX_TRNG_CTRL_DALM 0x20
--#define PPC4XX_TRNG_STAT 0x0004
--#define PPC4XX_TRNG_STAT_B 0x1
--#define PPC4XX_TRNG_DATA 0x0000
--
--#define MODULE_NAME "ppc4xx_rng"
--
--static int ppc4xx_rng_data_present(struct hwrng *rng, int wait)
--{
-- void __iomem *rng_regs = (void __iomem *) rng->priv;
-- int busy, i, present = 0;
--
-- for (i = 0; i < 20; i++) {
-- busy = (in_le32(rng_regs + PPC4XX_TRNG_STAT) & PPC4XX_TRNG_STAT_B);
-- if (!busy || !wait) {
-- present = 1;
-- break;
-- }
-- udelay(10);
-- }
-- return present;
--}
--
--static int ppc4xx_rng_data_read(struct hwrng *rng, u32 *data)
--{
-- void __iomem *rng_regs = (void __iomem *) rng->priv;
-- *data = in_le32(rng_regs + PPC4XX_TRNG_DATA);
-- return 4;
--}
--
--static int ppc4xx_rng_enable(int enable)
--{
-- struct device_node *ctrl;
-- void __iomem *ctrl_reg;
-- int err = 0;
-- u32 val;
--
-- /* Find the main crypto device node and map it to turn the TRNG on */
-- ctrl = of_find_compatible_node(NULL, NULL, "amcc,ppc4xx-crypto");
-- if (!ctrl)
-- return -ENODEV;
--
-- ctrl_reg = of_iomap(ctrl, 0);
-- if (!ctrl_reg) {
-- err = -ENODEV;
-- goto out;
-- }
--
-- val = in_le32(ctrl_reg + PPC4XX_TRNG_DEV_CTRL);
--
-- if (enable)
-- val |= PPC4XX_TRNGE;
-- else
-- val = val & ~PPC4XX_TRNGE;
--
-- out_le32(ctrl_reg + PPC4XX_TRNG_DEV_CTRL, val);
-- iounmap(ctrl_reg);
--
--out:
-- of_node_put(ctrl);
--
-- return err;
--}
--
--static struct hwrng ppc4xx_rng = {
-- .name = MODULE_NAME,
-- .data_present = ppc4xx_rng_data_present,
-- .data_read = ppc4xx_rng_data_read,
--};
--
--static int ppc4xx_rng_probe(struct platform_device *dev)
--{
-- void __iomem *rng_regs;
-- int err = 0;
--
-- rng_regs = of_iomap(dev->dev.of_node, 0);
-- if (!rng_regs)
-- return -ENODEV;
--
-- err = ppc4xx_rng_enable(1);
-- if (err)
-- return err;
--
-- out_le32(rng_regs + PPC4XX_TRNG_CTRL, PPC4XX_TRNG_CTRL_DALM);
-- ppc4xx_rng.priv = (unsigned long) rng_regs;
--
-- err = hwrng_register(&ppc4xx_rng);
--
-- return err;
--}
--
--static int ppc4xx_rng_remove(struct platform_device *dev)
--{
-- void __iomem *rng_regs = (void __iomem *) ppc4xx_rng.priv;
--
-- hwrng_unregister(&ppc4xx_rng);
-- ppc4xx_rng_enable(0);
-- iounmap(rng_regs);
--
-- return 0;
--}
--
--static const struct of_device_id ppc4xx_rng_match[] = {
-- { .compatible = "ppc4xx-rng", },
-- { .compatible = "amcc,ppc460ex-rng", },
-- { .compatible = "amcc,ppc440epx-rng", },
-- {},
--};
--MODULE_DEVICE_TABLE(of, ppc4xx_rng_match);
--
--static struct platform_driver ppc4xx_rng_driver = {
-- .driver = {
-- .name = MODULE_NAME,
-- .of_match_table = ppc4xx_rng_match,
-- },
-- .probe = ppc4xx_rng_probe,
-- .remove = ppc4xx_rng_remove,
--};
--
--module_platform_driver(ppc4xx_rng_driver);
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Josh Boyer <jwboyer at linux.vnet.ibm.com>");
--MODULE_DESCRIPTION("HW RNG driver for PPC 4xx processors");
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -277,6 +277,14 @@ config CRYPTO_DEV_PPC4XX
- help
- This option allows you to have support for AMCC crypto acceleration.
-
-+config HW_RANDOM_PPC4XX
-+ bool "PowerPC 4xx generic true random number generator support"
-+ depends on CRYPTO_DEV_PPC4XX && HW_RANDOM
-+ default y
-+ ---help---
-+ This option provides the kernel-side support for the TRNG hardware
-+ found in the security function of some PowerPC 4xx SoCs.
-+
- config CRYPTO_DEV_OMAP_SHAM
- tristate "Support for OMAP MD5/SHA1/SHA2 hw accelerator"
- depends on ARCH_OMAP2PLUS
---- a/drivers/crypto/amcc/Makefile
-+++ b/drivers/crypto/amcc/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += crypto4xx.o
- crypto4xx-y := crypto4xx_core.o crypto4xx_alg.o crypto4xx_sa.o
-+crypto4xx-$(CONFIG_HW_RANDOM_PPC4XX) += crypto4xx_trng.o
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -40,6 +40,7 @@
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_core.h"
- #include "crypto4xx_sa.h"
-+#include "crypto4xx_trng.h"
-
- #define PPC4XX_SEC_VERSION_STR "0.5"
-
-@@ -1221,6 +1222,7 @@ static int crypto4xx_probe(struct platfo
- if (rc)
- goto err_start_dev;
-
-+ ppc4xx_trng_probe(core_dev);
- return 0;
-
- err_start_dev:
-@@ -1248,6 +1250,8 @@ static int crypto4xx_remove(struct platf
- struct device *dev = &ofdev->dev;
- struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev);
-
-+ ppc4xx_trng_remove(core_dev);
-+
- free_irq(core_dev->irq, dev);
- irq_dispose_mapping(core_dev->irq);
-
-@@ -1268,7 +1272,7 @@ MODULE_DEVICE_TABLE(of, crypto4xx_match)
-
- static struct platform_driver crypto4xx_driver = {
- .driver = {
-- .name = "crypto4xx",
-+ .name = MODULE_NAME,
- .of_match_table = crypto4xx_match,
- },
- .probe = crypto4xx_probe,
-@@ -1280,4 +1284,3 @@ module_platform_driver(crypto4xx_driver)
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("James Hsiao <jhsiao at amcc.com>");
- MODULE_DESCRIPTION("Driver for AMCC PPC4xx crypto accelerator");
--
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -24,6 +24,8 @@
-
- #include <crypto/internal/hash.h>
-
-+#define MODULE_NAME "crypto4xx"
-+
- #define PPC460SX_SDR0_SRST 0x201
- #define PPC405EX_SDR0_SRST 0x200
- #define PPC460EX_SDR0_SRST 0x201
-@@ -72,6 +74,7 @@ struct crypto4xx_device {
- char *name;
- u64 ce_phy_address;
- void __iomem *ce_base;
-+ void __iomem *trng_base;
-
- void *pdr; /* base address of packet
- descriptor ring */
-@@ -106,6 +109,7 @@ struct crypto4xx_core_device {
- struct device *device;
- struct platform_device *ofdev;
- struct crypto4xx_device *dev;
-+ struct hwrng *trng;
- u32 int_status;
- u32 irq;
- struct tasklet_struct tasklet;
---- a/drivers/crypto/amcc/crypto4xx_reg_def.h
-+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
-@@ -125,6 +125,7 @@
- #define PPC4XX_INTERRUPT_CLR 0x3ffff
- #define PPC4XX_PRNG_CTRL_AUTO_EN 0x3
- #define PPC4XX_DC_3DES_EN 1
-+#define PPC4XX_TRNG_EN 0x00020000
- #define PPC4XX_INT_DESCR_CNT 4
- #define PPC4XX_INT_TIMEOUT_CNT 0
- #define PPC4XX_INT_CFG 1
---- /dev/null
-+++ b/drivers/crypto/amcc/crypto4xx_trng.c
-@@ -0,0 +1,131 @@
-+/*
-+ * Generic PowerPC 44x RNG driver
-+ *
-+ * Copyright 2011 IBM Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; version 2 of the License.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/hw_random.h>
-+#include <linux/delay.h>
-+#include <linux/of_address.h>
-+#include <linux/of_platform.h>
-+#include <linux/io.h>
-+
-+#include "crypto4xx_core.h"
-+#include "crypto4xx_trng.h"
-+#include "crypto4xx_reg_def.h"
-+
-+#define PPC4XX_TRNG_CTRL 0x0008
-+#define PPC4XX_TRNG_CTRL_DALM 0x20
-+#define PPC4XX_TRNG_STAT 0x0004
-+#define PPC4XX_TRNG_STAT_B 0x1
-+#define PPC4XX_TRNG_DATA 0x0000
-+
-+static int ppc4xx_trng_data_present(struct hwrng *rng, int wait)
-+{
-+ struct crypto4xx_device *dev = (void *)rng->priv;
-+ int busy, i, present = 0;
-+
-+ for (i = 0; i < 20; i++) {
-+ busy = (in_le32(dev->trng_base + PPC4XX_TRNG_STAT) &
-+ PPC4XX_TRNG_STAT_B);
-+ if (!busy || !wait) {
-+ present = 1;
-+ break;
-+ }
-+ udelay(10);
-+ }
-+ return present;
-+}
-+
-+static int ppc4xx_trng_data_read(struct hwrng *rng, u32 *data)
-+{
-+ struct crypto4xx_device *dev = (void *)rng->priv;
-+ *data = in_le32(dev->trng_base + PPC4XX_TRNG_DATA);
-+ return 4;
-+}
-+
-+static void ppc4xx_trng_enable(struct crypto4xx_device *dev, bool enable)
-+{
-+ u32 device_ctrl;
-+
-+ device_ctrl = readl(dev->ce_base + CRYPTO4XX_DEVICE_CTRL);
-+ if (enable)
-+ device_ctrl |= PPC4XX_TRNG_EN;
-+ else
-+ device_ctrl &= ~PPC4XX_TRNG_EN;
-+ writel(device_ctrl, dev->ce_base + CRYPTO4XX_DEVICE_CTRL);
-+}
-+
-+static const struct of_device_id ppc4xx_trng_match[] = {
-+ { .compatible = "ppc4xx-rng", },
-+ { .compatible = "amcc,ppc460ex-rng", },
-+ { .compatible = "amcc,ppc440epx-rng", },
-+ {},
-+};
-+
-+void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev)
-+{
-+ struct crypto4xx_device *dev = core_dev->dev;
-+ struct device_node *trng = NULL;
-+ struct hwrng *rng = NULL;
-+ int err;
-+
-+ /* Find the TRNG device node and map it */
-+ trng = of_find_matching_node(NULL, ppc4xx_trng_match);
-+ if (!trng || !of_device_is_available(trng))
-+ return;
-+
-+ dev->trng_base = of_iomap(trng, 0);
-+ of_node_put(trng);
-+ if (!dev->trng_base)
-+ goto err_out;
-+
-+ rng = kzalloc(sizeof(*rng), GFP_KERNEL);
-+ if (!rng)
-+ goto err_out;
-+
-+ rng->name = MODULE_NAME;
-+ rng->data_present = ppc4xx_trng_data_present;
-+ rng->data_read = ppc4xx_trng_data_read;
-+ rng->priv = (unsigned long) dev;
-+ core_dev->trng = rng;
-+ ppc4xx_trng_enable(dev, true);
-+ out_le32(dev->trng_base + PPC4XX_TRNG_CTRL, PPC4XX_TRNG_CTRL_DALM);
-+ err = devm_hwrng_register(core_dev->device, core_dev->trng);
-+ if (err) {
-+ ppc4xx_trng_enable(dev, false);
-+ dev_err(core_dev->device, "failed to register hwrng (%d).\n",
-+ err);
-+ goto err_out;
-+ }
-+ return;
-+
-+err_out:
-+ of_node_put(trng);
-+ iounmap(dev->trng_base);
-+ kfree(rng);
-+ dev->trng_base = NULL;
-+ core_dev->trng = NULL;
-+}
-+
-+void ppc4xx_trng_remove(struct crypto4xx_core_device *core_dev)
-+{
-+ if (core_dev && core_dev->trng) {
-+ struct crypto4xx_device *dev = core_dev->dev;
-+
-+ devm_hwrng_unregister(core_dev->device, core_dev->trng);
-+ ppc4xx_trng_enable(dev, false);
-+ iounmap(dev->trng_base);
-+ kfree(core_dev->trng);
-+ }
-+}
-+
-+MODULE_ALIAS("ppc4xx_rng");
---- /dev/null
-+++ b/drivers/crypto/amcc/crypto4xx_trng.h
-@@ -0,0 +1,34 @@
-+/**
-+ * AMCC SoC PPC4xx Crypto Driver
-+ *
-+ * Copyright (c) 2008 Applied Micro Circuits Corporation.
-+ * All rights reserved. James Hsiao <jhsiao at amcc.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * This file defines the security context
-+ * associate format.
-+ */
-+
-+#ifndef __CRYPTO4XX_TRNG_H__
-+#define __CRYPTO4XX_TRNG_H__
-+
-+#ifdef CONFIG_HW_RANDOM_PPC4XX
-+void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev);
-+void ppc4xx_trng_remove(struct crypto4xx_core_device *core_dev);
-+#else
-+static inline void ppc4xx_trng_probe(
-+ struct crypto4xx_device *dev __maybe_unused) { }
-+static inline void ppc4xx_trng_remove(
-+ struct crypto4xx_device *dev __maybe_unused) { }
-+#endif
-+
-+#endif
diff --git a/target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch b/target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch
deleted file mode 100644
index f885167e04..0000000000
--- a/target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 0c13957a43a90b1522eb616f3c9967ec44e4da1d Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at googlemail.com>
-Date: Tue, 3 May 2016 13:58:24 +0200
-Subject: [PATCH] drivers: net: emac: add Atheros AR8035 phy initialization
- code
-To: netdev at vger.kernel.org
-
-This patch adds the phy initialization code for Qualcomm
-Atheros AR8035 phy. This configuration is found in the
-Cisco Meraki MR24.
-
-Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
----
- drivers/net/ethernet/ibm/emac/phy.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/drivers/net/ethernet/ibm/emac/phy.c
-+++ b/drivers/net/ethernet/ibm/emac/phy.c
-@@ -470,12 +470,38 @@ static struct mii_phy_def m88e1112_phy_d
- .ops = &m88e1112_phy_ops,
- };
-
-+static int ar8035_init(struct mii_phy *phy)
-+{
-+ phy_write(phy, 0x1d, 0x5); /* Address debug register 5 */
-+ phy_write(phy, 0x1e, 0x2d47); /* Value copied from u-boot */
-+ phy_write(phy, 0x1d, 0xb); /* Address hib ctrl */
-+ phy_write(phy, 0x1e, 0xbc20); /* Value copied from u-boot */
-+
-+ return 0;
-+}
-+
-+static struct mii_phy_ops ar8035_phy_ops = {
-+ .init = ar8035_init,
-+ .setup_aneg = genmii_setup_aneg,
-+ .setup_forced = genmii_setup_forced,
-+ .poll_link = genmii_poll_link,
-+ .read_link = genmii_read_link,
-+};
-+
-+static struct mii_phy_def ar8035_phy_def = {
-+ .phy_id = 0x004dd070,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "Atheros 8035 Gigabit Ethernet",
-+ .ops = &ar8035_phy_ops,
-+};
-+
- static struct mii_phy_def *mii_phy_table[] = {
- &et1011c_phy_def,
- &cis8201_phy_def,
- &bcm5248_phy_def,
- &m88e1111_phy_def,
- &m88e1112_phy_def,
-+ &ar8035_phy_def,
- &genmii_phy_def,
- NULL
- };
diff --git a/target/linux/apm821xx/patches-4.4/010-dmaengine-Add-transfer-termination-synchronization-s.patch b/target/linux/apm821xx/patches-4.4/010-dmaengine-Add-transfer-termination-synchronization-s.patch
deleted file mode 100644
index 89bdd49d2b..0000000000
--- a/target/linux/apm821xx/patches-4.4/010-dmaengine-Add-transfer-termination-synchronization-s.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 7bd903c5ca47fde5ad52370a47776491813c772e Mon Sep 17 00:00:00 2001
-From: Peter Ujfalusi <peter.ujfalusi at ti.com>
-Date: Mon, 14 Dec 2015 22:47:39 +0200
-Subject: [PATCH 1/3] dmaengine: core: Move and merge the code paths using
- private_candidate
-
-Channel matching with private_candidate() is used in two paths, the error
-checking is slightly different in them and they are duplicating code also.
-Move the code under find_candidate() to provide consistent execution and
-going to allow us to reuse this mode of channel lookup later.
-
-Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
-Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
-Reviewed-by: Arnd Bergmann <arnd at arndb.de>
-Signed-off-by: Vinod Koul <vinod.koul at intel.com>
----
- drivers/dma/dmaengine.c | 81 +++++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 39 deletions(-)
-
---- a/drivers/dma/dmaengine.c
-+++ b/drivers/dma/dmaengine.c
-@@ -542,6 +542,42 @@ static struct dma_chan *private_candidat
- return NULL;
- }
-
-+static struct dma_chan *find_candidate(struct dma_device *device,
-+ const dma_cap_mask_t *mask,
-+ dma_filter_fn fn, void *fn_param)
-+{
-+ struct dma_chan *chan = private_candidate(mask, device, fn, fn_param);
-+ int err;
-+
-+ if (chan) {
-+ /* Found a suitable channel, try to grab, prep, and return it.
-+ * We first set DMA_PRIVATE to disable balance_ref_count as this
-+ * channel will not be published in the general-purpose
-+ * allocator
-+ */
-+ dma_cap_set(DMA_PRIVATE, device->cap_mask);
-+ device->privatecnt++;
-+ err = dma_chan_get(chan);
-+
-+ if (err) {
-+ if (err == -ENODEV) {
-+ pr_debug("%s: %s module removed\n", __func__,
-+ dma_chan_name(chan));
-+ list_del_rcu(&device->global_node);
-+ } else
-+ pr_debug("%s: failed to get %s: (%d)\n",
-+ __func__, dma_chan_name(chan), err);
-+
-+ if (--device->privatecnt == 0)
-+ dma_cap_clear(DMA_PRIVATE, device->cap_mask);
-+
-+ chan = ERR_PTR(err);
-+ }
-+ }
-+
-+ return chan ? chan : ERR_PTR(-EPROBE_DEFER);
-+}
-+
- /**
- * dma_get_slave_channel - try to get specific channel exclusively
- * @chan: target channel
-@@ -580,7 +616,6 @@ struct dma_chan *dma_get_any_slave_chann
- {
- dma_cap_mask_t mask;
- struct dma_chan *chan;
-- int err;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-@@ -588,23 +623,11 @@ struct dma_chan *dma_get_any_slave_chann
- /* lock against __dma_request_channel */
- mutex_lock(&dma_list_mutex);
-
-- chan = private_candidate(&mask, device, NULL, NULL);
-- if (chan) {
-- dma_cap_set(DMA_PRIVATE, device->cap_mask);
-- device->privatecnt++;
-- err = dma_chan_get(chan);
-- if (err) {
-- pr_debug("%s: failed to get %s: (%d)\n",
-- __func__, dma_chan_name(chan), err);
-- chan = NULL;
-- if (--device->privatecnt == 0)
-- dma_cap_clear(DMA_PRIVATE, device->cap_mask);
-- }
-- }
-+ chan = find_candidate(device, &mask, NULL, NULL);
-
- mutex_unlock(&dma_list_mutex);
-
-- return chan;
-+ return IS_ERR(chan) ? NULL : chan;
- }
- EXPORT_SYMBOL_GPL(dma_get_any_slave_channel);
-
-@@ -621,35 +644,15 @@ struct dma_chan *__dma_request_channel(c
- {
- struct dma_device *device, *_d;
- struct dma_chan *chan = NULL;
-- int err;
-
- /* Find a channel */
- mutex_lock(&dma_list_mutex);
- list_for_each_entry_safe(device, _d, &dma_device_list, global_node) {
-- chan = private_candidate(mask, device, fn, fn_param);
-- if (chan) {
-- /* Found a suitable channel, try to grab, prep, and
-- * return it. We first set DMA_PRIVATE to disable
-- * balance_ref_count as this channel will not be
-- * published in the general-purpose allocator
-- */
-- dma_cap_set(DMA_PRIVATE, device->cap_mask);
-- device->privatecnt++;
-- err = dma_chan_get(chan);
-+ chan = find_candidate(device, mask, fn, fn_param);
-+ if (!IS_ERR(chan))
-+ break;
-
-- if (err == -ENODEV) {
-- pr_debug("%s: %s module removed\n",
-- __func__, dma_chan_name(chan));
-- list_del_rcu(&device->global_node);
-- } else if (err)
-- pr_debug("%s: failed to get %s: (%d)\n",
-- __func__, dma_chan_name(chan), err);
-- else
-- break;
-- if (--device->privatecnt == 0)
-- dma_cap_clear(DMA_PRIVATE, device->cap_mask);
-- chan = NULL;
-- }
-+ chan = NULL;
- }
- mutex_unlock(&dma_list_mutex);
-
diff --git a/target/linux/apm821xx/patches-4.4/011-dmaengine-core-Introduce-new-universal-API-to-reques.patch b/target/linux/apm821xx/patches-4.4/011-dmaengine-core-Introduce-new-universal-API-to-reques.patch
deleted file mode 100644
index 7a0e26f6a3..0000000000
--- a/target/linux/apm821xx/patches-4.4/011-dmaengine-core-Introduce-new-universal-API-to-reques.patch
+++ /dev/null
@@ -1,335 +0,0 @@
-From a8135d0d79e9d0ad3a4ff494fceeaae838becf38 Mon Sep 17 00:00:00 2001
-From: Peter Ujfalusi <peter.ujfalusi at ti.com>
-Date: Mon, 14 Dec 2015 22:47:40 +0200
-Subject: [PATCH 2/3] dmaengine: core: Introduce new, universal API to request
- a channel
-
-The two API function can cover most, if not all current APIs used to
-request a channel. With minimal effort dmaengine drivers, platforms and
-dmaengine user drivers can be converted to use the two function.
-
-struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask);
-
-To request any channel matching with the requested capabilities, can be
-used to request channel for memcpy, memset, xor, etc where no hardware
-synchronization is needed.
-
-struct dma_chan *dma_request_chan(struct device *dev, const char *name);
-To request a slave channel. The dma_request_chan() will try to find the
-channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode
-it will use a filter lookup table and retrieves the needed information from
-the dma_slave_map provided by the DMA drivers.
-This legacy mode needs changes in platform code, in dmaengine drivers and
-finally the dmaengine user drivers can be converted:
-
-For each dmaengine driver an array of DMA device, slave and the parameter
-for the filter function needs to be added:
-
-static const struct dma_slave_map da830_edma_map[] = {
- { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
- { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
- { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
- { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
- { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
- { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
- { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
- { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
- { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
- { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
- { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
- { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-This information is going to be needed by the dmaengine driver, so
-modification to the platform_data is needed, and the driver map should be
-added to the pdata of the DMA driver:
-
-da8xx_edma0_pdata.slave_map = da830_edma_map;
-da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
-
-The DMA driver then needs to configure the needed device -> filter_fn
-mapping before it registers with dma_async_device_register() :
-
-ecc->dma_slave.filter_map.map = info->slave_map;
-ecc->dma_slave.filter_map.mapcnt = info->slavecnt;
-ecc->dma_slave.filter_map.fn = edma_filter_fn;
-
-When neither DT or ACPI lookup is available the dma_request_chan() will
-try to match the requester's device name with the filter_map's list of
-device names, when a match found it will use the information from the
-dma_slave_map to get the channel with the dma_get_channel() internal
-function.
-
-Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
-Reviewed-by: Arnd Bergmann <arnd at arndb.de>
-Signed-off-by: Vinod Koul <vinod.koul at intel.com>
----
- Documentation/dmaengine/client.txt | 23 +++-------
- drivers/dma/dmaengine.c | 89 +++++++++++++++++++++++++++++++++-----
- include/linux/dmaengine.h | 51 +++++++++++++++++++---
- 3 files changed, 127 insertions(+), 36 deletions(-)
-
---- a/Documentation/dmaengine/client.txt
-+++ b/Documentation/dmaengine/client.txt
-@@ -22,25 +22,14 @@ The slave DMA usage consists of followin
- Channel allocation is slightly different in the slave DMA context,
- client drivers typically need a channel from a particular DMA
- controller only and even in some cases a specific channel is desired.
-- To request a channel dma_request_channel() API is used.
-+ To request a channel dma_request_chan() API is used.
-
- Interface:
-- struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
-- dma_filter_fn filter_fn,
-- void *filter_param);
-- where dma_filter_fn is defined as:
-- typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
-+ struct dma_chan *dma_request_chan(struct device *dev, const char *name);
-
-- The 'filter_fn' parameter is optional, but highly recommended for
-- slave and cyclic channels as they typically need to obtain a specific
-- DMA channel.
--
-- When the optional 'filter_fn' parameter is NULL, dma_request_channel()
-- simply returns the first channel that satisfies the capability mask.
--
-- Otherwise, the 'filter_fn' routine will be called once for each free
-- channel which has a capability in 'mask'. 'filter_fn' is expected to
-- return 'true' when the desired DMA channel is found.
-+ Which will find and return the 'name' DMA channel associated with the 'dev'
-+ device. The association is done via DT, ACPI or board file based
-+ dma_slave_map matching table.
-
- A channel allocated via this interface is exclusive to the caller,
- until dma_release_channel() is called.
---- a/drivers/dma/dmaengine.c
-+++ b/drivers/dma/dmaengine.c
-@@ -43,6 +43,7 @@
-
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-+#include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/init.h>
- #include <linux/module.h>
-@@ -665,27 +666,73 @@ struct dma_chan *__dma_request_channel(c
- }
- EXPORT_SYMBOL_GPL(__dma_request_channel);
-
-+static const struct dma_slave_map *dma_filter_match(struct dma_device *device,
-+ const char *name,
-+ struct device *dev)
-+{
-+ int i;
-+
-+ if (!device->filter.mapcnt)
-+ return NULL;
-+
-+ for (i = 0; i < device->filter.mapcnt; i++) {
-+ const struct dma_slave_map *map = &device->filter.map[i];
-+
-+ if (!strcmp(map->devname, dev_name(dev)) &&
-+ !strcmp(map->slave, name))
-+ return map;
-+ }
-+
-+ return NULL;
-+}
-+
- /**
-- * dma_request_slave_channel_reason - try to allocate an exclusive slave channel
-+ * dma_request_chan - try to allocate an exclusive slave channel
- * @dev: pointer to client device structure
- * @name: slave channel name
- *
- * Returns pointer to appropriate DMA channel on success or an error pointer.
- */
--struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
-- const char *name)
-+struct dma_chan *dma_request_chan(struct device *dev, const char *name)
- {
-+ struct dma_device *d, *_d;
-+ struct dma_chan *chan = NULL;
-+
- /* If device-tree is present get slave info from here */
- if (dev->of_node)
-- return of_dma_request_slave_channel(dev->of_node, name);
-+ chan = of_dma_request_slave_channel(dev->of_node, name);
-
- /* If device was enumerated by ACPI get slave info from here */
-- if (ACPI_HANDLE(dev))
-- return acpi_dma_request_slave_chan_by_name(dev, name);
-+ if (has_acpi_companion(dev) && !chan)
-+ chan = acpi_dma_request_slave_chan_by_name(dev, name);
-+
-+ if (chan) {
-+ /* Valid channel found or requester need to be deferred */
-+ if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
-+ return chan;
-+ }
-+
-+ /* Try to find the channel via the DMA filter map(s) */
-+ mutex_lock(&dma_list_mutex);
-+ list_for_each_entry_safe(d, _d, &dma_device_list, global_node) {
-+ dma_cap_mask_t mask;
-+ const struct dma_slave_map *map = dma_filter_match(d, name, dev);
-+
-+ if (!map)
-+ continue;
-+
-+ dma_cap_zero(mask);
-+ dma_cap_set(DMA_SLAVE, mask);
-
-- return ERR_PTR(-ENODEV);
-+ chan = find_candidate(d, &mask, d->filter.fn, map->param);
-+ if (!IS_ERR(chan))
-+ break;
-+ }
-+ mutex_unlock(&dma_list_mutex);
-+
-+ return chan ? chan : ERR_PTR(-EPROBE_DEFER);
- }
--EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason);
-+EXPORT_SYMBOL_GPL(dma_request_chan);
-
- /**
- * dma_request_slave_channel - try to allocate an exclusive slave channel
-@@ -697,17 +744,35 @@ EXPORT_SYMBOL_GPL(dma_request_slave_chan
- struct dma_chan *dma_request_slave_channel(struct device *dev,
- const char *name)
- {
-- struct dma_chan *ch = dma_request_slave_channel_reason(dev, name);
-+ struct dma_chan *ch = dma_request_chan(dev, name);
- if (IS_ERR(ch))
- return NULL;
-
-- dma_cap_set(DMA_PRIVATE, ch->device->cap_mask);
-- ch->device->privatecnt++;
--
- return ch;
- }
- EXPORT_SYMBOL_GPL(dma_request_slave_channel);
-
-+/**
-+ * dma_request_chan_by_mask - allocate a channel satisfying certain capabilities
-+ * @mask: capabilities that the channel must satisfy
-+ *
-+ * Returns pointer to appropriate DMA channel on success or an error pointer.
-+ */
-+struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask)
-+{
-+ struct dma_chan *chan;
-+
-+ if (!mask)
-+ return ERR_PTR(-ENODEV);
-+
-+ chan = __dma_request_channel(mask, NULL, NULL);
-+ if (!chan)
-+ chan = ERR_PTR(-ENODEV);
-+
-+ return chan;
-+}
-+EXPORT_SYMBOL_GPL(dma_request_chan_by_mask);
-+
- void dma_release_channel(struct dma_chan *chan)
- {
- mutex_lock(&dma_list_mutex);
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -607,11 +607,38 @@ enum dmaengine_alignment {
- };
-
- /**
-+ * struct dma_slave_map - associates slave device and it's slave channel with
-+ * parameter to be used by a filter function
-+ * @devname: name of the device
-+ * @slave: slave channel name
-+ * @param: opaque parameter to pass to struct dma_filter.fn
-+ */
-+struct dma_slave_map {
-+ const char *devname;
-+ const char *slave;
-+ void *param;
-+};
-+
-+/**
-+ * struct dma_filter - information for slave device/channel to filter_fn/param
-+ * mapping
-+ * @fn: filter function callback
-+ * @mapcnt: number of slave device/channel in the map
-+ * @map: array of channel to filter mapping data
-+ */
-+struct dma_filter {
-+ dma_filter_fn fn;
-+ int mapcnt;
-+ const struct dma_slave_map *map;
-+};
-+
-+/**
- * struct dma_device - info on the entity supplying DMA services
- * @chancnt: how many DMA channels are supported
- * @privatecnt: how many DMA channels are requested by dma_request_channel
- * @channels: the list of struct dma_chan
- * @global_node: list_head for global dma_device_list
-+ * @filter: information for device/slave to filter function/param mapping
- * @cap_mask: one or more dma_capability flags
- * @max_xor: maximum number of xor sources, 0 if no capability
- * @max_pq: maximum number of PQ sources and PQ-continue capability
-@@ -666,6 +693,7 @@ struct dma_device {
- unsigned int privatecnt;
- struct list_head channels;
- struct list_head global_node;
-+ struct dma_filter filter;
- dma_cap_mask_t cap_mask;
- unsigned short max_xor;
- unsigned short max_pq;
-@@ -1140,9 +1168,11 @@ enum dma_status dma_wait_for_async_tx(st
- void dma_issue_pending_all(void);
- struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
- dma_filter_fn fn, void *fn_param);
--struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
-- const char *name);
- struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);
-+
-+struct dma_chan *dma_request_chan(struct device *dev, const char *name);
-+struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask);
-+
- void dma_release_channel(struct dma_chan *chan);
- int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps);
- #else
-@@ -1166,16 +1196,21 @@ static inline struct dma_chan *__dma_req
- {
- return NULL;
- }
--static inline struct dma_chan *dma_request_slave_channel_reason(
-- struct device *dev, const char *name)
--{
-- return ERR_PTR(-ENODEV);
--}
- static inline struct dma_chan *dma_request_slave_channel(struct device *dev,
- const char *name)
- {
- return NULL;
- }
-+static inline struct dma_chan *dma_request_chan(struct device *dev,
-+ const char *name)
-+{
-+ return ERR_PTR(-ENODEV);
-+}
-+static inline struct dma_chan *dma_request_chan_by_mask(
-+ const dma_cap_mask_t *mask)
-+{
-+ return ERR_PTR(-ENODEV);
-+}
- static inline void dma_release_channel(struct dma_chan *chan)
- {
- }
-@@ -1186,6 +1221,8 @@ static inline int dma_get_slave_caps(str
- }
- #endif
-
-+#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name)
-+
- static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx)
- {
- struct dma_slave_caps caps;
diff --git a/target/linux/apm821xx/patches-4.4/012-dmaengine-Add-transfer-termination-synchronization-s.patch b/target/linux/apm821xx/patches-4.4/012-dmaengine-Add-transfer-termination-synchronization-s.patch
deleted file mode 100644
index 21efb046c2..0000000000
--- a/target/linux/apm821xx/patches-4.4/012-dmaengine-Add-transfer-termination-synchronization-s.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From b36f09c3c441a6e59eab9315032e7d546571de3f Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars at metafoo.de>
-Date: Tue, 20 Oct 2015 11:46:28 +0200
-Subject: [PATCH] dmaengine: Add transfer termination synchronization support
-
-The DMAengine API has a long standing race condition that is inherent to
-the API itself. Calling dmaengine_terminate_all() is supposed to stop and
-abort any pending or active transfers that have previously been submitted.
-Unfortunately it is possible that this operation races against a currently
-running (or with some drivers also scheduled) completion callback.
-
-Since the API allows dmaengine_terminate_all() to be called from atomic
-context as well as from within a completion callback it is not possible to
-synchronize to the execution of the completion callback from within
-dmaengine_terminate_all() itself.
-
-This means that a user of the DMAengine API does not know when it is safe
-to free resources used in the completion callback, which can result in a
-use-after-free race condition.
-
-This patch addresses the issue by introducing an explicit synchronization
-primitive to the DMAengine API called dmaengine_synchronize().
-
-The existing dmaengine_terminate_all() is deprecated in favor of
-dmaengine_terminate_sync() and dmaengine_terminate_async(). The former
-aborts all pending and active transfers and synchronizes to the current
-context, meaning it will wait until all running completion callbacks have
-finished. This means it is only possible to call this function from
-non-atomic context. The later function does not synchronize, but can still
-be used in atomic context or from within a complete callback. It has to be
-followed up by dmaengine_synchronize() before a client can free the
-resources used in a completion callback.
-
-In addition to this the semantics of the device_terminate_all() callback
-are slightly relaxed by this patch. It is now OK for a driver to only
-schedule the termination of the active transfer, but does not necessarily
-have to wait until the DMA controller has completely stopped. The driver
-must ensure though that the controller has stopped and no longer accesses
-any memory when the device_synchronize() callback returns.
-
-This was in part done since most drivers do not pay attention to this
-anyway at the moment and to emphasize that this needs to be done when the
-device_synchronize() callback is implemented. But it also helps with
-implementing support for devices where stopping the controller can require
-operations that may sleep.
-
-Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
-Signed-off-by: Vinod Koul <vinod.koul at intel.com>
----
- Documentation/dmaengine/client.txt | 38 ++++++++++++++-
- Documentation/dmaengine/provider.txt | 20 +++++++-
- drivers/dma/dmaengine.c | 5 +-
- include/linux/dmaengine.h | 90 ++++++++++++++++++++++++++++++++++++
- 4 files changed, 148 insertions(+), 5 deletions(-)
-
---- a/Documentation/dmaengine/client.txt
-+++ b/Documentation/dmaengine/client.txt
-@@ -117,7 +117,7 @@ The slave DMA usage consists of followin
- transaction.
-
- For cyclic DMA, a callback function may wish to terminate the
-- DMA via dmaengine_terminate_all().
-+ DMA via dmaengine_terminate_async().
-
- Therefore, it is important that DMA engine drivers drop any
- locks before calling the callback function which may cause a
-@@ -155,12 +155,29 @@ The slave DMA usage consists of followin
-
- Further APIs:
-
--1. int dmaengine_terminate_all(struct dma_chan *chan)
-+1. int dmaengine_terminate_sync(struct dma_chan *chan)
-+ int dmaengine_terminate_async(struct dma_chan *chan)
-+ int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
-
- This causes all activity for the DMA channel to be stopped, and may
- discard data in the DMA FIFO which hasn't been fully transferred.
- No callback functions will be called for any incomplete transfers.
-
-+ Two variants of this function are available.
-+
-+ dmaengine_terminate_async() might not wait until the DMA has been fully
-+ stopped or until any running complete callbacks have finished. But it is
-+ possible to call dmaengine_terminate_async() from atomic context or from
-+ within a complete callback. dmaengine_synchronize() must be called before it
-+ is safe to free the memory accessed by the DMA transfer or free resources
-+ accessed from within the complete callback.
-+
-+ dmaengine_terminate_sync() will wait for the transfer and any running
-+ complete callbacks to finish before it returns. But the function must not be
-+ called from atomic context or from within a complete callback.
-+
-+ dmaengine_terminate_all() is deprecated and should not be used in new code.
-+
- 2. int dmaengine_pause(struct dma_chan *chan)
-
- This pauses activity on the DMA channel without data loss.
-@@ -186,3 +203,20 @@ Further APIs:
- a running DMA channel. It is recommended that DMA engine users
- pause or stop (via dmaengine_terminate_all()) the channel before
- using this API.
-+
-+5. void dmaengine_synchronize(struct dma_chan *chan)
-+
-+ Synchronize the termination of the DMA channel to the current context.
-+
-+ This function should be used after dmaengine_terminate_async() to synchronize
-+ the termination of the DMA channel to the current context. The function will
-+ wait for the transfer and any running complete callbacks to finish before it
-+ returns.
-+
-+ If dmaengine_terminate_async() is used to stop the DMA channel this function
-+ must be called before it is safe to free memory accessed by previously
-+ submitted descriptors or to free any resources accessed within the complete
-+ callback of previously submitted descriptors.
-+
-+ The behavior of this function is undefined if dma_async_issue_pending() has
-+ been called between dmaengine_terminate_async() and this function.
---- a/Documentation/dmaengine/provider.txt
-+++ b/Documentation/dmaengine/provider.txt
-@@ -327,8 +327,24 @@ supported.
-
- * device_terminate_all
- - Aborts all the pending and ongoing transfers on the channel
-- - This command should operate synchronously on the channel,
-- terminating right away all the channels
-+ - For aborted transfers the complete callback should not be called
-+ - Can be called from atomic context or from within a complete
-+ callback of a descriptor. Must not sleep. Drivers must be able
-+ to handle this correctly.
-+ - Termination may be asynchronous. The driver does not have to
-+ wait until the currently active transfer has completely stopped.
-+ See device_synchronize.
-+
-+ * device_synchronize
-+ - Must synchronize the termination of a channel to the current
-+ context.
-+ - Must make sure that memory for previously submitted
-+ descriptors is no longer accessed by the DMA controller.
-+ - Must make sure that all complete callbacks for previously
-+ submitted descriptors have finished running and none are
-+ scheduled to run.
-+ - May sleep.
-+
-
- Misc notes (stuff that should be documented, but don't really know
- where to put them)
---- a/drivers/dma/dmaengine.c
-+++ b/drivers/dma/dmaengine.c
-@@ -266,8 +266,11 @@ static void dma_chan_put(struct dma_chan
- module_put(dma_chan_to_owner(chan));
-
- /* This channel is not in use anymore, free it */
-- if (!chan->client_count && chan->device->device_free_chan_resources)
-+ if (!chan->client_count && chan->device->device_free_chan_resources) {
-+ /* Make sure all operations have completed */
-+ dmaengine_synchronize(chan);
- chan->device->device_free_chan_resources(chan);
-+ }
-
- /* If the channel is used via a DMA request router, free the mapping */
- if (chan->router && chan->router->route_free) {
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -681,6 +681,8 @@ struct dma_filter {
- * paused. Returns 0 or an error code
- * @device_terminate_all: Aborts all transfers on a channel. Returns 0
- * or an error code
-+ * @device_synchronize: Synchronizes the termination of a transfers to the
-+ * current context.
- * @device_tx_status: poll for transaction completion, the optional
- * txstate parameter can be supplied with a pointer to get a
- * struct with auxiliary transfer status information, otherwise the call
-@@ -765,6 +767,7 @@ struct dma_device {
- int (*device_pause)(struct dma_chan *chan);
- int (*device_resume)(struct dma_chan *chan);
- int (*device_terminate_all)(struct dma_chan *chan);
-+ void (*device_synchronize)(struct dma_chan *chan);
-
- enum dma_status (*device_tx_status)(struct dma_chan *chan,
- dma_cookie_t cookie,
-@@ -856,6 +859,13 @@ static inline struct dma_async_tx_descri
- src_sg, src_nents, flags);
- }
-
-+/**
-+ * dmaengine_terminate_all() - Terminate all active DMA transfers
-+ * @chan: The channel for which to terminate the transfers
-+ *
-+ * This function is DEPRECATED use either dmaengine_terminate_sync() or
-+ * dmaengine_terminate_async() instead.
-+ */
- static inline int dmaengine_terminate_all(struct dma_chan *chan)
- {
- if (chan->device->device_terminate_all)
-@@ -864,6 +874,86 @@ static inline int dmaengine_terminate_al
- return -ENOSYS;
- }
-
-+/**
-+ * dmaengine_terminate_async() - Terminate all active DMA transfers
-+ * @chan: The channel for which to terminate the transfers
-+ *
-+ * Calling this function will terminate all active and pending descriptors
-+ * that have previously been submitted to the channel. It is not guaranteed
-+ * though that the transfer for the active descriptor has stopped when the
-+ * function returns. Furthermore it is possible the complete callback of a
-+ * submitted transfer is still running when this function returns.
-+ *
-+ * dmaengine_synchronize() needs to be called before it is safe to free
-+ * any memory that is accessed by previously submitted descriptors or before
-+ * freeing any resources accessed from within the completion callback of any
-+ * perviously submitted descriptors.
-+ *
-+ * This function can be called from atomic context as well as from within a
-+ * complete callback of a descriptor submitted on the same channel.
-+ *
-+ * If none of the two conditions above apply consider using
-+ * dmaengine_terminate_sync() instead.
-+ */
-+static inline int dmaengine_terminate_async(struct dma_chan *chan)
-+{
-+ if (chan->device->device_terminate_all)
-+ return chan->device->device_terminate_all(chan);
-+
-+ return -EINVAL;
-+}
-+
-+/**
-+ * dmaengine_synchronize() - Synchronize DMA channel termination
-+ * @chan: The channel to synchronize
-+ *
-+ * Synchronizes to the DMA channel termination to the current context. When this
-+ * function returns it is guaranteed that all transfers for previously issued
-+ * descriptors have stopped and and it is safe to free the memory assoicated
-+ * with them. Furthermore it is guaranteed that all complete callback functions
-+ * for a previously submitted descriptor have finished running and it is safe to
-+ * free resources accessed from within the complete callbacks.
-+ *
-+ * The behavior of this function is undefined if dma_async_issue_pending() has
-+ * been called between dmaengine_terminate_async() and this function.
-+ *
-+ * This function must only be called from non-atomic context and must not be
-+ * called from within a complete callback of a descriptor submitted on the same
-+ * channel.
-+ */
-+static inline void dmaengine_synchronize(struct dma_chan *chan)
-+{
-+ if (chan->device->device_synchronize)
-+ chan->device->device_synchronize(chan);
-+}
-+
-+/**
-+ * dmaengine_terminate_sync() - Terminate all active DMA transfers
-+ * @chan: The channel for which to terminate the transfers
-+ *
-+ * Calling this function will terminate all active and pending transfers
-+ * that have previously been submitted to the channel. It is similar to
-+ * dmaengine_terminate_async() but guarantees that the DMA transfer has actually
-+ * stopped and that all complete callbacks have finished running when the
-+ * function returns.
-+ *
-+ * This function must only be called from non-atomic context and must not be
-+ * called from within a complete callback of a descriptor submitted on the same
-+ * channel.
-+ */
-+static inline int dmaengine_terminate_sync(struct dma_chan *chan)
-+{
-+ int ret;
-+
-+ ret = dmaengine_terminate_async(chan);
-+ if (ret)
-+ return ret;
-+
-+ dmaengine_synchronize(chan);
-+
-+ return 0;
-+}
-+
- static inline int dmaengine_pause(struct dma_chan *chan)
- {
- if (chan->device->device_pause)
diff --git a/target/linux/apm821xx/patches-4.4/015-dmaengine-dw-fixed.patch b/target/linux/apm821xx/patches-4.4/015-dmaengine-dw-fixed.patch
deleted file mode 100644
index 0380088547..0000000000
--- a/target/linux/apm821xx/patches-4.4/015-dmaengine-dw-fixed.patch
+++ /dev/null
@@ -1,1517 +0,0 @@
-From: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
-Subject: [PATCH v6 0/4] Fixes / cleanups in dw_dmac (affects on few subsystems)
-Date: Mon, 25 Apr 2016 15:35:05 +0300
-
-This patch series (v3: http://www.spinics.net/lists/kernel/msg2215303.html)
-contains a number of mostly minor fixes and cleanups for the DW DMA driver. A
-couple of them affect the DT binding so these may need to be updated to
-maintain compatibility (old format is still supported though). The rest should
-be relatively straight-forward.
-
-This version has been tested on the following bare metal platforms:
-- ATNGW100 (avr32 based platform) with dmatest
-- Sam460ex (powerpc 44x based platform) with SATA
-- Intel Braswell with UART
-- Intel Galileo (Intel Quark based platform) with UART
-
-(SATA driver and Intel Galileo UART support are based on this series and just
- published recently for a review)
-
-Vinod, there are few patch sets developed on top of this one, so, the idea is
-to keep this in an immuutable branch / tag.
-
-Changes since v5:
-- fixed an issue found by kbuildbot
-
-Changes since v4:
-- send proper set of patches
-- add changelog
-
-Changes since v3:
-- add patch 1 to check value of dma-masters property
-- drop the upstreamed patches
-- update patch 2 to keep an array for data-width property as well
-
-Changes since v2:
-- add patch 1 to fix master selection which was broken for long time
-- remove "use field-by-field initialization" patch since like Mans metioned in
- has mostly no value and even might increase error prone
-- rebase on top of recent linux-next
-- wide testing on several platforms
-
-Changes since v1:
-- zeroing struct dw_dma_slave before use
-- fall back to old data_width property if data-width is not found
-- append tags for few patches
-- correct title of cover letter
-- rebase on top of recent linux-next
-
-Andy Shevchenko (4):
- dmaengine: dw: platform: check nr_masters to be non-zero
- dmaengine: dw: revisit data_width property
- dmaengine: dw: keep entire platform data in struct dw_dma
- dmaengine: dw: pass platform data via struct dw_dma_chip
-
- Documentation/devicetree/bindings/dma/snps-dma.txt | 6 +-
- arch/arc/boot/dts/abilis_tb10x.dtsi | 2 +-
- arch/arm/boot/dts/spear13xx.dtsi | 4 +-
- drivers/ata/sata_dwc_460ex.c | 2 +-
- drivers/dma/dw/core.c | 75 ++++++++--------------
- drivers/dma/dw/pci.c | 5 +-
- drivers/dma/dw/platform.c | 32 +++++----
- drivers/dma/dw/regs.h | 5 +-
- include/linux/dma/dw.h | 5 +-
- include/linux/platform_data/dma-dw.h | 4 +-
- sound/soc/intel/common/sst-firmware.c | 2 +-
- 11 files changed, 64 insertions(+), 78 deletions(-)
-
---- a/drivers/dma/dw/core.c
-+++ b/drivers/dma/dw/core.c
-@@ -45,22 +45,19 @@
- DW_DMA_MSIZE_16; \
- u8 _dmsize = _is_slave ? _sconfig->dst_maxburst : \
- DW_DMA_MSIZE_16; \
-+ u8 _dms = (_dwc->direction == DMA_MEM_TO_DEV) ? \
-+ _dwc->p_master : _dwc->m_master; \
-+ u8 _sms = (_dwc->direction == DMA_DEV_TO_MEM) ? \
-+ _dwc->p_master : _dwc->m_master; \
- \
- (DWC_CTLL_DST_MSIZE(_dmsize) \
- | DWC_CTLL_SRC_MSIZE(_smsize) \
- | DWC_CTLL_LLP_D_EN \
- | DWC_CTLL_LLP_S_EN \
-- | DWC_CTLL_DMS(_dwc->dst_master) \
-- | DWC_CTLL_SMS(_dwc->src_master)); \
-+ | DWC_CTLL_DMS(_dms) \
-+ | DWC_CTLL_SMS(_sms)); \
- })
-
--/*
-- * Number of descriptors to allocate for each channel. This should be
-- * made configurable somehow; preferably, the clients (at least the
-- * ones using slave transfers) should be able to give us a hint.
-- */
--#define NR_DESCS_PER_CHANNEL 64
--
- /* The set of bus widths supported by the DMA controller */
- #define DW_DMA_BUSWIDTHS \
- BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
-@@ -80,51 +77,65 @@ static struct dw_desc *dwc_first_active(
- return to_dw_desc(dwc->active_list.next);
- }
-
--static struct dw_desc *dwc_desc_get(struct dw_dma_chan *dwc)
-+static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx)
- {
-- struct dw_desc *desc, *_desc;
-- struct dw_desc *ret = NULL;
-- unsigned int i = 0;
-- unsigned long flags;
-+ struct dw_desc *desc = txd_to_dw_desc(tx);
-+ struct dw_dma_chan *dwc = to_dw_dma_chan(tx->chan);
-+ dma_cookie_t cookie;
-+ unsigned long flags;
-
- spin_lock_irqsave(&dwc->lock, flags);
-- list_for_each_entry_safe(desc, _desc, &dwc->free_list, desc_node) {
-- i++;
-- if (async_tx_test_ack(&desc->txd)) {
-- list_del(&desc->desc_node);
-- ret = desc;
-- break;
-- }
-- dev_dbg(chan2dev(&dwc->chan), "desc %p not ACKed\n", desc);
-- }
-+ cookie = dma_cookie_assign(tx);
-+
-+ /*
-+ * REVISIT: We should attempt to chain as many descriptors as
-+ * possible, perhaps even appending to those already submitted
-+ * for DMA. But this is hard to do in a race-free manner.
-+ */
-+
-+ list_add_tail(&desc->desc_node, &dwc->queue);
- spin_unlock_irqrestore(&dwc->lock, flags);
-+ dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n",
-+ __func__, desc->txd.cookie);
-
-- dev_vdbg(chan2dev(&dwc->chan), "scanned %u descriptors on freelist\n", i);
-+ return cookie;
-+}
-
-- return ret;
-+static struct dw_desc *dwc_desc_get(struct dw_dma_chan *dwc)
-+{
-+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-+ struct dw_desc *desc;
-+ dma_addr_t phys;
-+
-+ desc = dma_pool_zalloc(dw->desc_pool, GFP_ATOMIC, &phys);
-+ if (!desc)
-+ return NULL;
-+
-+ dwc->descs_allocated++;
-+ INIT_LIST_HEAD(&desc->tx_list);
-+ dma_async_tx_descriptor_init(&desc->txd, &dwc->chan);
-+ desc->txd.tx_submit = dwc_tx_submit;
-+ desc->txd.flags = DMA_CTRL_ACK;
-+ desc->txd.phys = phys;
-+ return desc;
- }
-
--/*
-- * Move a descriptor, including any children, to the free list.
-- * `desc' must not be on any lists.
-- */
- static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc)
- {
-- unsigned long flags;
-+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-+ struct dw_desc *child, *_next;
-
-- if (desc) {
-- struct dw_desc *child;
-+ if (unlikely(!desc))
-+ return;
-
-- spin_lock_irqsave(&dwc->lock, flags);
-- list_for_each_entry(child, &desc->tx_list, desc_node)
-- dev_vdbg(chan2dev(&dwc->chan),
-- "moving child desc %p to freelist\n",
-- child);
-- list_splice_init(&desc->tx_list, &dwc->free_list);
-- dev_vdbg(chan2dev(&dwc->chan), "moving desc %p to freelist\n", desc);
-- list_add(&desc->desc_node, &dwc->free_list);
-- spin_unlock_irqrestore(&dwc->lock, flags);
-+ list_for_each_entry_safe(child, _next, &desc->tx_list, desc_node) {
-+ list_del(&child->desc_node);
-+ dma_pool_free(dw->desc_pool, child, child->txd.phys);
-+ dwc->descs_allocated--;
- }
-+
-+ dma_pool_free(dw->desc_pool, desc, desc->txd.phys);
-+ dwc->descs_allocated--;
- }
-
- static void dwc_initialize(struct dw_dma_chan *dwc)
-@@ -133,7 +144,7 @@ static void dwc_initialize(struct dw_dma
- u32 cfghi = DWC_CFGH_FIFO_MODE;
- u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
-
-- if (dwc->initialized == true)
-+ if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags))
- return;
-
- cfghi |= DWC_CFGH_DST_PER(dwc->dst_id);
-@@ -146,26 +157,11 @@ static void dwc_initialize(struct dw_dma
- channel_set_bit(dw, MASK.XFER, dwc->mask);
- channel_set_bit(dw, MASK.ERROR, dwc->mask);
-
-- dwc->initialized = true;
-+ set_bit(DW_DMA_IS_INITIALIZED, &dwc->flags);
- }
-
- /*----------------------------------------------------------------------*/
-
--static inline unsigned int dwc_fast_ffs(unsigned long long v)
--{
-- /*
-- * We can be a lot more clever here, but this should take care
-- * of the most common optimization.
-- */
-- if (!(v & 7))
-- return 3;
-- else if (!(v & 3))
-- return 2;
-- else if (!(v & 1))
-- return 1;
-- return 0;
--}
--
- static inline void dwc_dump_chan_regs(struct dw_dma_chan *dwc)
- {
- dev_err(chan2dev(&dwc->chan),
-@@ -197,12 +193,12 @@ static inline void dwc_do_single_block(s
- * Software emulation of LLP mode relies on interrupts to continue
- * multi block transfer.
- */
-- ctllo = desc->lli.ctllo | DWC_CTLL_INT_EN;
-+ ctllo = lli_read(desc, ctllo) | DWC_CTLL_INT_EN;
-
-- channel_writel(dwc, SAR, desc->lli.sar);
-- channel_writel(dwc, DAR, desc->lli.dar);
-+ channel_writel(dwc, SAR, lli_read(desc, sar));
-+ channel_writel(dwc, DAR, lli_read(desc, dar));
- channel_writel(dwc, CTL_LO, ctllo);
-- channel_writel(dwc, CTL_HI, desc->lli.ctlhi);
-+ channel_writel(dwc, CTL_HI, lli_read(desc, ctlhi));
- channel_set_bit(dw, CH_EN, dwc->mask);
-
- /* Move pointer to next descriptor */
-@@ -213,6 +209,7 @@ static inline void dwc_do_single_block(s
- static void dwc_dostart(struct dw_dma_chan *dwc, struct dw_desc *first)
- {
- struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-+ u8 lms = DWC_LLP_LMS(dwc->m_master);
- unsigned long was_soft_llp;
-
- /* ASSERT: channel is idle */
-@@ -237,7 +234,7 @@ static void dwc_dostart(struct dw_dma_ch
-
- dwc_initialize(dwc);
-
-- dwc->residue = first->total_len;
-+ first->residue = first->total_len;
- dwc->tx_node_active = &first->tx_list;
-
- /* Submit first block */
-@@ -248,9 +245,8 @@ static void dwc_dostart(struct dw_dma_ch
-
- dwc_initialize(dwc);
-
-- channel_writel(dwc, LLP, first->txd.phys);
-- channel_writel(dwc, CTL_LO,
-- DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
-+ channel_writel(dwc, LLP, first->txd.phys | lms);
-+ channel_writel(dwc, CTL_LO, DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
- channel_writel(dwc, CTL_HI, 0);
- channel_set_bit(dw, CH_EN, dwc->mask);
- }
-@@ -293,11 +289,7 @@ dwc_descriptor_complete(struct dw_dma_ch
- list_for_each_entry(child, &desc->tx_list, desc_node)
- async_tx_ack(&child->txd);
- async_tx_ack(&desc->txd);
--
-- list_splice_init(&desc->tx_list, &dwc->free_list);
-- list_move(&desc->desc_node, &dwc->free_list);
--
-- dma_descriptor_unmap(txd);
-+ dwc_desc_put(dwc, desc);
- spin_unlock_irqrestore(&dwc->lock, flags);
-
- if (callback)
-@@ -368,11 +360,11 @@ static void dwc_scan_descriptors(struct
-
- head = &desc->tx_list;
- if (active != head) {
-- /* Update desc to reflect last sent one */
-- if (active != head->next)
-- desc = to_dw_desc(active->prev);
--
-- dwc->residue -= desc->len;
-+ /* Update residue to reflect last sent descriptor */
-+ if (active == head->next)
-+ desc->residue -= desc->len;
-+ else
-+ desc->residue -= to_dw_desc(active->prev)->len;
-
- child = to_dw_desc(active);
-
-@@ -387,8 +379,6 @@ static void dwc_scan_descriptors(struct
- clear_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags);
- }
-
-- dwc->residue = 0;
--
- spin_unlock_irqrestore(&dwc->lock, flags);
-
- dwc_complete_all(dw, dwc);
-@@ -396,7 +386,6 @@ static void dwc_scan_descriptors(struct
- }
-
- if (list_empty(&dwc->active_list)) {
-- dwc->residue = 0;
- spin_unlock_irqrestore(&dwc->lock, flags);
- return;
- }
-@@ -411,31 +400,31 @@ static void dwc_scan_descriptors(struct
-
- list_for_each_entry_safe(desc, _desc, &dwc->active_list, desc_node) {
- /* Initial residue value */
-- dwc->residue = desc->total_len;
-+ desc->residue = desc->total_len;
-
- /* Check first descriptors addr */
-- if (desc->txd.phys == llp) {
-+ if (desc->txd.phys == DWC_LLP_LOC(llp)) {
- spin_unlock_irqrestore(&dwc->lock, flags);
- return;
- }
-
- /* Check first descriptors llp */
-- if (desc->lli.llp == llp) {
-+ if (lli_read(desc, llp) == llp) {
- /* This one is currently in progress */
-- dwc->residue -= dwc_get_sent(dwc);
-+ desc->residue -= dwc_get_sent(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
- return;
- }
-
-- dwc->residue -= desc->len;
-+ desc->residue -= desc->len;
- list_for_each_entry(child, &desc->tx_list, desc_node) {
-- if (child->lli.llp == llp) {
-+ if (lli_read(child, llp) == llp) {
- /* Currently in progress */
-- dwc->residue -= dwc_get_sent(dwc);
-+ desc->residue -= dwc_get_sent(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
- return;
- }
-- dwc->residue -= child->len;
-+ desc->residue -= child->len;
- }
-
- /*
-@@ -457,10 +446,14 @@ static void dwc_scan_descriptors(struct
- spin_unlock_irqrestore(&dwc->lock, flags);
- }
-
--static inline void dwc_dump_lli(struct dw_dma_chan *dwc, struct dw_lli *lli)
-+static inline void dwc_dump_lli(struct dw_dma_chan *dwc, struct dw_desc *desc)
- {
- dev_crit(chan2dev(&dwc->chan), " desc: s0x%x d0x%x l0x%x c0x%x:%x\n",
-- lli->sar, lli->dar, lli->llp, lli->ctlhi, lli->ctllo);
-+ lli_read(desc, sar),
-+ lli_read(desc, dar),
-+ lli_read(desc, llp),
-+ lli_read(desc, ctlhi),
-+ lli_read(desc, ctllo));
- }
-
- static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc)
-@@ -496,9 +489,9 @@ static void dwc_handle_error(struct dw_d
- */
- dev_WARN(chan2dev(&dwc->chan), "Bad descriptor submitted for DMA!\n"
- " cookie: %d\n", bad_desc->txd.cookie);
-- dwc_dump_lli(dwc, &bad_desc->lli);
-+ dwc_dump_lli(dwc, bad_desc);
- list_for_each_entry(child, &bad_desc->tx_list, desc_node)
-- dwc_dump_lli(dwc, &child->lli);
-+ dwc_dump_lli(dwc, child);
-
- spin_unlock_irqrestore(&dwc->lock, flags);
-
-@@ -549,7 +542,7 @@ static void dwc_handle_cyclic(struct dw_
- */
- if (unlikely(status_err & dwc->mask) ||
- unlikely(status_xfer & dwc->mask)) {
-- int i;
-+ unsigned int i;
-
- dev_err(chan2dev(&dwc->chan),
- "cyclic DMA unexpected %s interrupt, stopping DMA transfer\n",
-@@ -571,7 +564,7 @@ static void dwc_handle_cyclic(struct dw_
- dma_writel(dw, CLEAR.XFER, dwc->mask);
-
- for (i = 0; i < dwc->cdesc->periods; i++)
-- dwc_dump_lli(dwc, &dwc->cdesc->desc[i]->lli);
-+ dwc_dump_lli(dwc, dwc->cdesc->desc[i]);
-
- spin_unlock_irqrestore(&dwc->lock, flags);
- }
-@@ -589,7 +582,7 @@ static void dw_dma_tasklet(unsigned long
- u32 status_block;
- u32 status_xfer;
- u32 status_err;
-- int i;
-+ unsigned int i;
-
- status_block = dma_readl(dw, RAW.BLOCK);
- status_xfer = dma_readl(dw, RAW.XFER);
-@@ -616,12 +609,17 @@ static void dw_dma_tasklet(unsigned long
- static irqreturn_t dw_dma_interrupt(int irq, void *dev_id)
- {
- struct dw_dma *dw = dev_id;
-- u32 status = dma_readl(dw, STATUS_INT);
-+ u32 status;
-+
-+ /* Check if we have any interrupt from the DMAC which is not in use */
-+ if (!dw->in_use)
-+ return IRQ_NONE;
-
-+ status = dma_readl(dw, STATUS_INT);
- dev_vdbg(dw->dma.dev, "%s: status=0x%x\n", __func__, status);
-
- /* Check if we have any interrupt from the DMAC */
-- if (!status || !dw->in_use)
-+ if (!status)
- return IRQ_NONE;
-
- /*
-@@ -653,30 +651,6 @@ static irqreturn_t dw_dma_interrupt(int
-
- /*----------------------------------------------------------------------*/
-
--static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx)
--{
-- struct dw_desc *desc = txd_to_dw_desc(tx);
-- struct dw_dma_chan *dwc = to_dw_dma_chan(tx->chan);
-- dma_cookie_t cookie;
-- unsigned long flags;
--
-- spin_lock_irqsave(&dwc->lock, flags);
-- cookie = dma_cookie_assign(tx);
--
-- /*
-- * REVISIT: We should attempt to chain as many descriptors as
-- * possible, perhaps even appending to those already submitted
-- * for DMA. But this is hard to do in a race-free manner.
-- */
--
-- dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__, desc->txd.cookie);
-- list_add_tail(&desc->desc_node, &dwc->queue);
--
-- spin_unlock_irqrestore(&dwc->lock, flags);
--
-- return cookie;
--}
--
- static struct dma_async_tx_descriptor *
- dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
- size_t len, unsigned long flags)
-@@ -688,10 +662,12 @@ dwc_prep_dma_memcpy(struct dma_chan *cha
- struct dw_desc *prev;
- size_t xfer_count;
- size_t offset;
-+ u8 m_master = dwc->m_master;
- unsigned int src_width;
- unsigned int dst_width;
-- unsigned int data_width;
-+ unsigned int data_width = dw->pdata->data_width[m_master];
- u32 ctllo;
-+ u8 lms = DWC_LLP_LMS(m_master);
-
- dev_vdbg(chan2dev(chan),
- "%s: d%pad s%pad l0x%zx f0x%lx\n", __func__,
-@@ -704,11 +680,7 @@ dwc_prep_dma_memcpy(struct dma_chan *cha
-
- dwc->direction = DMA_MEM_TO_MEM;
-
-- data_width = min_t(unsigned int, dw->data_width[dwc->src_master],
-- dw->data_width[dwc->dst_master]);
--
-- src_width = dst_width = min_t(unsigned int, data_width,
-- dwc_fast_ffs(src | dest | len));
-+ src_width = dst_width = __ffs(data_width | src | dest | len);
-
- ctllo = DWC_DEFAULT_CTLLO(chan)
- | DWC_CTLL_DST_WIDTH(dst_width)
-@@ -726,27 +698,27 @@ dwc_prep_dma_memcpy(struct dma_chan *cha
- if (!desc)
- goto err_desc_get;
-
-- desc->lli.sar = src + offset;
-- desc->lli.dar = dest + offset;
-- desc->lli.ctllo = ctllo;
-- desc->lli.ctlhi = xfer_count;
-+ lli_write(desc, sar, src + offset);
-+ lli_write(desc, dar, dest + offset);
-+ lli_write(desc, ctllo, ctllo);
-+ lli_write(desc, ctlhi, xfer_count);
- desc->len = xfer_count << src_width;
-
- if (!first) {
- first = desc;
- } else {
-- prev->lli.llp = desc->txd.phys;
-- list_add_tail(&desc->desc_node,
-- &first->tx_list);
-+ lli_write(prev, llp, desc->txd.phys | lms);
-+ list_add_tail(&desc->desc_node, &first->tx_list);
- }
- prev = desc;
- }
-
- if (flags & DMA_PREP_INTERRUPT)
- /* Trigger interrupt after last block */
-- prev->lli.ctllo |= DWC_CTLL_INT_EN;
-+ lli_set(prev, ctllo, DWC_CTLL_INT_EN);
-
- prev->lli.llp = 0;
-+ lli_clear(prev, ctllo, DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
- first->txd.flags = flags;
- first->total_len = len;
-
-@@ -768,10 +740,12 @@ dwc_prep_slave_sg(struct dma_chan *chan,
- struct dw_desc *prev;
- struct dw_desc *first;
- u32 ctllo;
-+ u8 m_master = dwc->m_master;
-+ u8 lms = DWC_LLP_LMS(m_master);
- dma_addr_t reg;
- unsigned int reg_width;
- unsigned int mem_width;
-- unsigned int data_width;
-+ unsigned int data_width = dw->pdata->data_width[m_master];
- unsigned int i;
- struct scatterlist *sg;
- size_t total_len = 0;
-@@ -797,8 +771,6 @@ dwc_prep_slave_sg(struct dma_chan *chan,
- ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
- DWC_CTLL_FC(DW_DMA_FC_D_M2P);
-
-- data_width = dw->data_width[dwc->src_master];
--
- for_each_sg(sgl, sg, sg_len, i) {
- struct dw_desc *desc;
- u32 len, dlen, mem;
-@@ -806,17 +778,16 @@ dwc_prep_slave_sg(struct dma_chan *chan,
- mem = sg_dma_address(sg);
- len = sg_dma_len(sg);
-
-- mem_width = min_t(unsigned int,
-- data_width, dwc_fast_ffs(mem | len));
-+ mem_width = __ffs(data_width | mem | len);
-
- slave_sg_todev_fill_desc:
- desc = dwc_desc_get(dwc);
- if (!desc)
- goto err_desc_get;
-
-- desc->lli.sar = mem;
-- desc->lli.dar = reg;
-- desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width);
-+ lli_write(desc, sar, mem);
-+ lli_write(desc, dar, reg);
-+ lli_write(desc, ctllo, ctllo | DWC_CTLL_SRC_WIDTH(mem_width));
- if ((len >> mem_width) > dwc->block_size) {
- dlen = dwc->block_size << mem_width;
- mem += dlen;
-@@ -826,15 +797,14 @@ slave_sg_todev_fill_desc:
- len = 0;
- }
-
-- desc->lli.ctlhi = dlen >> mem_width;
-+ lli_write(desc, ctlhi, dlen >> mem_width);
- desc->len = dlen;
-
- if (!first) {
- first = desc;
- } else {
-- prev->lli.llp = desc->txd.phys;
-- list_add_tail(&desc->desc_node,
-- &first->tx_list);
-+ lli_write(prev, llp, desc->txd.phys | lms);
-+ list_add_tail(&desc->desc_node, &first->tx_list);
- }
- prev = desc;
- total_len += dlen;
-@@ -854,8 +824,6 @@ slave_sg_todev_fill_desc:
- ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
- DWC_CTLL_FC(DW_DMA_FC_D_P2M);
-
-- data_width = dw->data_width[dwc->dst_master];
--
- for_each_sg(sgl, sg, sg_len, i) {
- struct dw_desc *desc;
- u32 len, dlen, mem;
-@@ -863,17 +831,16 @@ slave_sg_todev_fill_desc:
- mem = sg_dma_address(sg);
- len = sg_dma_len(sg);
-
-- mem_width = min_t(unsigned int,
-- data_width, dwc_fast_ffs(mem | len));
-+ mem_width = __ffs(data_width | mem | len);
-
- slave_sg_fromdev_fill_desc:
- desc = dwc_desc_get(dwc);
- if (!desc)
- goto err_desc_get;
-
-- desc->lli.sar = reg;
-- desc->lli.dar = mem;
-- desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width);
-+ lli_write(desc, sar, reg);
-+ lli_write(desc, dar, mem);
-+ lli_write(desc, ctllo, ctllo | DWC_CTLL_DST_WIDTH(mem_width));
- if ((len >> reg_width) > dwc->block_size) {
- dlen = dwc->block_size << reg_width;
- mem += dlen;
-@@ -882,15 +849,14 @@ slave_sg_fromdev_fill_desc:
- dlen = len;
- len = 0;
- }
-- desc->lli.ctlhi = dlen >> reg_width;
-+ lli_write(desc, ctlhi, dlen >> reg_width);
- desc->len = dlen;
-
- if (!first) {
- first = desc;
- } else {
-- prev->lli.llp = desc->txd.phys;
-- list_add_tail(&desc->desc_node,
-- &first->tx_list);
-+ lli_write(prev, llp, desc->txd.phys | lms);
-+ list_add_tail(&desc->desc_node, &first->tx_list);
- }
- prev = desc;
- total_len += dlen;
-@@ -905,9 +871,10 @@ slave_sg_fromdev_fill_desc:
-
- if (flags & DMA_PREP_INTERRUPT)
- /* Trigger interrupt after last block */
-- prev->lli.ctllo |= DWC_CTLL_INT_EN;
-+ lli_set(prev, ctllo, DWC_CTLL_INT_EN);
-
- prev->lli.llp = 0;
-+ lli_clear(prev, ctllo, DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
- first->total_len = total_len;
-
- return &first->txd;
-@@ -932,8 +899,8 @@ bool dw_dma_filter(struct dma_chan *chan
- dwc->src_id = dws->src_id;
- dwc->dst_id = dws->dst_id;
-
-- dwc->src_master = dws->src_master;
-- dwc->dst_master = dws->dst_master;
-+ dwc->m_master = dws->m_master;
-+ dwc->p_master = dws->p_master;
-
- return true;
- }
-@@ -986,7 +953,7 @@ static int dwc_pause(struct dma_chan *ch
- while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY) && count--)
- udelay(2);
-
-- dwc->paused = true;
-+ set_bit(DW_DMA_IS_PAUSED, &dwc->flags);
-
- spin_unlock_irqrestore(&dwc->lock, flags);
-
-@@ -999,7 +966,7 @@ static inline void dwc_chan_resume(struc
-
- channel_writel(dwc, CFG_LO, cfglo & ~DWC_CFGL_CH_SUSP);
-
-- dwc->paused = false;
-+ clear_bit(DW_DMA_IS_PAUSED, &dwc->flags);
- }
-
- static int dwc_resume(struct dma_chan *chan)
-@@ -1007,12 +974,10 @@ static int dwc_resume(struct dma_chan *c
- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
- unsigned long flags;
-
-- if (!dwc->paused)
-- return 0;
--
- spin_lock_irqsave(&dwc->lock, flags);
-
-- dwc_chan_resume(dwc);
-+ if (test_bit(DW_DMA_IS_PAUSED, &dwc->flags))
-+ dwc_chan_resume(dwc);
-
- spin_unlock_irqrestore(&dwc->lock, flags);
-
-@@ -1048,16 +1013,37 @@ static int dwc_terminate_all(struct dma_
- return 0;
- }
-
--static inline u32 dwc_get_residue(struct dw_dma_chan *dwc)
-+static struct dw_desc *dwc_find_desc(struct dw_dma_chan *dwc, dma_cookie_t c)
-+{
-+ struct dw_desc *desc;
-+
-+ list_for_each_entry(desc, &dwc->active_list, desc_node)
-+ if (desc->txd.cookie == c)
-+ return desc;
-+
-+ return NULL;
-+}
-+
-+static u32 dwc_get_residue(struct dw_dma_chan *dwc, dma_cookie_t cookie)
- {
-+ struct dw_desc *desc;
- unsigned long flags;
- u32 residue;
-
- spin_lock_irqsave(&dwc->lock, flags);
-
-- residue = dwc->residue;
-- if (test_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags) && residue)
-- residue -= dwc_get_sent(dwc);
-+ desc = dwc_find_desc(dwc, cookie);
-+ if (desc) {
-+ if (desc == dwc_first_active(dwc)) {
-+ residue = desc->residue;
-+ if (test_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags) && residue)
-+ residue -= dwc_get_sent(dwc);
-+ } else {
-+ residue = desc->total_len;
-+ }
-+ } else {
-+ residue = 0;
-+ }
-
- spin_unlock_irqrestore(&dwc->lock, flags);
- return residue;
-@@ -1078,10 +1064,12 @@ dwc_tx_status(struct dma_chan *chan,
- dwc_scan_descriptors(to_dw_dma(chan->device), dwc);
-
- ret = dma_cookie_status(chan, cookie, txstate);
-- if (ret != DMA_COMPLETE)
-- dma_set_residue(txstate, dwc_get_residue(dwc));
-+ if (ret == DMA_COMPLETE)
-+ return ret;
-+
-+ dma_set_residue(txstate, dwc_get_residue(dwc, cookie));
-
-- if (dwc->paused && ret == DMA_IN_PROGRESS)
-+ if (test_bit(DW_DMA_IS_PAUSED, &dwc->flags) && ret == DMA_IN_PROGRESS)
- return DMA_PAUSED;
-
- return ret;
-@@ -1102,7 +1090,7 @@ static void dwc_issue_pending(struct dma
-
- static void dw_dma_off(struct dw_dma *dw)
- {
-- int i;
-+ unsigned int i;
-
- dma_writel(dw, CFG, 0);
-
-@@ -1116,7 +1104,7 @@ static void dw_dma_off(struct dw_dma *dw
- cpu_relax();
-
- for (i = 0; i < dw->dma.chancnt; i++)
-- dw->chan[i].initialized = false;
-+ clear_bit(DW_DMA_IS_INITIALIZED, &dw->chan[i].flags);
- }
-
- static void dw_dma_on(struct dw_dma *dw)
-@@ -1128,9 +1116,6 @@ static int dwc_alloc_chan_resources(stru
- {
- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
- struct dw_dma *dw = to_dw_dma(chan->device);
-- struct dw_desc *desc;
-- int i;
-- unsigned long flags;
-
- dev_vdbg(chan2dev(chan), "%s\n", __func__);
-
-@@ -1161,48 +1146,13 @@ static int dwc_alloc_chan_resources(stru
- dw_dma_on(dw);
- dw->in_use |= dwc->mask;
-
-- spin_lock_irqsave(&dwc->lock, flags);
-- i = dwc->descs_allocated;
-- while (dwc->descs_allocated < NR_DESCS_PER_CHANNEL) {
-- dma_addr_t phys;
--
-- spin_unlock_irqrestore(&dwc->lock, flags);
--
-- desc = dma_pool_alloc(dw->desc_pool, GFP_ATOMIC, &phys);
-- if (!desc)
-- goto err_desc_alloc;
--
-- memset(desc, 0, sizeof(struct dw_desc));
--
-- INIT_LIST_HEAD(&desc->tx_list);
-- dma_async_tx_descriptor_init(&desc->txd, chan);
-- desc->txd.tx_submit = dwc_tx_submit;
-- desc->txd.flags = DMA_CTRL_ACK;
-- desc->txd.phys = phys;
--
-- dwc_desc_put(dwc, desc);
--
-- spin_lock_irqsave(&dwc->lock, flags);
-- i = ++dwc->descs_allocated;
-- }
--
-- spin_unlock_irqrestore(&dwc->lock, flags);
--
-- dev_dbg(chan2dev(chan), "%s: allocated %d descriptors\n", __func__, i);
--
-- return i;
--
--err_desc_alloc:
-- dev_info(chan2dev(chan), "only allocated %d descriptors\n", i);
--
-- return i;
-+ return 0;
- }
-
- static void dwc_free_chan_resources(struct dma_chan *chan)
- {
- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
- struct dw_dma *dw = to_dw_dma(chan->device);
-- struct dw_desc *desc, *_desc;
- unsigned long flags;
- LIST_HEAD(list);
-
-@@ -1215,17 +1165,15 @@ static void dwc_free_chan_resources(stru
- BUG_ON(dma_readl(to_dw_dma(chan->device), CH_EN) & dwc->mask);
-
- spin_lock_irqsave(&dwc->lock, flags);
-- list_splice_init(&dwc->free_list, &list);
-- dwc->descs_allocated = 0;
-
- /* Clear custom channel configuration */
- dwc->src_id = 0;
- dwc->dst_id = 0;
-
-- dwc->src_master = 0;
-- dwc->dst_master = 0;
-+ dwc->m_master = 0;
-+ dwc->p_master = 0;
-
-- dwc->initialized = false;
-+ clear_bit(DW_DMA_IS_INITIALIZED, &dwc->flags);
-
- /* Disable interrupts */
- channel_clear_bit(dw, MASK.XFER, dwc->mask);
-@@ -1239,11 +1187,6 @@ static void dwc_free_chan_resources(stru
- if (!dw->in_use)
- dw_dma_off(dw);
-
-- list_for_each_entry_safe(desc, _desc, &list, desc_node) {
-- dev_vdbg(chan2dev(chan), " freeing descriptor %p\n", desc);
-- dma_pool_free(dw->desc_pool, desc, desc->txd.phys);
-- }
--
- dev_vdbg(chan2dev(chan), "%s: done\n", __func__);
- }
-
-@@ -1321,6 +1264,7 @@ struct dw_cyclic_desc *dw_dma_cyclic_pre
- struct dw_cyclic_desc *retval = NULL;
- struct dw_desc *desc;
- struct dw_desc *last = NULL;
-+ u8 lms = DWC_LLP_LMS(dwc->m_master);
- unsigned long was_cyclic;
- unsigned int reg_width;
- unsigned int periods;
-@@ -1374,9 +1318,6 @@ struct dw_cyclic_desc *dw_dma_cyclic_pre
-
- retval = ERR_PTR(-ENOMEM);
-
-- if (periods > NR_DESCS_PER_CHANNEL)
-- goto out_err;
--
- cdesc = kzalloc(sizeof(struct dw_cyclic_desc), GFP_KERNEL);
- if (!cdesc)
- goto out_err;
-@@ -1392,50 +1333,50 @@ struct dw_cyclic_desc *dw_dma_cyclic_pre
-
- switch (direction) {
- case DMA_MEM_TO_DEV:
-- desc->lli.dar = sconfig->dst_addr;
-- desc->lli.sar = buf_addr + (period_len * i);
-- desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan)
-- | DWC_CTLL_DST_WIDTH(reg_width)
-- | DWC_CTLL_SRC_WIDTH(reg_width)
-- | DWC_CTLL_DST_FIX
-- | DWC_CTLL_SRC_INC
-- | DWC_CTLL_INT_EN);
--
-- desc->lli.ctllo |= sconfig->device_fc ?
-- DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
-- DWC_CTLL_FC(DW_DMA_FC_D_M2P);
-+ lli_write(desc, dar, sconfig->dst_addr);
-+ lli_write(desc, sar, buf_addr + period_len * i);
-+ lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan)
-+ | DWC_CTLL_DST_WIDTH(reg_width)
-+ | DWC_CTLL_SRC_WIDTH(reg_width)
-+ | DWC_CTLL_DST_FIX
-+ | DWC_CTLL_SRC_INC
-+ | DWC_CTLL_INT_EN));
-+
-+ lli_set(desc, ctllo, sconfig->device_fc ?
-+ DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
-+ DWC_CTLL_FC(DW_DMA_FC_D_M2P));
-
- break;
- case DMA_DEV_TO_MEM:
-- desc->lli.dar = buf_addr + (period_len * i);
-- desc->lli.sar = sconfig->src_addr;
-- desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan)
-- | DWC_CTLL_SRC_WIDTH(reg_width)
-- | DWC_CTLL_DST_WIDTH(reg_width)
-- | DWC_CTLL_DST_INC
-- | DWC_CTLL_SRC_FIX
-- | DWC_CTLL_INT_EN);
--
-- desc->lli.ctllo |= sconfig->device_fc ?
-- DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
-- DWC_CTLL_FC(DW_DMA_FC_D_P2M);
-+ lli_write(desc, dar, buf_addr + period_len * i);
-+ lli_write(desc, sar, sconfig->src_addr);
-+ lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan)
-+ | DWC_CTLL_SRC_WIDTH(reg_width)
-+ | DWC_CTLL_DST_WIDTH(reg_width)
-+ | DWC_CTLL_DST_INC
-+ | DWC_CTLL_SRC_FIX
-+ | DWC_CTLL_INT_EN));
-+
-+ lli_set(desc, ctllo, sconfig->device_fc ?
-+ DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
-+ DWC_CTLL_FC(DW_DMA_FC_D_P2M));
-
- break;
- default:
- break;
- }
-
-- desc->lli.ctlhi = (period_len >> reg_width);
-+ lli_write(desc, ctlhi, period_len >> reg_width);
- cdesc->desc[i] = desc;
-
- if (last)
-- last->lli.llp = desc->txd.phys;
-+ lli_write(last, llp, desc->txd.phys | lms);
-
- last = desc;
- }
-
- /* Let's make a cyclic list */
-- last->lli.llp = cdesc->desc[0]->txd.phys;
-+ lli_write(last, llp, cdesc->desc[0]->txd.phys | lms);
-
- dev_dbg(chan2dev(&dwc->chan),
- "cyclic prepared buf %pad len %zu period %zu periods %d\n",
-@@ -1466,7 +1407,7 @@ void dw_dma_cyclic_free(struct dma_chan
- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
- struct dw_dma *dw = to_dw_dma(dwc->chan.device);
- struct dw_cyclic_desc *cdesc = dwc->cdesc;
-- int i;
-+ unsigned int i;
- unsigned long flags;
-
- dev_dbg(chan2dev(&dwc->chan), "%s\n", __func__);
-@@ -1490,32 +1431,38 @@ void dw_dma_cyclic_free(struct dma_chan
- kfree(cdesc->desc);
- kfree(cdesc);
-
-+ dwc->cdesc = NULL;
-+
- clear_bit(DW_DMA_IS_CYCLIC, &dwc->flags);
- }
- EXPORT_SYMBOL(dw_dma_cyclic_free);
-
- /*----------------------------------------------------------------------*/
-
--int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
-+int dw_dma_probe(struct dw_dma_chip *chip)
- {
-+ struct dw_dma_platform_data *pdata;
- struct dw_dma *dw;
- bool autocfg = false;
- unsigned int dw_params;
-- unsigned int max_blk_size = 0;
-+ unsigned int i;
- int err;
-- int i;
-
- dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
- if (!dw)
- return -ENOMEM;
-
-+ dw->pdata = devm_kzalloc(chip->dev, sizeof(*dw->pdata), GFP_KERNEL);
-+ if (!dw->pdata)
-+ return -ENOMEM;
-+
- dw->regs = chip->regs;
- chip->dw = dw;
-
- pm_runtime_get_sync(chip->dev);
-
-- if (!pdata) {
-- dw_params = dma_read_byaddr(chip->regs, DW_PARAMS);
-+ if (!chip->pdata) {
-+ dw_params = dma_readl(dw, DW_PARAMS);
- dev_dbg(chip->dev, "DW_PARAMS: 0x%08x\n", dw_params);
-
- autocfg = dw_params >> DW_PARAMS_EN & 1;
-@@ -1524,29 +1471,31 @@ int dw_dma_probe(struct dw_dma_chip *chi
- goto err_pdata;
- }
-
-- pdata = devm_kzalloc(chip->dev, sizeof(*pdata), GFP_KERNEL);
-- if (!pdata) {
-- err = -ENOMEM;
-- goto err_pdata;
-- }
-+ /* Reassign the platform data pointer */
-+ pdata = dw->pdata;
-
- /* Get hardware configuration parameters */
- pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN & 7) + 1;
- pdata->nr_masters = (dw_params >> DW_PARAMS_NR_MASTER & 3) + 1;
- for (i = 0; i < pdata->nr_masters; i++) {
- pdata->data_width[i] =
-- (dw_params >> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
-+ 4 << (dw_params >> DW_PARAMS_DATA_WIDTH(i) & 3);
- }
-- max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
-+ pdata->block_size = dma_readl(dw, MAX_BLK_SIZE);
-
- /* Fill platform data with the default values */
- pdata->is_private = true;
- pdata->is_memcpy = true;
- pdata->chan_allocation_order = CHAN_ALLOCATION_ASCENDING;
- pdata->chan_priority = CHAN_PRIORITY_ASCENDING;
-- } else if (pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) {
-+ } else if (chip->pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) {
- err = -EINVAL;
- goto err_pdata;
-+ } else {
-+ memcpy(dw->pdata, chip->pdata, sizeof(*dw->pdata));
-+
-+ /* Reassign the platform data pointer */
-+ pdata = dw->pdata;
- }
-
- dw->chan = devm_kcalloc(chip->dev, pdata->nr_channels, sizeof(*dw->chan),
-@@ -1556,11 +1505,6 @@ int dw_dma_probe(struct dw_dma_chip *chi
- goto err_pdata;
- }
-
-- /* Get hardware configuration parameters */
-- dw->nr_masters = pdata->nr_masters;
-- for (i = 0; i < dw->nr_masters; i++)
-- dw->data_width[i] = pdata->data_width[i];
--
- /* Calculate all channel mask before DMA setup */
- dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
-
-@@ -1607,7 +1551,6 @@ int dw_dma_probe(struct dw_dma_chip *chi
-
- INIT_LIST_HEAD(&dwc->active_list);
- INIT_LIST_HEAD(&dwc->queue);
-- INIT_LIST_HEAD(&dwc->free_list);
-
- channel_clear_bit(dw, CH_EN, dwc->mask);
-
-@@ -1615,11 +1558,9 @@ int dw_dma_probe(struct dw_dma_chip *chi
-
- /* Hardware configuration */
- if (autocfg) {
-- unsigned int dwc_params;
- unsigned int r = DW_DMA_MAX_NR_CHANNELS - i - 1;
-- void __iomem *addr = chip->regs + r * sizeof(u32);
--
-- dwc_params = dma_read_byaddr(addr, DWC_PARAMS);
-+ void __iomem *addr = &__dw_regs(dw)->DWC_PARAMS[r];
-+ unsigned int dwc_params = dma_readl_native(addr);
-
- dev_dbg(chip->dev, "DWC_PARAMS[%d]: 0x%08x\n", i,
- dwc_params);
-@@ -1630,16 +1571,15 @@ int dw_dma_probe(struct dw_dma_chip *chi
- * up to 0x0a for 4095.
- */
- dwc->block_size =
-- (4 << ((max_blk_size >> 4 * i) & 0xf)) - 1;
-+ (4 << ((pdata->block_size >> 4 * i) & 0xf)) - 1;
- dwc->nollp =
- (dwc_params >> DWC_PARAMS_MBLK_EN & 0x1) == 0;
- } else {
- dwc->block_size = pdata->block_size;
-
- /* Check if channel supports multi block transfer */
-- channel_writel(dwc, LLP, 0xfffffffc);
-- dwc->nollp =
-- (channel_readl(dwc, LLP) & 0xfffffffc) == 0;
-+ channel_writel(dwc, LLP, DWC_LLP_LOC(0xffffffff));
-+ dwc->nollp = DWC_LLP_LOC(channel_readl(dwc, LLP)) == 0;
- channel_writel(dwc, LLP, 0);
- }
- }
---- a/drivers/dma/dw/pci.c
-+++ b/drivers/dma/dw/pci.c
-@@ -17,8 +17,8 @@
-
- static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
- {
-+ const struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
- struct dw_dma_chip *chip;
-- struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
- int ret;
-
- ret = pcim_enable_device(pdev);
-@@ -49,8 +49,9 @@ static int dw_pci_probe(struct pci_dev *
- chip->dev = &pdev->dev;
- chip->regs = pcim_iomap_table(pdev)[0];
- chip->irq = pdev->irq;
-+ chip->pdata = pdata;
-
-- ret = dw_dma_probe(chip, pdata);
-+ ret = dw_dma_probe(chip);
- if (ret)
- return ret;
-
-@@ -108,6 +109,10 @@ static const struct pci_device_id dw_pci
-
- /* Haswell */
- { PCI_VDEVICE(INTEL, 0x9c60) },
-+
-+ /* Broadwell */
-+ { PCI_VDEVICE(INTEL, 0x9ce0) },
-+
- { }
- };
- MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
---- a/drivers/dma/dw/platform.c
-+++ b/drivers/dma/dw/platform.c
-@@ -42,13 +42,13 @@ static struct dma_chan *dw_dma_of_xlate(
-
- slave.src_id = dma_spec->args[0];
- slave.dst_id = dma_spec->args[0];
-- slave.src_master = dma_spec->args[1];
-- slave.dst_master = dma_spec->args[2];
-+ slave.m_master = dma_spec->args[1];
-+ slave.p_master = dma_spec->args[2];
-
- if (WARN_ON(slave.src_id >= DW_DMA_MAX_NR_REQUESTS ||
- slave.dst_id >= DW_DMA_MAX_NR_REQUESTS ||
-- slave.src_master >= dw->nr_masters ||
-- slave.dst_master >= dw->nr_masters))
-+ slave.m_master >= dw->pdata->nr_masters ||
-+ slave.p_master >= dw->pdata->nr_masters))
- return NULL;
-
- dma_cap_zero(cap);
-@@ -66,8 +66,8 @@ static bool dw_dma_acpi_filter(struct dm
- .dma_dev = dma_spec->dev,
- .src_id = dma_spec->slave_id,
- .dst_id = dma_spec->slave_id,
-- .src_master = 1,
-- .dst_master = 0,
-+ .m_master = 0,
-+ .p_master = 1,
- };
-
- return dw_dma_filter(chan, &slave);
-@@ -103,18 +103,28 @@ dw_dma_parse_dt(struct platform_device *
- struct device_node *np = pdev->dev.of_node;
- struct dw_dma_platform_data *pdata;
- u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
-+ u32 nr_masters;
-+ u32 nr_channels;
-
- if (!np) {
- dev_err(&pdev->dev, "Missing DT data\n");
- return NULL;
- }
-
-+ if (of_property_read_u32(np, "dma-masters", &nr_masters))
-+ return NULL;
-+ if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS)
-+ return NULL;
-+
-+ if (of_property_read_u32(np, "dma-channels", &nr_channels))
-+ return NULL;
-+
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return NULL;
-
-- if (of_property_read_u32(np, "dma-channels", &pdata->nr_channels))
-- return NULL;
-+ pdata->nr_masters = nr_masters;
-+ pdata->nr_channels = nr_channels;
-
- if (of_property_read_bool(np, "is_private"))
- pdata->is_private = true;
-@@ -128,17 +138,13 @@ dw_dma_parse_dt(struct platform_device *
- if (!of_property_read_u32(np, "block_size", &tmp))
- pdata->block_size = tmp;
-
-- if (!of_property_read_u32(np, "dma-masters", &tmp)) {
-- if (tmp > DW_DMA_MAX_NR_MASTERS)
-- return NULL;
--
-- pdata->nr_masters = tmp;
-- }
--
-- if (!of_property_read_u32_array(np, "data_width", arr,
-- pdata->nr_masters))
-- for (tmp = 0; tmp < pdata->nr_masters; tmp++)
-+ if (!of_property_read_u32_array(np, "data-width", arr, nr_masters)) {
-+ for (tmp = 0; tmp < nr_masters; tmp++)
- pdata->data_width[tmp] = arr[tmp];
-+ } else if (!of_property_read_u32_array(np, "data_width", arr, nr_masters)) {
-+ for (tmp = 0; tmp < nr_masters; tmp++)
-+ pdata->data_width[tmp] = BIT(arr[tmp] & 0x07);
-+ }
-
- return pdata;
- }
-@@ -155,8 +161,7 @@ static int dw_probe(struct platform_devi
- struct dw_dma_chip *chip;
- struct device *dev = &pdev->dev;
- struct resource *mem;
-- const struct acpi_device_id *id;
-- struct dw_dma_platform_data *pdata;
-+ const struct dw_dma_platform_data *pdata;
- int err;
-
- chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
-@@ -179,13 +184,9 @@ static int dw_probe(struct platform_devi
- pdata = dev_get_platdata(dev);
- if (!pdata)
- pdata = dw_dma_parse_dt(pdev);
-- if (!pdata && has_acpi_companion(dev)) {
-- id = acpi_match_device(dev->driver->acpi_match_table, dev);
-- if (id)
-- pdata = (struct dw_dma_platform_data *)id->driver_data;
-- }
-
- chip->dev = dev;
-+ chip->pdata = pdata;
-
- chip->clk = devm_clk_get(chip->dev, "hclk");
- if (IS_ERR(chip->clk))
-@@ -196,7 +197,7 @@ static int dw_probe(struct platform_devi
-
- pm_runtime_enable(&pdev->dev);
-
-- err = dw_dma_probe(chip, pdata);
-+ err = dw_dma_probe(chip);
- if (err)
- goto err_dw_dma_probe;
-
-@@ -239,7 +240,19 @@ static void dw_shutdown(struct platform_
- {
- struct dw_dma_chip *chip = platform_get_drvdata(pdev);
-
-+ /*
-+ * We have to call dw_dma_disable() to stop any ongoing transfer. On
-+ * some platforms we can't do that since DMA device is powered off.
-+ * Moreover we have no possibility to check if the platform is affected
-+ * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put()
-+ * unconditionally. On the other hand we can't use
-+ * pm_runtime_suspended() because runtime PM framework is not fully
-+ * used by the driver.
-+ */
-+ pm_runtime_get_sync(chip->dev);
- dw_dma_disable(chip);
-+ pm_runtime_put_sync_suspend(chip->dev);
-+
- clk_disable_unprepare(chip->clk);
- }
-
-@@ -252,17 +265,8 @@ MODULE_DEVICE_TABLE(of, dw_dma_of_id_tab
- #endif
-
- #ifdef CONFIG_ACPI
--static struct dw_dma_platform_data dw_dma_acpi_pdata = {
-- .nr_channels = 8,
-- .is_private = true,
-- .chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
-- .chan_priority = CHAN_PRIORITY_ASCENDING,
-- .block_size = 4095,
-- .nr_masters = 2,
--};
--
- static const struct acpi_device_id dw_dma_acpi_id_table[] = {
-- { "INTL9C60", (kernel_ulong_t)&dw_dma_acpi_pdata },
-+ { "INTL9C60", 0 },
- { }
- };
- MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table);
---- a/drivers/dma/dw/regs.h
-+++ b/drivers/dma/dw/regs.h
-@@ -114,10 +114,6 @@ struct dw_dma_regs {
- #define dma_writel_native writel
- #endif
-
--/* To access the registers in early stage of probe */
--#define dma_read_byaddr(addr, name) \
-- dma_readl_native((addr) + offsetof(struct dw_dma_regs, name))
--
- /* Bitfields in DW_PARAMS */
- #define DW_PARAMS_NR_CHAN 8 /* number of channels */
- #define DW_PARAMS_NR_MASTER 11 /* number of AHB masters */
-@@ -143,6 +139,10 @@ enum dw_dma_msize {
- DW_DMA_MSIZE_256,
- };
-
-+/* Bitfields in LLP */
-+#define DWC_LLP_LMS(x) ((x) & 3) /* list master select */
-+#define DWC_LLP_LOC(x) ((x) & ~3) /* next lli */
-+
- /* Bitfields in CTL_LO */
- #define DWC_CTLL_INT_EN (1 << 0) /* irqs enabled? */
- #define DWC_CTLL_DST_WIDTH(n) ((n)<<1) /* bytes per element */
-@@ -150,7 +150,7 @@ enum dw_dma_msize {
- #define DWC_CTLL_DST_INC (0<<7) /* DAR update/not */
- #define DWC_CTLL_DST_DEC (1<<7)
- #define DWC_CTLL_DST_FIX (2<<7)
--#define DWC_CTLL_SRC_INC (0<<7) /* SAR update/not */
-+#define DWC_CTLL_SRC_INC (0<<9) /* SAR update/not */
- #define DWC_CTLL_SRC_DEC (1<<9)
- #define DWC_CTLL_SRC_FIX (2<<9)
- #define DWC_CTLL_DST_MSIZE(n) ((n)<<11) /* burst, #elements */
-@@ -216,6 +216,8 @@ enum dw_dma_msize {
- enum dw_dmac_flags {
- DW_DMA_IS_CYCLIC = 0,
- DW_DMA_IS_SOFT_LLP = 1,
-+ DW_DMA_IS_PAUSED = 2,
-+ DW_DMA_IS_INITIALIZED = 3,
- };
-
- struct dw_dma_chan {
-@@ -224,8 +226,6 @@ struct dw_dma_chan {
- u8 mask;
- u8 priority;
- enum dma_transfer_direction direction;
-- bool paused;
-- bool initialized;
-
- /* software emulation of the LLP transfers */
- struct list_head *tx_node_active;
-@@ -236,8 +236,6 @@ struct dw_dma_chan {
- unsigned long flags;
- struct list_head active_list;
- struct list_head queue;
-- struct list_head free_list;
-- u32 residue;
- struct dw_cyclic_desc *cdesc;
-
- unsigned int descs_allocated;
-@@ -249,8 +247,8 @@ struct dw_dma_chan {
- /* custom slave configuration */
- u8 src_id;
- u8 dst_id;
-- u8 src_master;
-- u8 dst_master;
-+ u8 m_master;
-+ u8 p_master;
-
- /* configuration passed via .device_config */
- struct dma_slave_config dma_sconfig;
-@@ -283,9 +281,8 @@ struct dw_dma {
- u8 all_chan_mask;
- u8 in_use;
-
-- /* hardware configuration */
-- unsigned char nr_masters;
-- unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
-+ /* platform data */
-+ struct dw_dma_platform_data *pdata;
- };
-
- static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
-@@ -308,32 +305,51 @@ static inline struct dw_dma *to_dw_dma(s
- return container_of(ddev, struct dw_dma, dma);
- }
-
-+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-+typedef __be32 __dw32;
-+#else
-+typedef __le32 __dw32;
-+#endif
-+
- /* LLI == Linked List Item; a.k.a. DMA block descriptor */
- struct dw_lli {
- /* values that are not changed by hardware */
-- u32 sar;
-- u32 dar;
-- u32 llp; /* chain to next lli */
-- u32 ctllo;
-+ __dw32 sar;
-+ __dw32 dar;
-+ __dw32 llp; /* chain to next lli */
-+ __dw32 ctllo;
- /* values that may get written back: */
-- u32 ctlhi;
-+ __dw32 ctlhi;
- /* sstat and dstat can snapshot peripheral register state.
- * silicon config may discard either or both...
- */
-- u32 sstat;
-- u32 dstat;
-+ __dw32 sstat;
-+ __dw32 dstat;
- };
-
- struct dw_desc {
- /* FIRST values the hardware uses */
- struct dw_lli lli;
-
-+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-+#define lli_set(d, reg, v) ((d)->lli.reg |= cpu_to_be32(v))
-+#define lli_clear(d, reg, v) ((d)->lli.reg &= ~cpu_to_be32(v))
-+#define lli_read(d, reg) be32_to_cpu((d)->lli.reg)
-+#define lli_write(d, reg, v) ((d)->lli.reg = cpu_to_be32(v))
-+#else
-+#define lli_set(d, reg, v) ((d)->lli.reg |= cpu_to_le32(v))
-+#define lli_clear(d, reg, v) ((d)->lli.reg &= ~cpu_to_le32(v))
-+#define lli_read(d, reg) le32_to_cpu((d)->lli.reg)
-+#define lli_write(d, reg, v) ((d)->lli.reg = cpu_to_le32(v))
-+#endif
-+
- /* THEN values for driver housekeeping */
- struct list_head desc_node;
- struct list_head tx_list;
- struct dma_async_tx_descriptor txd;
- size_t len;
- size_t total_len;
-+ u32 residue;
- };
-
- #define to_dw_desc(h) list_entry(h, struct dw_desc, desc_node)
---- a/include/linux/dma/dw.h
-+++ b/include/linux/dma/dw.h
-@@ -27,6 +27,7 @@ struct dw_dma;
- * @regs: memory mapped I/O space
- * @clk: hclk clock
- * @dw: struct dw_dma that is filed by dw_dma_probe()
-+ * @pdata: pointer to platform data
- */
- struct dw_dma_chip {
- struct device *dev;
-@@ -34,10 +35,12 @@ struct dw_dma_chip {
- void __iomem *regs;
- struct clk *clk;
- struct dw_dma *dw;
-+
-+ const struct dw_dma_platform_data *pdata;
- };
-
- /* Export to the platform drivers */
--int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata);
-+int dw_dma_probe(struct dw_dma_chip *chip);
- int dw_dma_remove(struct dw_dma_chip *chip);
-
- /* DMA API extensions */
---- a/include/linux/platform_data/dma-dw.h
-+++ b/include/linux/platform_data/dma-dw.h
-@@ -21,15 +21,15 @@
- * @dma_dev: required DMA master device
- * @src_id: src request line
- * @dst_id: dst request line
-- * @src_master: src master for transfers on allocated channel.
-- * @dst_master: dest master for transfers on allocated channel.
-+ * @m_master: memory master for transfers on allocated channel
-+ * @p_master: peripheral master for transfers on allocated channel
- */
- struct dw_dma_slave {
- struct device *dma_dev;
- u8 src_id;
- u8 dst_id;
-- u8 src_master;
-- u8 dst_master;
-+ u8 m_master;
-+ u8 p_master;
- };
-
- /**
-@@ -43,7 +43,7 @@ struct dw_dma_slave {
- * @block_size: Maximum block size supported by the controller
- * @nr_masters: Number of AHB masters supported by the controller
- * @data_width: Maximum data width supported by hardware per AHB master
-- * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
-+ * (in bytes, power of 2)
- */
- struct dw_dma_platform_data {
- unsigned int nr_channels;
-@@ -55,7 +55,7 @@ struct dw_dma_platform_data {
- #define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */
- #define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */
- unsigned char chan_priority;
-- unsigned short block_size;
-+ unsigned int block_size;
- unsigned char nr_masters;
- unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
- };
diff --git a/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch b/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch
deleted file mode 100644
index 1a6ce05624..0000000000
--- a/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch
+++ /dev/null
@@ -1,1083 +0,0 @@
-From: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
-Date: Sat, 21 May 2016 22:46:32 +0200
-Subject: [PATCH v2 00/23] ata: sata_dwc_460ex: make it working again
-
-The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: move to generic
-DMA driver") to switch to generic DMA engine API wasn't tested on bare metal.
-Besides that we expecting new board support coming with the same SATA IP but
-with different DMA.
-
-This series is targetting the following things:
-- a few bug fixes to the original driver
-- a part to fix the DMA engine usage and in particularly dw_dmac driver
-- move driver to use generic PHY and "dmas" property which leads to update in DTS
-
-The driver has been tested myself on Sam460ex and WD MyBookLive (apollo3g)
-boards. In any case I ask Christian, Måns, and Julian to independently test and
-provide Tested-by tag or an error report.
-
-Series depends on previously published but not yet fully applied series [1].
-
-The patches are also available via public branch [2].
-
-[1] http://www.spinics.net/lists/dmaengine/msg09250.html
-[2] https://bitbucket.org/andy-shev/linux/branch/topic%2Fdw%2Fsata
-
-Since v1:
-- simplify patch 8 (David Laight)
-- add Tested-by and Acked-by tags
-
-Andy Shevchenko (11):
- ata: sata_dwc_460ex: set dma_boundary to 0x1fff
- ata: sata_dwc_460ex: burst size must be in items not bytes
- ata: sata_dwc_460ex: DMA is always a flow controller
- ata: sata_dwc_460ex: select only core part of DMA driver
- ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
- ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
- ata: sata_dwc_460ex: supply physical address of FIFO to DMA
- ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
- ata: sata_dwc_460ex: use devm_ioremap
- ata: sata_dwc_460ex: make debug messages neat
- powerpc/4xx: Device tree update for the 460ex DWC SATA
-
-Christian Lamparter (1):
- ata: sata_dwc_460ex: fix crash on offline links without an attached
- drive
-
-Mans Rullgard (11):
- ata: sata_dwc_460ex: remove incorrect locking
- ata: sata_dwc_460ex: skip dma setup for non-dma commands
- ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
- ata: sata_dwc_460ex: add phy support
- ata: sata_dwc_460ex: get rid of global data
- ata: sata_dwc_460ex: remove empty libata callback
- ata: sata_dwc_460ex: get rid of some pointless casts
- ata: sata_dwc_460ex: get rid of incorrect cast
- ata: sata_dwc_460ex: add __iomem to register base pointer
- ata: sata_dwc_460ex: use readl/writel_relaxed()
- ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
-
- arch/powerpc/boot/dts/canyonlands.dts | 15 +-
- drivers/ata/Kconfig | 12 +-
- drivers/ata/sata_dwc_460ex.c | 552 +++++++++++++++++-----------------
- 3 files changed, 305 insertions(+), 274 deletions(-)
-
----
- drivers/ata/sata_dwc_460ex.c | 552 ++++++++++++++++++++++---------------------
- 1 file changed, 283 insertions(+), 269 deletions(-)
-
---- a/drivers/ata/sata_dwc_460ex.c
-+++ b/drivers/ata/sata_dwc_460ex.c
-@@ -30,10 +30,12 @@
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/device.h>
-+#include <linux/dmaengine.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
- #include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
- #include <linux/libata.h>
- #include <linux/slab.h>
-
-@@ -42,10 +44,6 @@
- #include <scsi/scsi_host.h>
- #include <scsi/scsi_cmnd.h>
-
--/* Supported DMA engine drivers */
--#include <linux/platform_data/dma-dw.h>
--#include <linux/dma/dw.h>
--
- /* These two are defined in "libata.h" */
- #undef DRV_NAME
- #undef DRV_VERSION
-@@ -53,19 +51,14 @@
- #define DRV_NAME "sata-dwc"
- #define DRV_VERSION "1.3"
-
--#ifndef out_le32
--#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (void __iomem *)(a))
--#endif
--
--#ifndef in_le32
--#define in_le32(a) __le32_to_cpu(__raw_readl((void __iomem *)(a)))
--#endif
-+#define sata_dwc_writel(a, v) writel_relaxed(v, a)
-+#define sata_dwc_readl(a) readl_relaxed(a)
-
- #ifndef NO_IRQ
- #define NO_IRQ 0
- #endif
-
--#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/
-+#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length */
-
- enum {
- SATA_DWC_MAX_PORTS = 1,
-@@ -102,7 +95,7 @@ struct sata_dwc_regs {
- u32 versionr; /* Version Register */
- u32 idr; /* ID Register */
- u32 unimpl[192]; /* Unimplemented */
-- u32 dmadr[256]; /* FIFO Locations in DMA Mode */
-+ u32 dmadr[256]; /* FIFO Locations in DMA Mode */
- };
-
- enum {
-@@ -146,9 +139,14 @@ struct sata_dwc_device {
- struct device *dev; /* generic device struct */
- struct ata_probe_ent *pe; /* ptr to probe-ent */
- struct ata_host *host;
-- u8 __iomem *reg_base;
-- struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
-+ struct sata_dwc_regs __iomem *sata_dwc_regs; /* DW SATA specific */
-+ u32 sactive_issued;
-+ u32 sactive_queued;
-+ struct phy *phy;
-+ phys_addr_t dmadr;
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
- struct dw_dma_chip *dma;
-+#endif
- };
-
- #define SATA_DWC_QCMD_MAX 32
-@@ -159,25 +157,19 @@ struct sata_dwc_device_port {
- int dma_pending[SATA_DWC_QCMD_MAX];
-
- /* DMA info */
-- struct dw_dma_slave *dws;
- struct dma_chan *chan;
- struct dma_async_tx_descriptor *desc[SATA_DWC_QCMD_MAX];
- u32 dma_interrupt_count;
- };
-
- /*
-- * Commonly used DWC SATA driver Macros
-+ * Commonly used DWC SATA driver macros
- */
--#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)\
-- (host)->private_data)
--#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)\
-- (ap)->host->private_data)
--#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)\
-- (ap)->private_data)
--#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)\
-- (qc)->ap->host->private_data)
--#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)\
-- (hsdevp)->hsdev)
-+#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)(host)->private_data)
-+#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)(ap)->host->private_data)
-+#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)(ap)->private_data)
-+#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)(qc)->ap->host->private_data)
-+#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)(p)->hsdev)
-
- enum {
- SATA_DWC_CMD_ISSUED_NOT = 0,
-@@ -190,21 +182,6 @@ enum {
- SATA_DWC_DMA_PENDING_RX = 2,
- };
-
--struct sata_dwc_host_priv {
-- void __iomem *scr_addr_sstatus;
-- u32 sata_dwc_sactive_issued ;
-- u32 sata_dwc_sactive_queued ;
--};
--
--static struct sata_dwc_host_priv host_pvt;
--
--static struct dw_dma_slave sata_dwc_dma_dws = {
-- .src_id = 0,
-- .dst_id = 0,
-- .src_master = 0,
-- .dst_master = 1,
--};
--
- /*
- * Prototypes
- */
-@@ -215,6 +192,93 @@ static void sata_dwc_dma_xfer_complete(s
- static void sata_dwc_port_stop(struct ata_port *ap);
- static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
-
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
-+
-+#include <linux/platform_data/dma-dw.h>
-+#include <linux/dma/dw.h>
-+
-+static struct dw_dma_slave sata_dwc_dma_dws = {
-+ .src_id = 0,
-+ .dst_id = 0,
-+ .m_master = 1,
-+ .p_master = 0,
-+};
-+
-+static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
-+{
-+ struct dw_dma_slave *dws = &sata_dwc_dma_dws;
-+
-+ if (dws->dma_dev != chan->device->dev)
-+ return false;
-+
-+ chan->private = dws;
-+ return true;
-+}
-+
-+static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
-+{
-+ struct sata_dwc_device *hsdev = hsdevp->hsdev;
-+ struct dw_dma_slave *dws = &sata_dwc_dma_dws;
-+ dma_cap_mask_t mask;
-+
-+ dws->dma_dev = hsdev->dev;
-+
-+ dma_cap_zero(mask);
-+ dma_cap_set(DMA_SLAVE, mask);
-+
-+ /* Acquire DMA channel */
-+ hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
-+ if (!hsdevp->chan) {
-+ dev_err(hsdev->dev, "%s: dma channel unavailable\n",
-+ __func__);
-+ return -EAGAIN;
-+ }
-+
-+ return 0;
-+}
-+
-+static int sata_dwc_dma_init_old(struct platform_device *pdev,
-+ struct sata_dwc_device *hsdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *res;
-+
-+ hsdev->dma = devm_kzalloc(&pdev->dev, sizeof(*hsdev->dma), GFP_KERNEL);
-+ if (!hsdev->dma)
-+ return -ENOMEM;
-+
-+ hsdev->dma->dev = &pdev->dev;
-+
-+ /* Get SATA DMA interrupt number */
-+ hsdev->dma->irq = irq_of_parse_and_map(np, 1);
-+ if (hsdev->dma->irq == NO_IRQ) {
-+ dev_err(&pdev->dev, "no SATA DMA irq\n");
-+ return -ENODEV;
-+ }
-+
-+ /* Get physical SATA DMA register base address */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ hsdev->dma->regs = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(hsdev->dma->regs)) {
-+ dev_err(&pdev->dev,
-+ "ioremap failed for AHBDMA register address\n");
-+ return PTR_ERR(hsdev->dma->regs);
-+ }
-+
-+ /* Initialize AHB DMAC */
-+ return dw_dma_probe(hsdev->dma);
-+}
-+
-+static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev)
-+{
-+ if (!hsdev->dma)
-+ return;
-+
-+ dw_dma_remove(hsdev->dma);
-+}
-+
-+#endif
-+
- static const char *get_prot_descript(u8 protocol)
- {
- switch ((enum ata_tf_protocols)protocol) {
-@@ -305,21 +369,20 @@ static struct dma_async_tx_descriptor *d
- struct ata_port *ap = qc->ap;
- struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
- struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
-- dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr;
- struct dma_slave_config sconf;
- struct dma_async_tx_descriptor *desc;
-
- if (qc->dma_dir == DMA_DEV_TO_MEM) {
-- sconf.src_addr = addr;
-- sconf.device_fc = true;
-+ sconf.src_addr = hsdev->dmadr;
-+ sconf.device_fc = false;
- } else { /* DMA_MEM_TO_DEV */
-- sconf.dst_addr = addr;
-+ sconf.dst_addr = hsdev->dmadr;
- sconf.device_fc = false;
- }
-
- sconf.direction = qc->dma_dir;
-- sconf.src_maxburst = AHB_DMA_BRST_DFLT;
-- sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
-+ sconf.src_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
-+ sconf.dst_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
- sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-
-@@ -336,8 +399,8 @@ static struct dma_async_tx_descriptor *d
- desc->callback = dma_dwc_xfer_done;
- desc->callback_param = hsdev;
-
-- dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n",
-- __func__, qc->sg, qc->n_elem, &addr);
-+ dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pa\n", __func__,
-+ qc->sg, qc->n_elem, &hsdev->dmadr);
-
- return desc;
- }
-@@ -350,48 +413,38 @@ static int sata_dwc_scr_read(struct ata_
- return -EINVAL;
- }
-
-- *val = in_le32(link->ap->ioaddr.scr_addr + (scr * 4));
-- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
-- __func__, link->ap->print_id, scr, *val);
-+ *val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
-+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
-+ link->ap->print_id, scr, *val);
-
- return 0;
- }
-
- static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
- {
-- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
-- __func__, link->ap->print_id, scr, val);
-+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
-+ link->ap->print_id, scr, val);
- if (scr > SCR_NOTIFICATION) {
- dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
- __func__, scr);
- return -EINVAL;
- }
-- out_le32(link->ap->ioaddr.scr_addr + (scr * 4), val);
-+ sata_dwc_writel(link->ap->ioaddr.scr_addr + (scr * 4), val);
-
- return 0;
- }
-
--static u32 core_scr_read(unsigned int scr)
--{
-- return in_le32(host_pvt.scr_addr_sstatus + (scr * 4));
--}
--
--static void core_scr_write(unsigned int scr, u32 val)
--{
-- out_le32(host_pvt.scr_addr_sstatus + (scr * 4), val);
--}
--
--static void clear_serror(void)
-+static void clear_serror(struct ata_port *ap)
- {
- u32 val;
-- val = core_scr_read(SCR_ERROR);
-- core_scr_write(SCR_ERROR, val);
-+ sata_dwc_scr_read(&ap->link, SCR_ERROR, &val);
-+ sata_dwc_scr_write(&ap->link, SCR_ERROR, val);
- }
-
- static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
- {
-- out_le32(&hsdev->sata_dwc_regs->intpr,
-- in_le32(&hsdev->sata_dwc_regs->intpr));
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->intpr,
-+ sata_dwc_readl(&hsdev->sata_dwc_regs->intpr));
- }
-
- static u32 qcmd_tag_to_mask(u8 tag)
-@@ -412,7 +465,7 @@ static void sata_dwc_error_intr(struct a
-
- ata_ehi_clear_desc(ehi);
-
-- serror = core_scr_read(SCR_ERROR);
-+ sata_dwc_scr_read(&ap->link, SCR_ERROR, &serror);
- status = ap->ops->sff_check_status(ap);
-
- tag = ap->link.active_tag;
-@@ -423,7 +476,7 @@ static void sata_dwc_error_intr(struct a
- hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
-
- /* Clear error register and interrupt bit */
-- clear_serror();
-+ clear_serror(ap);
- clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
-
- /* This is the only error happening now. TODO check for exact error */
-@@ -462,12 +515,12 @@ static irqreturn_t sata_dwc_isr(int irq,
- int handled, num_processed, port = 0;
- uint intpr, sactive, sactive2, tag_mask;
- struct sata_dwc_device_port *hsdevp;
-- host_pvt.sata_dwc_sactive_issued = 0;
-+ hsdev->sactive_issued = 0;
-
- spin_lock_irqsave(&host->lock, flags);
-
- /* Read the interrupt register */
-- intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
-+ intpr = sata_dwc_readl(&hsdev->sata_dwc_regs->intpr);
-
- ap = host->ports[port];
- hsdevp = HSDEVP_FROM_AP(ap);
-@@ -486,12 +539,12 @@ static irqreturn_t sata_dwc_isr(int irq,
- if (intpr & SATA_DWC_INTPR_NEWFP) {
- clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
-
-- tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
-+ tag = (u8)(sata_dwc_readl(&hsdev->sata_dwc_regs->fptagr));
- dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
- if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
- dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
-
-- host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
-+ hsdev->sactive_issued |= qcmd_tag_to_mask(tag);
-
- qc = ata_qc_from_tag(ap, tag);
- /*
-@@ -505,11 +558,11 @@ static irqreturn_t sata_dwc_isr(int irq,
- handled = 1;
- goto DONE;
- }
-- sactive = core_scr_read(SCR_ACTIVE);
-- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
-+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
-+ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
-
- /* If no sactive issued and tag_mask is zero then this is not NCQ */
-- if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
-+ if (hsdev->sactive_issued == 0 && tag_mask == 0) {
- if (ap->link.active_tag == ATA_TAG_POISON)
- tag = 0;
- else
-@@ -579,22 +632,19 @@ DRVSTILLBUSY:
- */
-
- /* process completed commands */
-- sactive = core_scr_read(SCR_ACTIVE);
-- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
-+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
-+ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
-
-- if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
-- tag_mask > 1) {
-+ if (sactive != 0 || hsdev->sactive_issued > 1 || tag_mask > 1) {
- dev_dbg(ap->dev,
- "%s NCQ:sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
-- __func__, sactive, host_pvt.sata_dwc_sactive_issued,
-- tag_mask);
-+ __func__, sactive, hsdev->sactive_issued, tag_mask);
- }
-
-- if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
-- (host_pvt.sata_dwc_sactive_issued)) {
-+ if ((tag_mask | hsdev->sactive_issued) != hsdev->sactive_issued) {
- dev_warn(ap->dev,
-- "Bad tag mask? sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask=0x%08x\n",
-- sactive, host_pvt.sata_dwc_sactive_issued, tag_mask);
-+ "Bad tag mask? sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
-+ sactive, hsdev->sactive_issued, tag_mask);
- }
-
- /* read just to clear ... not bad if currently still busy */
-@@ -656,7 +706,7 @@ STILLBUSY:
- * we were processing --we read status as part of processing a completed
- * command).
- */
-- sactive2 = core_scr_read(SCR_ACTIVE);
-+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive2);
- if (sactive2 != sactive) {
- dev_dbg(ap->dev,
- "More completed - sactive=0x%x sactive2=0x%x\n",
-@@ -672,15 +722,14 @@ DONE:
- static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
- {
- struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
-+ u32 dmacr = sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr);
-
- if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
-- out_le32(&(hsdev->sata_dwc_regs->dmacr),
-- SATA_DWC_DMACR_RX_CLEAR(
-- in_le32(&(hsdev->sata_dwc_regs->dmacr))));
-+ dmacr = SATA_DWC_DMACR_RX_CLEAR(dmacr);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
- } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
-- out_le32(&(hsdev->sata_dwc_regs->dmacr),
-- SATA_DWC_DMACR_TX_CLEAR(
-- in_le32(&(hsdev->sata_dwc_regs->dmacr))));
-+ dmacr = SATA_DWC_DMACR_TX_CLEAR(dmacr);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
- } else {
- /*
- * This should not happen, it indicates the driver is out of
-@@ -688,10 +737,9 @@ static void sata_dwc_clear_dmacr(struct
- */
- dev_err(hsdev->dev,
- "%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
-- __func__, tag, hsdevp->dma_pending[tag],
-- in_le32(&hsdev->sata_dwc_regs->dmacr));
-- out_le32(&(hsdev->sata_dwc_regs->dmacr),
-- SATA_DWC_DMACR_TXRXCH_CLEAR);
-+ __func__, tag, hsdevp->dma_pending[tag], dmacr);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+ SATA_DWC_DMACR_TXRXCH_CLEAR);
- }
- }
-
-@@ -716,7 +764,7 @@ static void sata_dwc_dma_xfer_complete(s
- __func__, qc->tag, qc->tf.command,
- get_dma_dir_descript(qc->dma_dir),
- get_prot_descript(qc->tf.protocol),
-- in_le32(&(hsdev->sata_dwc_regs->dmacr)));
-+ sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
- }
- #endif
-
-@@ -725,7 +773,7 @@ static void sata_dwc_dma_xfer_complete(s
- dev_err(ap->dev,
- "%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n",
- __func__,
-- in_le32(&(hsdev->sata_dwc_regs->dmacr)));
-+ sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
- }
-
- hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
-@@ -742,8 +790,9 @@ static int sata_dwc_qc_complete(struct a
- u8 status = 0;
- u32 mask = 0x0;
- u8 tag = qc->tag;
-+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
- struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
-- host_pvt.sata_dwc_sactive_queued = 0;
-+ hsdev->sactive_queued = 0;
- dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
-
- if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
-@@ -756,10 +805,8 @@ static int sata_dwc_qc_complete(struct a
-
- /* clear active bit */
- mask = (~(qcmd_tag_to_mask(tag)));
-- host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
-- & mask;
-- host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
-- & mask;
-+ hsdev->sactive_queued = hsdev->sactive_queued & mask;
-+ hsdev->sactive_issued = hsdev->sactive_issued & mask;
- ata_qc_complete(qc);
- return 0;
- }
-@@ -767,54 +814,62 @@ static int sata_dwc_qc_complete(struct a
- static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
- {
- /* Enable selective interrupts by setting the interrupt maskregister*/
-- out_le32(&hsdev->sata_dwc_regs->intmr,
-- SATA_DWC_INTMR_ERRM |
-- SATA_DWC_INTMR_NEWFPM |
-- SATA_DWC_INTMR_PMABRTM |
-- SATA_DWC_INTMR_DMATM);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->intmr,
-+ SATA_DWC_INTMR_ERRM |
-+ SATA_DWC_INTMR_NEWFPM |
-+ SATA_DWC_INTMR_PMABRTM |
-+ SATA_DWC_INTMR_DMATM);
- /*
- * Unmask the error bits that should trigger an error interrupt by
- * setting the error mask register.
- */
-- out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
-
- dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
-- __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
-- in_le32(&hsdev->sata_dwc_regs->errmr));
-+ __func__, sata_dwc_readl(&hsdev->sata_dwc_regs->intmr),
-+ sata_dwc_readl(&hsdev->sata_dwc_regs->errmr));
- }
-
--static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
-+static void sata_dwc_setup_port(struct ata_ioports *port, void __iomem *base)
- {
-- struct sata_dwc_device_port *hsdevp = param;
-- struct dw_dma_slave *dws = hsdevp->dws;
-+ port->cmd_addr = base + 0x00;
-+ port->data_addr = base + 0x00;
-
-- if (dws->dma_dev != chan->device->dev)
-- return false;
-+ port->error_addr = base + 0x04;
-+ port->feature_addr = base + 0x04;
-
-- chan->private = dws;
-- return true;
--}
-+ port->nsect_addr = base + 0x08;
-
--static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
--{
-- port->cmd_addr = (void __iomem *)base + 0x00;
-- port->data_addr = (void __iomem *)base + 0x00;
-+ port->lbal_addr = base + 0x0c;
-+ port->lbam_addr = base + 0x10;
-+ port->lbah_addr = base + 0x14;
-+
-+ port->device_addr = base + 0x18;
-+ port->command_addr = base + 0x1c;
-+ port->status_addr = base + 0x1c;
-
-- port->error_addr = (void __iomem *)base + 0x04;
-- port->feature_addr = (void __iomem *)base + 0x04;
-+ port->altstatus_addr = base + 0x20;
-+ port->ctl_addr = base + 0x20;
-+}
-
-- port->nsect_addr = (void __iomem *)base + 0x08;
-+static int sata_dwc_dma_get_channel(struct sata_dwc_device_port *hsdevp)
-+{
-+ struct sata_dwc_device *hsdev = hsdevp->hsdev;
-+ struct device *dev = hsdev->dev;
-
-- port->lbal_addr = (void __iomem *)base + 0x0c;
-- port->lbam_addr = (void __iomem *)base + 0x10;
-- port->lbah_addr = (void __iomem *)base + 0x14;
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
-+ if (!of_find_property(dev->of_node, "dmas", NULL))
-+ return sata_dwc_dma_get_channel_old(hsdevp);
-+#endif
-
-- port->device_addr = (void __iomem *)base + 0x18;
-- port->command_addr = (void __iomem *)base + 0x1c;
-- port->status_addr = (void __iomem *)base + 0x1c;
-+ hsdevp->chan = dma_request_chan(dev, "sata-dma");
-+ if (IS_ERR(hsdevp->chan)) {
-+ dev_err(dev, "failed to allocate dma channel: %ld\n",
-+ PTR_ERR(hsdevp->chan));
-+ return PTR_ERR(hsdevp->chan);
-+ }
-
-- port->altstatus_addr = (void __iomem *)base + 0x20;
-- port->ctl_addr = (void __iomem *)base + 0x20;
-+ return 0;
- }
-
- /*
-@@ -829,7 +884,6 @@ static int sata_dwc_port_start(struct at
- struct sata_dwc_device *hsdev;
- struct sata_dwc_device_port *hsdevp = NULL;
- struct device *pdev;
-- dma_cap_mask_t mask;
- int i;
-
- hsdev = HSDEV_FROM_AP(ap);
-@@ -853,20 +907,13 @@ static int sata_dwc_port_start(struct at
- }
- hsdevp->hsdev = hsdev;
-
-- hsdevp->dws = &sata_dwc_dma_dws;
-- hsdevp->dws->dma_dev = hsdev->dev;
--
-- dma_cap_zero(mask);
-- dma_cap_set(DMA_SLAVE, mask);
-+ err = sata_dwc_dma_get_channel(hsdevp);
-+ if (err)
-+ goto CLEANUP_ALLOC;
-
-- /* Acquire DMA channel */
-- hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
-- if (!hsdevp->chan) {
-- dev_err(hsdev->dev, "%s: dma channel unavailable\n",
-- __func__);
-- err = -EAGAIN;
-+ err = phy_power_on(hsdev->phy);
-+ if (err)
- goto CLEANUP_ALLOC;
-- }
-
- for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
- hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
-@@ -877,18 +924,18 @@ static int sata_dwc_port_start(struct at
- if (ap->port_no == 0) {
- dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
- __func__);
-- out_le32(&hsdev->sata_dwc_regs->dmacr,
-- SATA_DWC_DMACR_TXRXCH_CLEAR);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+ SATA_DWC_DMACR_TXRXCH_CLEAR);
-
- dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
- __func__);
-- out_le32(&hsdev->sata_dwc_regs->dbtsr,
-- (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
-- SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
-+ (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
-+ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
- }
-
- /* Clear any error bits before libata starts issuing commands */
-- clear_serror();
-+ clear_serror(ap);
- ap->private_data = hsdevp;
- dev_dbg(ap->dev, "%s: done\n", __func__);
- return 0;
-@@ -903,11 +950,13 @@ CLEANUP:
- static void sata_dwc_port_stop(struct ata_port *ap)
- {
- struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
-+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
-
- dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
-
-- dmaengine_terminate_all(hsdevp->chan);
-+ dmaengine_terminate_sync(hsdevp->chan);
- dma_release_channel(hsdevp->chan);
-+ phy_power_off(hsdev->phy);
-
- kfree(hsdevp);
- ap->private_data = NULL;
-@@ -924,22 +973,20 @@ static void sata_dwc_exec_command_by_tag
- struct ata_taskfile *tf,
- u8 tag, u32 cmd_issued)
- {
-- unsigned long flags;
- struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
-
- dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
- ata_get_cmd_descript(tf->command), tag);
-
-- spin_lock_irqsave(&ap->host->lock, flags);
- hsdevp->cmd_issued[tag] = cmd_issued;
-- spin_unlock_irqrestore(&ap->host->lock, flags);
-+
- /*
- * Clear SError before executing a new command.
- * sata_dwc_scr_write and read can not be used here. Clearing the PM
- * managed SError register for the disk needs to be done before the
- * task file is loaded.
- */
-- clear_serror();
-+ clear_serror(ap);
- ata_sff_exec_command(ap, tf);
- }
-
-@@ -992,18 +1039,18 @@ static void sata_dwc_bmdma_start_by_tag(
- sata_dwc_tf_dump(ap, &qc->tf);
-
- if (start_dma) {
-- reg = core_scr_read(SCR_ERROR);
-+ sata_dwc_scr_read(&ap->link, SCR_ERROR, ®);
- if (reg & SATA_DWC_SERROR_ERR_BITS) {
- dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
- __func__, reg);
- }
-
- if (dir == DMA_TO_DEVICE)
-- out_le32(&hsdev->sata_dwc_regs->dmacr,
-- SATA_DWC_DMACR_TXCHEN);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+ SATA_DWC_DMACR_TXCHEN);
- else
-- out_le32(&hsdev->sata_dwc_regs->dmacr,
-- SATA_DWC_DMACR_RXCHEN);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+ SATA_DWC_DMACR_RXCHEN);
-
- /* Enable AHB DMA transfer on the specified channel */
- dmaengine_submit(desc);
-@@ -1025,36 +1072,12 @@ static void sata_dwc_bmdma_start(struct
- sata_dwc_bmdma_start_by_tag(qc, tag);
- }
-
--/*
-- * Function : sata_dwc_qc_prep_by_tag
-- * arguments : ata_queued_cmd *qc, u8 tag
-- * Return value : None
-- * qc_prep for a particular queued command based on tag
-- */
--static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
--{
-- struct dma_async_tx_descriptor *desc;
-- struct ata_port *ap = qc->ap;
-- struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
--
-- dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
-- __func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
-- qc->n_elem);
--
-- desc = dma_dwc_xfer_setup(qc);
-- if (!desc) {
-- dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
-- __func__);
-- return;
-- }
-- hsdevp->desc[tag] = desc;
--}
--
- static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
- {
- u32 sactive;
- u8 tag = qc->tag;
- struct ata_port *ap = qc->ap;
-+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
-
- #ifdef DEBUG_NCQ
- if (qc->tag > 0 || ap->link.sactive > 1)
-@@ -1068,47 +1091,33 @@ static unsigned int sata_dwc_qc_issue(st
-
- if (!ata_is_ncq(qc->tf.protocol))
- tag = 0;
-- sata_dwc_qc_prep_by_tag(qc, tag);
-+
-+ if (ata_is_dma(qc->tf.protocol)) {
-+ hsdevp->desc[tag] = dma_dwc_xfer_setup(qc);
-+ if (!hsdevp->desc[tag])
-+ return AC_ERR_SYSTEM;
-+ } else {
-+ hsdevp->desc[tag] = NULL;
-+ }
-
- if (ata_is_ncq(qc->tf.protocol)) {
-- sactive = core_scr_read(SCR_ACTIVE);
-+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
- sactive |= (0x00000001 << tag);
-- core_scr_write(SCR_ACTIVE, sactive);
-+ sata_dwc_scr_write(&ap->link, SCR_ACTIVE, sactive);
-
- dev_dbg(qc->ap->dev,
- "%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
- __func__, tag, qc->ap->link.sactive, sactive);
-
- ap->ops->sff_tf_load(ap, &qc->tf);
-- sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
-+ sata_dwc_exec_command_by_tag(ap, &qc->tf, tag,
- SATA_DWC_CMD_ISSUED_PEND);
- } else {
-- ata_sff_qc_issue(qc);
-+ return ata_bmdma_qc_issue(qc);
- }
- return 0;
- }
-
--/*
-- * Function : sata_dwc_qc_prep
-- * arguments : ata_queued_cmd *qc
-- * Return value : None
-- * qc_prep for a particular queued command
-- */
--
--static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
--{
-- if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
-- return;
--
--#ifdef DEBUG_NCQ
-- if (qc->tag > 0)
-- dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
-- __func__, qc->tag, qc->ap->link.active_tag);
--
-- return ;
--#endif
--}
--
- static void sata_dwc_error_handler(struct ata_port *ap)
- {
- ata_sff_error_handler(ap);
-@@ -1125,17 +1134,22 @@ static int sata_dwc_hardreset(struct ata
- sata_dwc_enable_interrupts(hsdev);
-
- /* Reconfigure the DMA control register */
-- out_le32(&hsdev->sata_dwc_regs->dmacr,
-- SATA_DWC_DMACR_TXRXCH_CLEAR);
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+ SATA_DWC_DMACR_TXRXCH_CLEAR);
-
- /* Reconfigure the DMA Burst Transaction Size register */
-- out_le32(&hsdev->sata_dwc_regs->dbtsr,
-- SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
-- SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
-+ sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
-+ SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
-+ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
-
- return ret;
- }
-
-+static void sata_dwc_dev_select(struct ata_port *ap, unsigned int device)
-+{
-+ /* SATA DWC is master only */
-+}
-+
- /*
- * scsi mid-layer and libata interface structures
- */
-@@ -1148,7 +1162,13 @@ static struct scsi_host_template sata_dw
- */
- .sg_tablesize = LIBATA_MAX_PRD,
- /* .can_queue = ATA_MAX_QUEUE, */
-- .dma_boundary = ATA_DMA_BOUNDARY,
-+ /*
-+ * Make sure a LLI block is not created that will span 8K max FIS
-+ * boundary. If the block spans such a FIS boundary, there is a chance
-+ * that a DMA burst will cross that boundary -- this results in an
-+ * error in the host controller.
-+ */
-+ .dma_boundary = 0x1fff /* ATA_DMA_BOUNDARY */,
- };
-
- static struct ata_port_operations sata_dwc_ops = {
-@@ -1157,7 +1177,6 @@ static struct ata_port_operations sata_d
- .error_handler = sata_dwc_error_handler,
- .hardreset = sata_dwc_hardreset,
-
-- .qc_prep = sata_dwc_qc_prep,
- .qc_issue = sata_dwc_qc_issue,
-
- .scr_read = sata_dwc_scr_read,
-@@ -1166,6 +1185,8 @@ static struct ata_port_operations sata_d
- .port_start = sata_dwc_port_start,
- .port_stop = sata_dwc_port_stop,
-
-+ .sff_dev_select = sata_dwc_dev_select,
-+
- .bmdma_setup = sata_dwc_bmdma_setup,
- .bmdma_start = sata_dwc_bmdma_start,
- };
-@@ -1184,13 +1205,14 @@ static int sata_dwc_probe(struct platfor
- struct sata_dwc_device *hsdev;
- u32 idr, versionr;
- char *ver = (char *)&versionr;
-- u8 __iomem *base;
-+ void __iomem *base;
- int err = 0;
- int irq;
- struct ata_host *host;
- struct ata_port_info pi = sata_dwc_port_info[0];
- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct device_node *np = ofdev->dev.of_node;
-+ struct resource *res;
-
- /* Allocate DWC SATA device */
- host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
-@@ -1201,57 +1223,33 @@ static int sata_dwc_probe(struct platfor
- host->private_data = hsdev;
-
- /* Ioremap SATA registers */
-- base = of_iomap(np, 0);
-- if (!base) {
-+ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&ofdev->dev, res);
-+ if (IS_ERR(base)) {
- dev_err(&ofdev->dev,
- "ioremap failed for SATA register address\n");
-- return -ENODEV;
-+ return PTR_ERR(base);
- }
-- hsdev->reg_base = base;
- dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
-
- /* Synopsys DWC SATA specific Registers */
-- hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
-+ hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET;
-+ hsdev->dmadr = res->start + SATA_DWC_REG_OFFSET + offsetof(struct sata_dwc_regs, dmadr);
-
- /* Setup port */
- host->ports[0]->ioaddr.cmd_addr = base;
- host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
-- host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
-- sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
-+ sata_dwc_setup_port(&host->ports[0]->ioaddr, base);
-
- /* Read the ID and Version Registers */
-- idr = in_le32(&hsdev->sata_dwc_regs->idr);
-- versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
-+ idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr);
-+ versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr);
- dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
- idr, ver[0], ver[1], ver[2]);
-
-- /* Get SATA DMA interrupt number */
-- hsdev->dma->irq = irq_of_parse_and_map(np, 1);
-- if (hsdev->dma->irq == NO_IRQ) {
-- dev_err(&ofdev->dev, "no SATA DMA irq\n");
-- err = -ENODEV;
-- goto error_iomap;
-- }
--
-- /* Get physical SATA DMA register base address */
-- hsdev->dma->regs = of_iomap(np, 1);
-- if (!hsdev->dma->regs) {
-- dev_err(&ofdev->dev,
-- "ioremap failed for AHBDMA register address\n");
-- err = -ENODEV;
-- goto error_iomap;
-- }
--
- /* Save dev for later use in dev_xxx() routines */
- hsdev->dev = &ofdev->dev;
-
-- hsdev->dma->dev = &ofdev->dev;
--
-- /* Initialize AHB DMAC */
-- err = dw_dma_probe(hsdev->dma, NULL);
-- if (err)
-- goto error_dma_iomap;
--
- /* Enable SATA Interrupts */
- sata_dwc_enable_interrupts(hsdev);
-
-@@ -1263,6 +1261,25 @@ static int sata_dwc_probe(struct platfor
- goto error_out;
- }
-
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
-+ if (!of_find_property(np, "dmas", NULL)) {
-+ err = sata_dwc_dma_init_old(ofdev, hsdev);
-+ if (err)
-+ goto error_out;
-+ }
-+#endif
-+
-+ hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
-+ if (IS_ERR(hsdev->phy)) {
-+ err = PTR_ERR(hsdev->phy);
-+ hsdev->phy = NULL;
-+ goto error_out;
-+ }
-+
-+ err = phy_init(hsdev->phy);
-+ if (err)
-+ goto error_out;
-+
- /*
- * Now, register with libATA core, this will also initiate the
- * device discovery process, invoking our port_start() handler &
-@@ -1276,12 +1293,7 @@ static int sata_dwc_probe(struct platfor
- return 0;
-
- error_out:
-- /* Free SATA DMA resources */
-- dw_dma_remove(hsdev->dma);
--error_dma_iomap:
-- iounmap(hsdev->dma->regs);
--error_iomap:
-- iounmap(base);
-+ phy_exit(hsdev->phy);
- return err;
- }
-
-@@ -1293,11 +1305,13 @@ static int sata_dwc_remove(struct platfo
-
- ata_host_detach(host);
-
-+ phy_exit(hsdev->phy);
-+
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
- /* Free SATA DMA resources */
-- dw_dma_remove(hsdev->dma);
-+ sata_dwc_dma_exit_old(hsdev);
-+#endif
-
-- iounmap(hsdev->dma->regs);
-- iounmap(hsdev->reg_base);
- dev_dbg(&ofdev->dev, "done\n");
- return 0;
- }
diff --git a/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch b/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch
deleted file mode 100644
index 4e0be8d5ad..0000000000
--- a/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-From eb25cb9956cc9384b7fa0d75dec908c9fac8c444 Mon Sep 17 00:00:00 2001
-From: Stephan Linz <linz at li-pro.net>
-Date: Fri, 10 Jun 2016 07:59:56 +0200
-Subject: [PATCH] leds: convert IDE trigger to common disk trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch converts the IDE specific LED trigger to a generic disk
-activity LED trigger. The libata core is now a trigger source just
-like before the IDE disk driver. It's merely a replacement of the
-string ide by disk.
-
-The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is
-widely used by any ibook/powerbook owners with great satisfaction.
-Likewise, it is very often used successfully on different ARM platforms.
-
-Unlike the original patch, the existing 'ide-disk' trigger is still
-available for backward compatibility. That reduce the amount of patches
-in affected device trees out of the mainline kernel. For further
-development, the new name 'disk-activity' should be used.
-
-Cc: Joseph Jezak <josejx at gentoo.org>
-Cc: Jörg Sommer <joerg at alea.gnuu.de>
-Cc: Richard Purdie <rpurdie at rpsys.net>
-Signed-off-by: Stephan Linz <linz at li-pro.net>
-Signed-off-by: Jacek Anaszewski <j.anaszewski at samsung.com>
----
- drivers/ata/libata-core.c | 4 ++++
- drivers/ide/ide-disk.c | 2 +-
- drivers/leds/trigger/Kconfig | 8 +++----
- drivers/leds/trigger/Makefile | 2 +-
- drivers/leds/trigger/ledtrig-disk.c | 41 +++++++++++++++++++++++++++++++++
- drivers/leds/trigger/ledtrig-ide-disk.c | 36 -----------------------------
- include/linux/leds.h | 6 ++---
- 8 files changed, 55 insertions(+), 46 deletions(-)
- create mode 100644 drivers/leds/trigger/ledtrig-disk.c
- delete mode 100644 drivers/leds/trigger/ledtrig-ide-disk.c
-
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -67,6 +67,7 @@
- #include <asm/byteorder.h>
- #include <linux/cdrom.h>
- #include <linux/ratelimit.h>
-+#include <linux/leds.h>
- #include <linux/pm_runtime.h>
- #include <linux/platform_device.h>
-
-@@ -4914,6 +4915,9 @@ void ata_qc_complete(struct ata_queued_c
- {
- struct ata_port *ap = qc->ap;
-
-+ /* Trigger the LED (if available) */
-+ ledtrig_disk_activity();
-+
- /* XXX: New EH and old EH use different mechanisms to
- * synchronize EH with regular execution path.
- *
---- a/drivers/ide/ide-disk.c
-+++ b/drivers/ide/ide-disk.c
-@@ -186,7 +186,7 @@ static ide_startstop_t ide_do_rw_disk(id
- BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
- BUG_ON(rq->cmd_type != REQ_TYPE_FS);
-
-- ledtrig_ide_activity();
-+ ledtrig_disk_activity();
-
- pr_debug("%s: %sing: block=%llu, sectors=%u\n",
- drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
---- a/drivers/leds/trigger/Kconfig
-+++ b/drivers/leds/trigger/Kconfig
-@@ -33,12 +33,12 @@ config LEDS_TRIGGER_ONESHOT
-
- If unsure, say Y.
-
--config LEDS_TRIGGER_IDE_DISK
-- bool "LED IDE Disk Trigger"
-- depends on IDE_GD_ATA
-+config LEDS_TRIGGER_DISK
-+ bool "LED Disk Trigger"
-+ depends on IDE_GD_ATA || ATA
- depends on LEDS_TRIGGERS
- help
-- This allows LEDs to be controlled by IDE disk activity.
-+ This allows LEDs to be controlled by disk activity.
- If unsure, say Y.
-
- config LEDS_TRIGGER_HEARTBEAT
---- a/drivers/leds/trigger/Makefile
-+++ b/drivers/leds/trigger/Makefile
-@@ -1,6 +1,6 @@
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
- obj-$(CONFIG_LEDS_TRIGGER_ONESHOT) += ledtrig-oneshot.o
--obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
-+obj-$(CONFIG_LEDS_TRIGGER_DISK) += ledtrig-disk.o
- obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
- obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
- obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
---- /dev/null
-+++ b/drivers/leds/trigger/ledtrig-disk.c
-@@ -0,0 +1,41 @@
-+/*
-+ * LED Disk Activity Trigger
-+ *
-+ * Copyright 2006 Openedhand Ltd.
-+ *
-+ * Author: Richard Purdie <rpurdie at openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/leds.h>
-+
-+#define BLINK_DELAY 30
-+
-+DEFINE_LED_TRIGGER(ledtrig_disk);
-+DEFINE_LED_TRIGGER(ledtrig_ide);
-+
-+void ledtrig_disk_activity(void)
-+{
-+ unsigned long blink_delay = BLINK_DELAY;
-+
-+ led_trigger_blink_oneshot(ledtrig_disk,
-+ &blink_delay, &blink_delay, 0);
-+ led_trigger_blink_oneshot(ledtrig_ide,
-+ &blink_delay, &blink_delay, 0);
-+}
-+EXPORT_SYMBOL(ledtrig_disk_activity);
-+
-+static int __init ledtrig_disk_init(void)
-+{
-+ led_trigger_register_simple("disk-activity", &ledtrig_disk);
-+ led_trigger_register_simple("ide-disk", &ledtrig_ide);
-+
-+ return 0;
-+}
-+device_initcall(ledtrig_disk_init);
---- a/drivers/leds/trigger/ledtrig-ide-disk.c
-+++ /dev/null
-@@ -1,47 +0,0 @@
--/*
-- * LED IDE-Disk Activity Trigger
-- *
-- * Copyright 2006 Openedhand Ltd.
-- *
-- * Author: Richard Purdie <rpurdie at openedhand.com>
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- */
--
--#include <linux/module.h>
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/leds.h>
--
--#define BLINK_DELAY 30
--
--DEFINE_LED_TRIGGER(ledtrig_ide);
--static unsigned long ide_blink_delay = BLINK_DELAY;
--
--void ledtrig_ide_activity(void)
--{
-- led_trigger_blink_oneshot(ledtrig_ide,
-- &ide_blink_delay, &ide_blink_delay, 0);
--}
--EXPORT_SYMBOL(ledtrig_ide_activity);
--
--static int __init ledtrig_ide_init(void)
--{
-- led_trigger_register_simple("ide-disk", &ledtrig_ide);
-- return 0;
--}
--
--static void __exit ledtrig_ide_exit(void)
--{
-- led_trigger_unregister_simple(ledtrig_ide);
--}
--
--module_init(ledtrig_ide_init);
--module_exit(ledtrig_ide_exit);
--
--MODULE_AUTHOR("Richard Purdie <rpurdie at openedhand.com>");
--MODULE_DESCRIPTION("LED IDE Disk Activity Trigger");
--MODULE_LICENSE("GPL");
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -302,10 +302,10 @@ static inline void *led_get_trigger_data
- #endif /* CONFIG_LEDS_TRIGGERS */
-
- /* Trigger specific functions */
--#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
--extern void ledtrig_ide_activity(void);
-+#ifdef CONFIG_LEDS_TRIGGER_DISK
-+extern void ledtrig_disk_activity(void);
- #else
--static inline void ledtrig_ide_activity(void) {}
-+static inline void ledtrig_disk_activity(void) {}
- #endif
-
- #if defined(CONFIG_LEDS_TRIGGER_CAMERA) || defined(CONFIG_LEDS_TRIGGER_CAMERA_MODULE)
diff --git a/target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch b/target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch
deleted file mode 100644
index 018bcf21a0..0000000000
--- a/target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -40,6 +40,19 @@ config EBONY
- help
- This option enables support for the IBM PPC440GP evaluation board.
-
-+config IKAREM
-+ bool "Ikarem"
-+ depends on 44x
-+ default n
-+ select PPC44x_SIMPLE
-+ select APM821xx
-+ select PCI_MSI
-+ select PPC4xx_MSI
-+ select PPC4xx_PCI_EXPRESS
-+ select IBM_EMAC_RGMII
-+ help
-+ This option enables support for the Cisco Meraki MR24 (Ikarem) Access Point.
-+
- config SAM440EP
- bool "Sam440ep"
- depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -62,6 +62,7 @@ static char *board[] __initdata = {
- "amcc,sequoia",
- "amcc,taishan",
- "amcc,yosemite",
-+ "meraki,ikarem",
- "mosaixtech,icon"
- };
-
diff --git a/target/linux/apm821xx/patches-4.4/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-4.4/201-add-amcc-apollo3g-support.patch
deleted file mode 100644
index 0581a43e33..0000000000
--- a/target/linux/apm821xx/patches-4.4/201-add-amcc-apollo3g-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -143,6 +143,17 @@ config CANYONLANDS
- help
- This option enables support for the AMCC PPC460EX evaluation board.
-
-+config APOLLO3G
-+ bool "Apollo3G"
-+ depends on 44x
-+ default n
-+ select PPC44x_SIMPLE
-+ select APM821xx
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the AMCC Apollo 3G board.
-+
- config GLACIER
- bool "Glacier"
- depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
- * board.c file for it rather than adding it to this list.
- */
- static char *board[] __initdata = {
-+ "amcc,apollo3g",
- "amcc,arches",
- "amcc,bamboo",
- "apm,bluestone",
diff --git a/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch
deleted file mode 100644
index 6b6db1dddb..0000000000
--- a/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Makefile
-+++ b/arch/powerpc/platforms/44x/Makefile
-@@ -3,6 +3,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
- obj-$(CONFIG_44x) += idle.o
- endif
- obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
-+obj-$(CONFIG_WNDR4700) += wndr4700.o
- obj-$(CONFIG_EBONY) += ebony.o
- obj-$(CONFIG_SAM440EP) += sam440ep.o
- obj-$(CONFIG_WARP) += warp.o
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -260,6 +260,19 @@ config ICON
- help
- This option enables support for the AMCC PPC440SPe evaluation board.
-
-+config WNDR4700
-+ bool "WNDR4700"
-+ depends on 44x
-+ default n
-+ select APM821xx
-+ select PCI_MSI
-+ select PPC4xx_MSI
-+ select PPC4xx_PCI_EXPRESS
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the Netgear WNDR4700/WNDR4720 board.
-+
- config XILINX_VIRTEX440_GENERIC_BOARD
- bool "Generic Xilinx Virtex 5 FXT board support"
- depends on 44x
diff --git a/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch b/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch
deleted file mode 100644
index 8c072387d4..0000000000
--- a/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -30,6 +30,19 @@ config BLUESTONE
- help
- This option enables support for the APM APM821xx Evaluation board.
-
-+config BUCKMINSTER
-+ bool "Buckminster"
-+ depends on 44x
-+ default n
-+ select APM821xx
-+ select PCI_MSI
-+ select PPC4xx_MSI
-+ select PPC4xx_PCI_EXPRESS
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the Cisco Meraki MX60/MX60W (Buckminster) Security Appliance
-+
- config EBONY
- bool "Ebony"
- depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -63,6 +63,7 @@ static char *board[] __initdata = {
- "amcc,sequoia",
- "amcc,taishan",
- "amcc,yosemite",
-+ "meraki,buckminster",
- "meraki,ikarem",
- "mosaixtech,icon"
- };
diff --git a/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch
deleted file mode 100644
index 0b1affcfe7..0000000000
--- a/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/powerpc/sysdev/ppc4xx_pci.c
-+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
-@@ -1066,15 +1066,24 @@ static int __init apm821xx_pciex_init_po
- u32 val;
-
- /*
-- * Do a software reset on PCIe ports.
-- * This code is to fix the issue that pci drivers doesn't re-assign
-- * bus number for PCIE devices after Uboot
-- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-- * PT quad port, SAS LSI 1064E)
-+ * Only reset the PHY when no link is currently established.
-+ * This is for the Atheros PCIe board which has problems to establish
-+ * the link (again) after this PHY reset. All other currently tested
-+ * PCIe boards don't show this problem.
- */
--
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-- mdelay(10);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ /*
-+ * Do a software reset on PCIe ports.
-+ * This code is to fix the issue that pci drivers doesn't re-assign
-+ * bus number for PCIE devices after Uboot
-+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+ * PT quad port, SAS LSI 1064E)
-+ */
-+
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+ mdelay(10);
-+ }
-
- if (port->endpoint)
- val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1091,9 +1100,12 @@ static int __init apm821xx_pciex_init_po
- mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
-
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-- mdelay(50);
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+ mdelay(50);
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ }
-
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch
deleted file mode 100644
index d6a1006177..0000000000
--- a/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/powerpc/sysdev/ppc4xx_pci.c
-+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
-@@ -1913,9 +1913,9 @@ static void __init ppc4xx_configure_pcie
- * if it works
- */
- out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
-
diff --git a/target/linux/apm821xx/patches-4.4/701-powerpc_ibm_apm82181_phyclk_fix.patch b/target/linux/apm821xx/patches-4.4/701-powerpc_ibm_apm82181_phyclk_fix.patch
deleted file mode 100644
index 011e785e99..0000000000
--- a/target/linux/apm821xx/patches-4.4/701-powerpc_ibm_apm82181_phyclk_fix.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/drivers/net/ethernet/ibm/emac/core.c
-+++ b/drivers/net/ethernet/ibm/emac/core.c
-@@ -129,6 +129,7 @@ static inline void emac_report_timeout_e
- {
- if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
- EMAC_FTR_460EX_PHY_CLK_FIX |
-+ EMAC_FTR_APM821XX_PHY_CLK_FIX |
- EMAC_FTR_440EP_PHY_CLK_FIX))
- DBG(dev, "%s" NL, error);
- else if (net_ratelimit())
-@@ -146,6 +147,10 @@ static inline void emac_rx_clk_tx(struct
- if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
- dcri_clrset(SDR0, SDR0_MFR,
- 0, SDR0_MFR_ECS >> dev->cell_index);
-+
-+ if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
-+ dcri_clrset(SDR0, SDR0_ETH_CFG,
-+ 0, 0x00000100 >> dev->cell_index);
- #endif
- }
-
-@@ -155,6 +160,10 @@ static inline void emac_rx_clk_default(s
- if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
- dcri_clrset(SDR0, SDR0_MFR,
- SDR0_MFR_ECS >> dev->cell_index, 0);
-+
-+ if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
-+ dcri_clrset(SDR0, SDR0_ETH_CFG,
-+ 0x00000100 >> dev->cell_index, 0);
- #endif
- }
-
-@@ -2587,7 +2596,7 @@ static int emac_init_config(struct emac_
- if (of_device_is_compatible(np, "ibm,emac-apm821xx")) {
- dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
- EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
-- EMAC_FTR_460EX_PHY_CLK_FIX);
-+ EMAC_FTR_APM821XX_PHY_CLK_FIX);
- }
- } else if (of_device_is_compatible(np, "ibm,emac4")) {
- dev->features |= EMAC_FTR_EMAC4;
---- a/drivers/net/ethernet/ibm/emac/core.h
-+++ b/drivers/net/ethernet/ibm/emac/core.h
-@@ -333,6 +333,8 @@ struct emac_instance {
- */
- #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX 0x00001000
-
-+#define EMAC_FTR_APM821XX_PHY_CLK_FIX 0x000002000
-+
- /* Right now, we don't quite handle the always/possible masks on the
- * most optimal way as we don't have a way to say something like
- * always EMAC4. Patches welcome.
diff --git a/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch b/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch
deleted file mode 100644
index c84e761ed0..0000000000
--- a/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch
+++ /dev/null
@@ -1,328 +0,0 @@
-From 59b394d0d2b2e11687e757820c52d6470d15a9c5 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Mon, 13 Jun 2016 15:42:21 +0200
-Subject: [PATCH] phy device tree support for emac
-
----
- drivers/net/ethernet/ibm/emac/core.c | 261 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/ibm/emac/core.h | 4 +
- 2 files changed, 265 insertions(+)
-
---- a/drivers/net/ethernet/ibm/emac/core.c
-+++ b/drivers/net/ethernet/ibm/emac/core.c
-@@ -42,6 +42,7 @@
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/of_net.h>
-+#include <linux/of_mdio.h>
- #include <linux/slab.h>
-
- #include <asm/processor.h>
-@@ -2392,6 +2393,246 @@ static int emac_read_uint_prop(struct de
- return 0;
- }
-
-+static void emac_adjust_link(struct net_device *ndev)
-+{
-+ struct emac_instance *dev = netdev_priv(ndev);
-+ struct phy_device *phy = dev->phy_dev;
-+
-+ dev->phy.autoneg = phy->autoneg;
-+ dev->phy.speed = phy->speed;
-+ dev->phy.duplex = phy->duplex;
-+ dev->phy.pause = phy->pause;
-+ dev->phy.asym_pause = phy->asym_pause;
-+ dev->phy.advertising = phy->advertising;
-+}
-+
-+static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
-+{
-+ return emac_mdio_read(bus->priv, addr, regnum);
-+}
-+
-+static int emac_mii_bus_write(struct mii_bus *bus, int addr, int regnum, u16 val)
-+{
-+ emac_mdio_write(bus->priv, addr, regnum, val);
-+ return 0;
-+}
-+
-+static int emac_mii_bus_reset(struct mii_bus *bus)
-+{
-+ struct emac_instance *dev = netdev_priv(bus->priv);
-+
-+ emac_mii_reset_phy(&dev->phy);
-+ return 0;
-+}
-+
-+static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+
-+ dev->phy.autoneg = AUTONEG_ENABLE;
-+ dev->phy.speed = SPEED_1000;
-+ dev->phy.duplex = DUPLEX_FULL;
-+ dev->phy.advertising = advertise;
-+ phy->autoneg = AUTONEG_ENABLE;
-+ phy->speed = dev->phy.speed;
-+ phy->duplex = dev->phy.duplex;
-+ phy->advertising = advertise;
-+ return phy_start_aneg(dev->phy_dev);
-+}
-+
-+static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+
-+ dev->phy.autoneg = AUTONEG_DISABLE;
-+ dev->phy.speed = speed;
-+ dev->phy.duplex = fd;
-+ phy->autoneg = AUTONEG_DISABLE;
-+ phy->speed = speed;
-+ phy->duplex = fd;
-+ return phy_start_aneg(dev->phy_dev);
-+}
-+
-+static int emac_mdio_poll_link(struct mii_phy *phy)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+ int res;
-+
-+ res = phy_read_status(dev->phy_dev);
-+ if (res) {
-+ dev_err(&dev->ndev->dev, "link update failed (%d).", res);
-+ return ethtool_op_get_link(ndev);
-+ }
-+
-+ return dev->phy_dev->link;
-+}
-+
-+static int emac_mdio_read_link(struct mii_phy *phy)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+ int res;
-+
-+ res = phy_read_status(dev->phy_dev);
-+ if (res)
-+ return res;
-+
-+ dev->phy.speed = phy->speed;
-+ dev->phy.duplex = phy->duplex;
-+ dev->phy.pause = phy->pause;
-+ dev->phy.asym_pause = phy->asym_pause;
-+ return 0;
-+}
-+
-+static int emac_mdio_init_phy(struct mii_phy *phy)
-+{
-+ struct net_device *ndev = phy->dev;
-+ struct emac_instance *dev = netdev_priv(ndev);
-+
-+ phy_start(dev->phy_dev);
-+ dev->phy.autoneg = phy->autoneg;
-+ dev->phy.speed = phy->speed;
-+ dev->phy.duplex = phy->duplex;
-+ dev->phy.advertising = phy->advertising;
-+ dev->phy.pause = phy->pause;
-+ dev->phy.asym_pause = phy->asym_pause;
-+
-+ return phy_init_hw(dev->phy_dev);
-+}
-+
-+static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
-+ .init = emac_mdio_init_phy,
-+ .setup_aneg = emac_mdio_setup_aneg,
-+ .setup_forced = emac_mdio_setup_forced,
-+ .poll_link = emac_mdio_poll_link,
-+ .read_link = emac_mdio_read_link,
-+};
-+
-+static void emac_dt_phy_mdio_cleanup(struct emac_instance *dev)
-+{
-+ if (dev->mii_bus) {
-+ if (dev->mii_bus->state == MDIOBUS_REGISTERED)
-+ mdiobus_unregister(dev->mii_bus);
-+ mdiobus_free(dev->mii_bus);
-+ dev->mii_bus = NULL;
-+ }
-+ kfree(dev->phy.def);
-+ dev->phy.def = NULL;
-+}
-+
-+static int emac_dt_mdio_probe(struct emac_instance *dev)
-+{
-+ struct device_node *mii_np;
-+ int res;
-+
-+ mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
-+ if (!mii_np) {
-+ dev_err(&dev->ndev->dev, "no mdio definition found.");
-+ return -ENODEV;
-+ }
-+
-+ if (!of_device_is_available(mii_np)) {
-+ res = 1;
-+ goto err_put_node;
-+ }
-+
-+ dev->mii_bus = mdiobus_alloc();
-+ if (!dev->mii_bus) {
-+ res = -ENOMEM;
-+ goto err_cleanup_mdio;
-+ }
-+
-+ dev->mii_bus->priv = dev->ndev;
-+ dev->mii_bus->parent = dev->ndev->dev.parent;
-+ dev->mii_bus->name = "emac_mdio";
-+ dev->mii_bus->read = &emac_mii_bus_read;
-+ dev->mii_bus->write = &emac_mii_bus_write;
-+ dev->mii_bus->reset = &emac_mii_bus_reset;
-+ snprintf(dev->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev->mii_bus->name);
-+
-+ res = of_mdiobus_register(dev->mii_bus, mii_np);
-+ if (res) {
-+ dev_err(&dev->ndev->dev, "cannot register MDIO bus %s (%d)",
-+ dev->mii_bus->name, res);
-+ goto err_cleanup_mdio;
-+ }
-+ of_node_put(mii_np);
-+ return 0;
-+
-+ err_cleanup_mdio:
-+ emac_dt_phy_mdio_cleanup(dev);
-+ err_put_node:
-+ of_node_put(mii_np);
-+ return res;
-+}
-+
-+static int emac_dt_phy_probe(struct emac_instance *dev,
-+ struct device_node *phy_handle)
-+{
-+ u32 phy_flags = 0;
-+ int res;
-+
-+ res = of_property_read_u32(phy_handle, "phy-flags", &phy_flags);
-+ if (res < 0 && res != -EINVAL)
-+ return res;
-+
-+ dev->phy.def = kzalloc(sizeof(*dev->phy.def), GFP_KERNEL);
-+ if (!dev->phy.def)
-+ return -ENOMEM;
-+
-+ dev->phy_dev = of_phy_connect(dev->ndev, phy_handle,
-+ &emac_adjust_link, phy_flags,
-+ PHY_INTERFACE_MODE_RGMII);
-+ if (!dev->phy_dev) {
-+ dev_err(&dev->ndev->dev, "failed to connect to PHY.");
-+ kfree(dev->phy.dev);
-+ dev->phy.dev = NULL;
-+ return -ENODEV;
-+ }
-+
-+ dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
-+ dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
-+ dev->phy.def->name = dev->phy_dev->drv->name;
-+ dev->phy.def->ops = &emac_dt_mdio_phy_ops;
-+ dev->phy.features = dev->phy_dev->supported;
-+ dev->phy.address = dev->phy_dev->addr;
-+ dev->phy.mode = dev->phy_dev->interface;
-+ return 0;
-+}
-+
-+static int emac_probe_dt_phy(struct emac_instance *dev)
-+{
-+ struct device_node *np = dev->ofdev->dev.of_node;
-+ struct device_node *phy_handle;
-+ int res = 0;
-+
-+ phy_handle = of_parse_phandle(np, "phy-handle", 0);
-+
-+ if (phy_handle) {
-+ res = emac_dt_mdio_probe(dev);
-+ if (res)
-+ goto out;
-+
-+ res = emac_dt_phy_probe(dev, phy_handle);
-+ if (res) {
-+ emac_dt_phy_mdio_cleanup(dev);
-+ goto out;
-+ }
-+
-+ return 1;
-+ }
-+
-+ out:
-+ of_node_put(phy_handle);
-+ /* if no phy device was specifie in the device tree, then we fallback
-+ * to the old emac_phy.c probe code for compatibility reasons.
-+ */
-+ return res;
-+}
-+
- static int emac_init_phy(struct emac_instance *dev)
- {
- struct device_node *np = dev->ofdev->dev.of_node;
-@@ -2462,6 +2703,18 @@ static int emac_init_phy(struct emac_ins
-
- emac_configure(dev);
-
-+ if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
-+ int res = emac_probe_dt_phy(dev);
-+
-+ if (res == 1)
-+ goto init_phy;
-+ if (res < 0)
-+ dev_err(&dev->ndev->dev, "failed to attach dt phy (%d).",
-+ res);
-+
-+ /* continue with old code */
-+ }
-+
- if (dev->phy_address != 0xffffffff)
- phy_map = ~(1 << dev->phy_address);
-
-@@ -2489,6 +2742,7 @@ static int emac_init_phy(struct emac_ins
- return -ENXIO;
- }
-
-+ init_phy:
- /* Init PHY */
- if (dev->phy.def->ops->init)
- dev->phy.def->ops->init(&dev->phy);
-@@ -2907,6 +3161,8 @@ static int emac_probe(struct platform_de
- /* I have a bad feeling about this ... */
-
- err_detach_tah:
-+ emac_dt_phy_mdio_cleanup(dev);
-+
- if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
- tah_detach(dev->tah_dev, dev->tah_port);
- err_detach_rgmii:
-@@ -2957,6 +3213,11 @@ static int emac_remove(struct platform_d
- if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
- zmii_detach(dev->zmii_dev, dev->zmii_port);
-
-+ if (dev->phy_dev)
-+ phy_disconnect(dev->phy_dev);
-+
-+ emac_dt_phy_mdio_cleanup(dev);
-+
- busy_phy_map &= ~(1 << dev->phy.address);
- DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
-
---- a/drivers/net/ethernet/ibm/emac/core.h
-+++ b/drivers/net/ethernet/ibm/emac/core.h
-@@ -199,6 +199,10 @@ struct emac_instance {
- struct emac_instance *mdio_instance;
- struct mutex mdio_lock;
-
-+ /* Device-tree based phy configuration */
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phy_dev;
-+
- /* ZMII infos if any */
- u32 zmii_ph;
- u32 zmii_port;
diff --git a/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
deleted file mode 100644
index 5d63ddd429..0000000000
--- a/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
+++ /dev/null
@@ -1,545 +0,0 @@
-From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at googlemail.com>
-Date: Thu, 2 Jun 2016 00:48:46 +0200
-Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
- w/o ROM
-
-This patch adds a firmware loader for the uPD720201K8-711-BAC-A
-and uPD720202K8-711-BAA-A variant. Both of these chips are listed
-in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
-devices which need the firmware loader on page 2 in order to
-work as they "do not support the External ROM".
-
-The "Firmware Download Sequence" is describe in chapter
-"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
-
-The firmware "K2013080.mem" is available from a USB3.0 Host to
-PCIe Adapter (PP2U-E card) "Firmware download" archive. An
-alternative version can be sourced from Netgear's WNDR4700 GPL
-archives.
-
-The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
-(2012-06-15) state that the firmware is for the following devices:
- - uPD720201 ES 2.0 sample whose revision ID is 2.
- - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-
-If someone from Renesas is listening: It would be great, if these
-firmwares could be added to linux-firmware.git.
-
-Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
-Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
----
- drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 492 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -24,6 +24,8 @@
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/acpi.h>
-+#include <linux/firmware.h>
-+#include <asm/unaligned.h>
-
- #include "xhci.h"
- #include "xhci-trace.h"
-@@ -218,6 +220,458 @@ static void xhci_pme_acpi_rtd3_enable(st
- static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
- #endif /* CONFIG_ACPI */
-
-+static const struct renesas_fw_entry {
-+ const char *firmware_name;
-+ u16 device;
-+ u8 revision;
-+ u16 expected_version;
-+} renesas_fw_table[] = {
-+ /*
-+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
-+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
-+ * need the software loader.
-+ *
-+ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
-+ *
-+ * Note: This firmware is for the following devices.
-+ * - uPD720201 ES 2.0 sample whose revision ID is 2.
-+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
-+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-+ */
-+ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
-+ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
-+ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
-+};
-+
-+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ size_t i;
-+
-+ /* This loader will only work with a RENESAS device. */
-+ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
-+ return NULL;
-+
-+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+ entry = &renesas_fw_table[i];
-+ if (entry->device == dev->device &&
-+ entry->revision == dev->revision)
-+ return entry;
-+ }
-+
-+ return NULL;
-+}
-+
-+static int renesas_fw_download_image(struct pci_dev *dev,
-+ const u32 *fw,
-+ size_t step)
-+{
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+ bool data0_or_data1;
-+
-+ /*
-+ * The hardware does alternate between two 32-bit pages.
-+ * (This is because each row of the firmware is 8 bytes).
-+ *
-+ * for even steps we use DATA0, for odd steps DATA1.
-+ */
-+ data0_or_data1 = (step & 1) == 1;
-+
-+ /* step+1. Read "Set DATAX" and confirm it is cleared. */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(dev, 0xF5, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & BIT(data0_or_data1)))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000)
-+ return -ETIMEDOUT;
-+
-+ /*
-+ * step+2. Write FW data to "DATAX".
-+ * "LSB is left" => force little endian
-+ */
-+ err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
-+ (__force u32) cpu_to_le32(fw[step]));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ udelay(100);
-+
-+ /* step+3. Set "Set DATAX". */
-+ err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ return 0;
-+}
-+
-+static int renesas_fw_verify(struct pci_dev *dev,
-+ const void *fw_data,
-+ size_t length)
-+{
-+ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
-+ u16 fw_version_pointer;
-+ u16 fw_version;
-+
-+ if (!entry)
-+ return -EINVAL;
-+
-+ /*
-+ * The Firmware's Data Format is describe in
-+ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
-+ */
-+
-+ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
-+ if (length % 8 != 0) {
-+ dev_err(&dev->dev, "firmware size is not a multipe of 8.");
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * The bootrom chips of the big brother have sizes up to 64k, let's
-+ * assume that's the biggest the firmware can get.
-+ */
-+ if (length < 0x1000 || length >= 0x10000) {
-+ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
-+ length);
-+ return -EINVAL;
-+ }
-+
-+ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
-+ if (get_unaligned_le16(fw_data) != 0x55aa) {
-+ dev_err(&dev->dev, "no valid firmware header found.");
-+ return -EINVAL;
-+ }
-+
-+ /* verify the firmware version position and print it. */
-+ fw_version_pointer = get_unaligned_le16(fw_data + 4);
-+ if (fw_version_pointer + 2 >= length) {
-+ dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
-+ return -EINVAL;
-+ }
-+
-+ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
-+ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
-+
-+ if (fw_version != entry->expected_version) {
-+ dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
-+ entry->expected_version);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int renesas_fw_check_running(struct pci_dev *pdev)
-+{
-+ int err;
-+ u8 fw_state;
-+
-+ /*
-+ * Test if the device is actually needing the firmware. As most
-+ * BIOSes will initialize the device for us. If the device is
-+ * initialized.
-+ */
-+ err = pci_read_config_byte(pdev, 0xF4, &fw_state);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /*
-+ * Check if "FW Download Lock" is locked. If it is and the FW is
-+ * ready we can simply continue. If the FW is not ready, we have
-+ * to give up.
-+ */
-+ if (fw_state & BIT(1)) {
-+ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
-+
-+ if (fw_state & BIT(4))
-+ return 0;
-+
-+ dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check if "FW Download Enable" is set. If someone (us?) tampered
-+ * with it and it can't be resetted, we have to give up too... and
-+ * ask for a forgiveness and a reboot.
-+ */
-+ if (fw_state & BIT(0)) {
-+ dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
-+ return -EIO;
-+ }
-+
-+ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
-+ switch ((fw_state & 0x70)) {
-+ case 0: /* No result yet */
-+ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
-+
-+ /* tell the caller, that this device needs the firmware. */
-+ return 1;
-+
-+ case BIT(4): /* Success, device should be working. */
-+ dev_dbg(&pdev->dev, "FW is ready.");
-+ return 0;
-+
-+ case BIT(5): /* Error State */
-+ dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
-+ return -ENODEV;
-+
-+ default: /* All other states are marked as "Reserved states" */
-+ dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
-+ (fw_state & 0x70) >> 4);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
-+{
-+#if 0
-+ u32 val;
-+
-+ /*
-+ * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
-+ * 'RUN/STOP' of USBCMD Register is set"
-+ */
-+ val = readl(hcd->regs + 0x20);
-+ if (val & BIT(0)) {
-+ dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
-+ return -EBUSY;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static int renesas_fw_download(struct pci_dev *pdev,
-+ const struct firmware *fw, unsigned int retry_counter)
-+{
-+ const u32 *fw_data = (const u32 *) fw->data;
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+
-+ /*
-+ * For more information and the big picture: please look at the
-+ * "Firmware Download Sequence" in "7.1 FW Download Interface"
-+ * of R19UH0078EJ0500 Rev.5.00 page 131
-+ */
-+ err = renesas_hw_check_run_stop_busy(pdev);
-+ if (err)
-+ return err;
-+
-+ /*
-+ * 0. Set "FW Download Enable" bit in the
-+ * "FW Download Control & Status Register" at 0xF4
-+ */
-+ err = pci_write_config_byte(pdev, 0xF4, BIT(0));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 1 - 10 follow one step after the other. */
-+ for (i = 0; i < fw->size / 4; i++) {
-+ err = renesas_fw_download_image(pdev, fw_data, i);
-+ if (err) {
-+ dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
-+ i, i * 4, err);
-+ return err;
-+ }
-+ }
-+
-+ /*
-+ * This sequence continues until the last data is written to
-+ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
-+ * is cleared by the hardware beforehand.
-+ */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(pdev, 0xF5, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & (BIT(0) | BIT(1))))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000)
-+ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
-+
-+ /*
-+ * 11. After finishing writing the last data of FW, the
-+ * System Software must clear "FW Download Enable"
-+ */
-+ err = pci_write_config_byte(pdev, 0xF4, 0);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 12. Read "Result Code" and confirm it is good. */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(pdev, 0xF4, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (fw_status & BIT(4))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000) {
-+ /* Timed out / Error - let's see if we can fix this */
-+ err = renesas_fw_check_running(pdev);
-+ switch (err) {
-+ case 0: /*
-+ * we shouldn't end up here.
-+ * maybe it took a little bit longer.
-+ * But all should be well?
-+ */
-+ break;
-+
-+ case 1: /* (No result yet? - we can try to retry) */
-+ if (retry_counter < 10) {
-+ retry_counter++;
-+ dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
-+ retry_counter);
-+ return renesas_fw_download(pdev, fw,
-+ retry_counter);
-+ }
-+ return -ETIMEDOUT;
-+
-+ default:
-+ return err;
-+ }
-+ }
-+ /*
-+ * Optional last step: Engage Firmware Lock
-+ *
-+ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
-+ * if (err)
-+ * return pcibios_err_to_errno(err);
-+ */
-+
-+ return 0;
-+}
-+
-+struct renesas_fw_ctx {
-+ struct pci_dev *pdev;
-+ const struct pci_device_id *id;
-+ bool resume;
-+};
-+
-+static int xhci_pci_probe(struct pci_dev *pdev,
-+ const struct pci_device_id *id);
-+
-+static void renesas_fw_callback(const struct firmware *fw,
-+ void *context)
-+{
-+ struct renesas_fw_ctx *ctx = context;
-+ struct pci_dev *pdev = ctx->pdev;
-+ struct device *parent = pdev->dev.parent;
-+ int err = -ENOENT;
-+
-+ if (fw) {
-+ err = renesas_fw_verify(pdev, fw->data, fw->size);
-+ if (!err) {
-+ err = renesas_fw_download(pdev, fw, 0);
-+ release_firmware(fw);
-+ if (!err) {
-+ if (ctx->resume)
-+ return;
-+
-+ err = xhci_pci_probe(pdev, ctx->id);
-+ if (!err) {
-+ /* everything worked */
-+ devm_kfree(&pdev->dev, ctx);
-+ return;
-+ }
-+
-+ /* in case of an error - fall through */
-+ } else {
-+ dev_err(&pdev->dev, "firmware failed to download (%d).",
-+ err);
-+ }
-+ }
-+ } else {
-+ dev_err(&pdev->dev, "firmware failed to load (%d).", err);
-+ }
-+
-+ dev_info(&pdev->dev, "Unloading driver");
-+
-+ if (parent)
-+ device_lock(parent);
-+
-+ device_release_driver(&pdev->dev);
-+
-+ if (parent)
-+ device_unlock(parent);
-+
-+ pci_dev_put(pdev);
-+}
-+
-+static int renesas_fw_alive_check(struct pci_dev *pdev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ int err;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ err = renesas_fw_check_running(pdev);
-+ /* Also go ahead, if the firmware is running */
-+ if (err == 0)
-+ return 0;
-+
-+ /* At this point, we can be sure that the FW isn't ready. */
-+ return err;
-+}
-+
-+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
-+ const struct pci_device_id *id,
-+ bool do_resume)
-+{
-+ const struct renesas_fw_entry *entry;
-+ struct renesas_fw_ctx *ctx;
-+ int err;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ err = renesas_fw_check_running(pdev);
-+ /* Continue ahead, if the firmware is already running. */
-+ if (err == 0)
-+ return 0;
-+
-+ if (err != 1)
-+ return err;
-+
-+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+ ctx->pdev = pdev;
-+ ctx->resume = do_resume;
-+ ctx->id = id;
-+
-+ pci_dev_get(pdev);
-+ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
-+ &pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
-+ if (err) {
-+ pci_dev_put(pdev);
-+ return err;
-+ }
-+
-+ /*
-+ * The renesas_fw_callback() callback will continue the probe
-+ * process, once it aquires the firmware.
-+ */
-+ return 1;
-+}
-+
- /* called during probe() after chip reset completes */
- static int xhci_pci_setup(struct usb_hcd *hcd)
- {
-@@ -257,6 +711,22 @@ static int xhci_pci_probe(struct pci_dev
- struct hc_driver *driver;
- struct usb_hcd *hcd;
-
-+ /*
-+ * Check if this device is a RENESAS uPD720201/2 device.
-+ * Otherwise, we can continue with xhci_pci_probe as usual.
-+ */
-+ retval = renesas_fw_download_to_hw(dev, id, false);
-+ switch (retval) {
-+ case 0:
-+ break;
-+
-+ case 1: /* let it load the firmware and recontinue the probe. */
-+ return 0;
-+
-+ default:
-+ return retval;
-+ };
-+
- driver = (struct hc_driver *)id->driver_data;
-
- /* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -314,6 +784,16 @@ static void xhci_pci_remove(struct pci_d
- {
- struct xhci_hcd *xhci;
-
-+ if (renesas_fw_alive_check(dev)) {
-+ /*
-+ * bail out early, if this was a renesas device w/o FW.
-+ * Else we might hit the NMI watchdog in xhci_handsake
-+ * during xhci_reset as part of the driver's unloading.
-+ * which we forced in the renesas_fw_callback().
-+ */
-+ return;
-+ }
-+
- xhci = hcd_to_xhci(pci_get_drvdata(dev));
- xhci->xhc_state |= XHCI_STATE_REMOVING;
- if (xhci->shared_hcd) {
diff --git a/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch
deleted file mode 100644
index 5395cabac9..0000000000
--- a/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Thu, 23 Jun 2016 20:28:20 +0200
-Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
- uPD720202
-
-The APM82181 does not support MSI-X. When probed, it will
-produce a noisy warning.
-
----
- drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 362 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -185,7 +185,7 @@ static void xhci_pci_quirks(struct devic
- }
- if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
- pdev->device == 0x0015)
-- xhci->quirks |= XHCI_RESET_ON_RESUME;
-+ xhci->quirks |= XHCI_RESET_ON_RESUME | XHCI_FORCE_MSI;
- if (pdev->vendor == PCI_VENDOR_ID_VIA)
- xhci->quirks |= XHCI_RESET_ON_RESUME;
-
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -388,10 +388,14 @@ static int xhci_try_enable_msi(struct us
- free_irq(hcd->irq, hcd);
- hcd->irq = 0;
-
-- ret = xhci_setup_msix(xhci);
-- if (ret)
-- /* fall back to msi*/
-+ if (xhci->quirks & XHCI_FORCE_MSI) {
- ret = xhci_setup_msi(xhci);
-+ } else {
-+ ret = xhci_setup_msix(xhci);
-+ if (ret)
-+ /* fall back to msi*/
-+ ret = xhci_setup_msi(xhci);
-+ }
-
- if (!ret)
- /* hcd->irq is 0, we have MSI */
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1652,6 +1652,7 @@ struct xhci_hcd {
- /* support xHCI 0.96 spec USB2 software LPM */
- unsigned sw_lpm_support:1;
- /* support xHCI 1.0 spec USB2 hardware LPM */
-+#define XHCI_FORCE_MSI (1 << 24)
- unsigned hw_lpm_support:1;
- /* cached usb2 extened protocol capabilites */
- u32 *ext_caps;
diff --git a/target/linux/apm821xx/patches-4.4/803-crypto4xx-make-it-work.patch b/target/linux/apm821xx/patches-4.4/803-crypto4xx-make-it-work.patch
deleted file mode 100644
index 8785f8baab..0000000000
--- a/target/linux/apm821xx/patches-4.4/803-crypto4xx-make-it-work.patch
+++ /dev/null
@@ -1,385 +0,0 @@
-diff --git a/drivers/crypto/amcc/crypto4xx_alg.c b/drivers/crypto/amcc/crypto4xx_alg.c
-index 4afca39..db7258e 100644
---- a/drivers/crypto/amcc/crypto4xx_alg.c
-+++ b/drivers/crypto/amcc/crypto4xx_alg.c
-@@ -27,6 +27,7 @@
- #include <linux/dma-mapping.h>
- #include <crypto/algapi.h>
- #include <crypto/aes.h>
-+#include <crypto/ctr.h>
- #include <crypto/sha.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_sa.h"
-@@ -80,8 +81,8 @@ int crypto4xx_encrypt(struct ablkcipher_request *req)
- ctx->pd_ctl = 0x1;
-
- return crypto4xx_build_pd(&req->base, ctx, req->src, req->dst,
-- req->nbytes, req->info,
-- get_dynamic_sa_iv_size(ctx));
-+ req->nbytes, req->info,
-+ crypto_ablkcipher_ivsize(crypto_ablkcipher_reqtfm(req)));
- }
-
- int crypto4xx_decrypt(struct ablkcipher_request *req)
-@@ -94,8 +95,8 @@ int crypto4xx_decrypt(struct ablkcipher_request *req)
- ctx->pd_ctl = 1;
-
- return crypto4xx_build_pd(&req->base, ctx, req->src, req->dst,
-- req->nbytes, req->info,
-- get_dynamic_sa_iv_size(ctx));
-+ req->nbytes, req->info,
-+ crypto_ablkcipher_ivsize(crypto_ablkcipher_reqtfm(req)));
- }
-
- /**
-@@ -174,6 +175,45 @@ int crypto4xx_setkey_aes_cbc(struct crypto_ablkcipher *cipher,
- CRYPTO_FEEDBACK_MODE_NO_FB);
- }
-
-+int crypto4xx_setkey_aes_ecb(struct crypto_ablkcipher *cipher,
-+ const u8 *key, unsigned int keylen)
-+{
-+ return crypto4xx_setkey_aes(cipher, key, keylen, CRYPTO_MODE_ECB,
-+ CRYPTO_FEEDBACK_MODE_NO_FB);
-+}
-+
-+int crypto4xx_setkey_aes_ctr(struct crypto_ablkcipher *cipher,
-+ const u8 *key, unsigned int keylen)
-+{
-+ return crypto4xx_setkey_aes(cipher, key, keylen, CRYPTO_MODE_AES_CTR,
-+ CRYPTO_FEEDBACK_MODE_NO_FB);
-+}
-+
-+int crypto4xx_setkey_rfc3686_aes_ctr(struct crypto_ablkcipher *cipher,
-+ const u8 *key, unsigned int keylen)
-+{
-+ struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
-+ struct crypto4xx_ctx *ctx = crypto_tfm_ctx(tfm);
-+ int rc;
-+ u32 cnt = 1;
-+
-+ keylen -= CTR_RFC3686_NONCE_SIZE;
-+
-+ rc = crypto4xx_setkey_aes(cipher, key, keylen, CRYPTO_MODE_AES_CTR,
-+ CRYPTO_FEEDBACK_MODE_NO_FB);
-+ if (rc == 0) {
-+ ctx->is_aes_ctr = 1;
-+
-+ crypto4xx_memcpy_le(ctx->state_record, key + keylen,
-+ CTR_RFC3686_NONCE_SIZE);
-+ crypto4xx_memcpy_le(ctx->state_record + CTR_RFC3686_NONCE_SIZE +
-+ CTR_RFC3686_IV_SIZE, (void *)&cnt,
-+ CTR_RFC3686_NONCE_SIZE);
-+ }
-+
-+ return rc;
-+}
-+
- /**
- * HASH SHA1 Functions
- */
-diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c
-index dae1e39..21e020d 100644
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -36,6 +36,7 @@
- #include <asm/dcr-regs.h>
- #include <asm/cacheflush.h>
- #include <crypto/aes.h>
-+#include <crypto/ctr.h>
- #include <crypto/sha.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_core.h"
-@@ -120,9 +121,12 @@ static void crypto4xx_hw_init(struct crypto4xx_device *dev)
- /*clear all pending interrupt*/
- writel(PPC4XX_INTERRUPT_CLR, dev->ce_base + CRYPTO4XX_INT_CLR);
- writel(PPC4XX_INT_DESCR_CNT, dev->ce_base + CRYPTO4XX_INT_DESCR_CNT);
-- writel(PPC4XX_INT_DESCR_CNT, dev->ce_base + CRYPTO4XX_INT_DESCR_CNT);
-- writel(PPC4XX_INT_CFG, dev->ce_base + CRYPTO4XX_INT_CFG);
-- writel(PPC4XX_PD_DONE_INT, dev->ce_base + CRYPTO4XX_INT_EN);
-+
-+ writel(PPC4XX_INT_TIMEOUT_CNT_REVB << 10,
-+ dev->ce_base + CRYPTO4XX_INT_TIMEOUT_CNT);
-+ /* For RevB, 460EX and 460ExR Rev B */
-+ writel(PPC4XX_PD_DONE_INT | PPC4XX_TMO_ERR_INT,
-+ dev->ce_base + CRYPTO4XX_INT_EN);
- }
-
- int crypto4xx_alloc_sa(struct crypto4xx_ctx *ctx, u32 size)
-@@ -159,6 +163,8 @@ void crypto4xx_free_sa(struct crypto4xx_ctx *ctx)
-
- ctx->sa_in_dma_addr = 0;
- ctx->sa_out_dma_addr = 0;
-+ ctx->sa_in = NULL;
-+ ctx->sa_out = NULL;
- ctx->sa_len = 0;
- }
-
-@@ -167,7 +173,7 @@ u32 crypto4xx_alloc_state_record(struct crypto4xx_ctx *ctx)
- ctx->state_record = dma_alloc_coherent(ctx->dev->core_dev->device,
- sizeof(struct sa_state_record),
- &ctx->state_record_dma_addr, GFP_ATOMIC);
-- if (!ctx->state_record_dma_addr)
-+ if (!ctx->state_record_dma_addr || !ctx->state_record)
- return -ENOMEM;
- memset(ctx->state_record, 0, sizeof(struct sa_state_record));
-
-@@ -181,6 +187,7 @@ void crypto4xx_free_state_record(struct crypto4xx_ctx *ctx)
- sizeof(struct sa_state_record),
- ctx->state_record,
- ctx->state_record_dma_addr);
-+ ctx->state_record = NULL;
- ctx->state_record_dma_addr = 0;
- }
-
-@@ -777,7 +784,6 @@ u32 crypto4xx_build_pd(struct crypto_async_request *req,
- unsigned long flags;
- struct pd_uinfo *pd_uinfo = NULL;
- unsigned int nbytes = datalen, idx;
-- unsigned int ivlen = 0;
- u32 gd_idx = 0;
-
- /* figure how many gd is needed */
-@@ -843,8 +849,8 @@ u32 crypto4xx_build_pd(struct crypto_async_request *req,
- pd_uinfo->num_gd = num_gd;
- pd_uinfo->num_sd = num_sd;
-
-+ //writel(0, ctx->dev->ce_base + CRYPTO4XX_SA_UADDR);
- if (iv_len || ctx->is_hash) {
-- ivlen = iv_len;
- pd->sa = pd_uinfo->sa_pa;
- sa = (struct dynamic_sa_ctl *) pd_uinfo->sa_va;
- if (ctx->direction == DIR_INBOUND)
-@@ -855,8 +861,28 @@ u32 crypto4xx_build_pd(struct crypto_async_request *req,
- memcpy((void *) sa + ctx->offset_to_sr_ptr,
- &pd_uinfo->sr_pa, 4);
-
-- if (iv_len)
-- crypto4xx_memcpy_le(pd_uinfo->sr_va, iv, iv_len);
-+ if (iv_len) {
-+ if (ctx->is_aes_ctr) {
-+ /* First the nonce */
-+ memcpy(pd_uinfo->sr_va, ctx->state_record,
-+ CTR_RFC3686_NONCE_SIZE);
-+ /*
-+ * Copy the IV that is passed through
-+ * each operation
-+ */
-+ crypto4xx_memcpy_le(pd_uinfo->sr_va +
-+ CTR_RFC3686_NONCE_SIZE, iv, iv_len);
-+ } else {
-+ crypto4xx_memcpy_le(pd_uinfo->sr_va, iv,
-+ iv_len);
-+ }
-+ }
-+ if (ctx->is_aes_ctr) {
-+ u32 seq = 1;
-+ /* For GCM and CTR(AES) algs adding the counter value */
-+ crypto4xx_memcpy_le(pd_uinfo->sr_va + 12,
-+ (void *)&seq, 4);
-+ }
- } else {
- if (ctx->direction == DIR_INBOUND) {
- pd->sa = ctx->sa_in_dma_addr;
-@@ -964,6 +990,8 @@ u32 crypto4xx_build_pd(struct crypto_async_request *req,
- sa->sa_command_1.bf.hash_crypto_offset = 0;
- pd->pd_ctl.w = ctx->pd_ctl;
- pd->pd_ctl_len.w = 0x00400000 | (ctx->bypass << 24) | datalen;
-+ if (ctx->next_hdr)
-+ pd->pd_ctl.bf.next_hdr = ctx->next_hdr;
- pd_uinfo->state = PD_ENTRY_INUSE;
- wmb();
- /* write any value to push engine to read a pd */
-@@ -1075,7 +1103,8 @@ static void crypto4xx_bh_tasklet_cb(unsigned long data)
- tail = core_dev->dev->pdr_tail;
- pd_uinfo = core_dev->dev->pdr_uinfo +
- sizeof(struct pd_uinfo)*tail;
-- pd = core_dev->dev->pdr + sizeof(struct ce_pd) * tail;
-+ pd = core_dev->dev->pdr + sizeof(struct ce_pd) * tail;
-+
- if ((pd_uinfo->state == PD_ENTRY_INUSE) &&
- pd->pd_ctl.bf.pe_done &&
- !pd->pd_ctl.bf.host_ready) {
-@@ -1097,12 +1126,22 @@ static irqreturn_t crypto4xx_ce_interrupt_handler(int irq, void *data)
- {
- struct device *dev = (struct device *)data;
- struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev);
-+ u32 int_status, dev_status;
-
- if (!core_dev->dev->ce_base)
- return 0;
-
-- writel(PPC4XX_INTERRUPT_CLR,
-- core_dev->dev->ce_base + CRYPTO4XX_INT_CLR);
-+// writel(PPC4XX_INTERRUPT_CLR,
-+// core_dev->dev->ce_base + CRYPTO4XX_INT_CLR);
-+
-+// int_status = readl(core_dev->dev->ce_base + CRYPTO4XX_INT_UNMASK_STAT);
-+// printk("Interrupt status = 0x%08x\n", int_status);
-+
-+// dev_status = readl(core_dev->dev->ce_base + CRYPTO4XX_DEVICE_INFO);
-+// printk("dev status = 0x%08x\n", dev_status);
-+ writel(PPC4XX_INTERRUPT_CLR_REVB,
-+ core_dev->dev->ce_base + CRYPTO4XX_INT_CLR);
-+
- tasklet_schedule(&core_dev->tasklet);
-
- return IRQ_HANDLED;
-@@ -1135,6 +1174,69 @@ struct crypto4xx_alg_common crypto4xx_alg[] = {
- }
- }
- }},
-+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER, .u.cipher = {
-+ .cra_name = "ctr(aes)",
-+ .cra_driver_name = "ctr-aes-ppc4xx",
-+ .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct crypto4xx_ctx),
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_init = crypto4xx_alg_init,
-+ .cra_exit = crypto4xx_alg_exit,
-+ .cra_module = THIS_MODULE,
-+ .cra_u = {
-+ .ablkcipher = {
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ .setkey = crypto4xx_setkey_aes_ctr,
-+ .encrypt = crypto4xx_encrypt,
-+ .decrypt = crypto4xx_decrypt,
-+ },
-+ },
-+ }},
-+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER, .u.cipher = {
-+ .cra_name = "ecb(aes)",
-+ .cra_driver_name = "ecb-aes-ppc4xx",
-+ .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct crypto4xx_ctx),
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_init = crypto4xx_alg_init,
-+ .cra_exit = crypto4xx_alg_exit,
-+ .cra_module = THIS_MODULE,
-+ .cra_u = {
-+ .ablkcipher = {
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ .setkey = crypto4xx_setkey_aes_ecb,
-+ .encrypt = crypto4xx_encrypt,
-+ .decrypt = crypto4xx_decrypt,
-+ },
-+ },
-+ }},
-+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER, .u.cipher = {
-+ .cra_name = "rfc3686(ctr(aes))",
-+ .cra_driver_name = "rfc3686-ctr-aes-ppc4xx",
-+ .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct crypto4xx_ctx),
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_init = crypto4xx_alg_init,
-+ .cra_exit = crypto4xx_alg_exit,
-+ .cra_module = THIS_MODULE,
-+ .cra_u = {
-+ .ablkcipher = {
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ .setkey = crypto4xx_setkey_rfc3686_aes_ctr,
-+ .encrypt = crypto4xx_encrypt,
-+ .decrypt = crypto4xx_decrypt,
-+ },
-+ },
-+ }},
- };
-
- /**
-@@ -1146,6 +1248,8 @@ static int crypto4xx_probe(struct platform_device *ofdev)
- struct resource res;
- struct device *dev = &ofdev->dev;
- struct crypto4xx_core_device *core_dev;
-+ unsigned int pvr;
-+ unsigned short min;
-
- rc = of_address_to_resource(ofdev->dev.of_node, 0, &res);
- if (rc)
-@@ -1206,7 +1310,7 @@ static int crypto4xx_probe(struct platform_device *ofdev)
- /* Register for Crypto isr, Crypto Engine IRQ */
- core_dev->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
- rc = request_irq(core_dev->irq, crypto4xx_ce_interrupt_handler, 0,
-- core_dev->dev->name, dev);
-+ "crypto4xx", dev);
- if (rc)
- goto err_request_irq;
-
-diff --git a/drivers/crypto/amcc/crypto4xx_core.h b/drivers/crypto/amcc/crypto4xx_core.h
-index ecfdcfe..55865da 100644
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -34,8 +34,8 @@
- #define PPC405EX_CE_RESET 0x00000008
-
- #define CRYPTO4XX_CRYPTO_PRIORITY 300
--#define PPC4XX_LAST_PD 63
--#define PPC4XX_NUM_PD 64
-+#define PPC4XX_LAST_PD 511
-+#define PPC4XX_NUM_PD 512
- #define PPC4XX_LAST_GD 1023
- #define PPC4XX_NUM_GD 1024
- #define PPC4XX_LAST_SD 63
-@@ -133,6 +133,7 @@ struct crypto4xx_ctx {
- u32 pd_ctl;
- u32 bypass;
- u32 is_hash;
-+ u32 is_aes_ctr;
- u32 hash_final;
- };
-
-@@ -190,6 +191,12 @@ extern u32 crypto4xx_build_pd(struct crypto_async_request *req,
- void *iv, u32 iv_len);
- extern int crypto4xx_setkey_aes_cbc(struct crypto_ablkcipher *cipher,
- const u8 *key, unsigned int keylen);
-+extern int crypto4xx_setkey_aes_ecb(struct crypto_ablkcipher *cipher,
-+ const u8 *key, unsigned int keylen);
-+extern int crypto4xx_setkey_aes_ctr(struct crypto_ablkcipher *cipher,
-+ const u8 *key, unsigned int keylen);
-+extern int crypto4xx_setkey_rfc3686_aes_ctr(struct crypto_ablkcipher *cipher,
-+ const u8 *key, unsigned int keylen);
- extern int crypto4xx_encrypt(struct ablkcipher_request *req);
- extern int crypto4xx_decrypt(struct ablkcipher_request *req);
- extern int crypto4xx_sha1_alg_init(struct crypto_tfm *tfm);
-diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h
-index 46fe57c..381da9d 100644
---- a/drivers/crypto/amcc/crypto4xx_reg_def.h
-+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
-@@ -121,13 +121,16 @@
- #define PPC4XX_PD_SIZE 6
- #define PPC4XX_CTX_DONE_INT 0x2000
- #define PPC4XX_PD_DONE_INT 0x8000
-+#define PPC4XX_TMO_ERR_INT 0x40000
- #define PPC4XX_BYTE_ORDER 0x22222
- #define PPC4XX_INTERRUPT_CLR 0x3ffff
-+#define PPC4XX_INTERRUPT_CLR_REVB 0x7ffff
- #define PPC4XX_PRNG_CTRL_AUTO_EN 0x3
- #define PPC4XX_DC_3DES_EN 1
- #define PPC4XX_TRNG_EN 0x00020000
--#define PPC4XX_INT_DESCR_CNT 4
-+#define PPC4XX_INT_DESCR_CNT 7
- #define PPC4XX_INT_TIMEOUT_CNT 0
-+#define PPC4XX_INT_TIMEOUT_CNT_REVB 0x3FF
- #define PPC4XX_INT_CFG 1
- /**
- * all follow define are ad hoc
-diff --git a/drivers/crypto/amcc/crypto4xx_sa.h b/drivers/crypto/amcc/crypto4xx_sa.h
-index 1352d58..714c5b4 100644
---- a/drivers/crypto/amcc/crypto4xx_sa.h
-+++ b/drivers/crypto/amcc/crypto4xx_sa.h
-@@ -112,6 +112,7 @@ union sa_command_0 {
-
- #define CRYPTO_MODE_ECB 0
- #define CRYPTO_MODE_CBC 1
-+#define CRYPTO_MODE_AES_CTR 4
-
- #define CRYPTO_FEEDBACK_MODE_NO_FB 0
- #define CRYPTO_FEEDBACK_MODE_64BIT_OFB 0
diff --git a/target/linux/apm821xx/patches-4.4/804-usb-dwc2-add-amcc-usb-otg-405ex.patch b/target/linux/apm821xx/patches-4.4/804-usb-dwc2-add-amcc-usb-otg-405ex.patch
deleted file mode 100644
index fb353be225..0000000000
--- a/target/linux/apm821xx/patches-4.4/804-usb-dwc2-add-amcc-usb-otg-405ex.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -115,6 +115,37 @@ static const struct dwc2_core_params par
- .hibernation = -1,
- };
-
-+static const struct dwc2_core_params params_amcc_dwc_otg = {
-+ .otg_cap = DWC2_CAP_PARAM_HNP_SRP_CAPABLE,
-+ .otg_ver = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .speed = -1,
-+ .enable_dynamic_fifo = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = -1,
-+ .host_nperio_tx_fifo_size = -1,
-+ .host_perio_tx_fifo_size = -1,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .ts_dline = -1,
-+ .reload_ctl = -1,
-+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
-+ GAHBCFG_HBSTLEN_SHIFT,
-+ .uframe_sched = -1,
-+ .external_id_pin_ctl = -1,
-+ .hibernation = -1,
-+};
-+
- static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
- {
- struct platform_device *pdev = to_platform_device(hsotg->dev);
-@@ -307,6 +338,7 @@ static int dwc2_driver_remove(struct pla
- }
-
- static const struct of_device_id dwc2_of_match_table[] = {
-+ { .compatible = "amcc,usb-otg-405ex", .data = ¶ms_amcc_dwc_otg },
- { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
- { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 },
- { .compatible = "snps,dwc2", .data = NULL },
diff --git a/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch b/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch
deleted file mode 100644
index 41f3370008..0000000000
--- a/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch
+++ /dev/null
@@ -1,1027 +0,0 @@
-From 5ea2e152d846bf60901107fefd81a58f792f3bc2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Fri, 10 Jun 2016 03:00:46 +0200
-Subject: [PATCH] hwmon: add driver for Microchip TC654/TC655 PWM fan
- controllers
-
-This patch adds a hwmon driver for the Microchip TC654 and TC655
-Dual SMBus PWM Fan Speed Controllers with Fan Fault detection.
-
-The chip is described in the DS2001734C Spec Document from Microchip.
-It supports:
- - Shared PWM Fan Drive for two fans
- - Provides RPM
- - automatic PWM controller (needs additional
- NTC/PTC Thermistors.)
- - Overtemperature alarm (when using NTC/PTC
- Thermistors)
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
----
- drivers/hwmon/Kconfig | 10 +
- drivers/hwmon/Makefile | 1 +
- drivers/hwmon/tc654.c | 969 +++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 980 insertions(+)
- create mode 100644 drivers/hwmon/tc654.c
-
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -1484,6 +1484,16 @@ config SENSORS_INA2XX
- This driver can also be built as a module. If so, the module
- will be called ina2xx.
-
-+config SENSORS_TC654
-+ tristate "Microchip TC654 and TC655"
-+ depends on I2C
-+ help
-+ If you say yes here you get support for Microchip TC655 and TC654
-+ Dual PWM Fan Speed Controllers and sensor chips.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called tc654.
-+
- config SENSORS_TC74
- tristate "Microchip TC74"
- depends on I2C
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -143,6 +143,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc4
- obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
- obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
- obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
-+obj-$(CONFIG_SENSORS_TC654) += tc654.o
- obj-$(CONFIG_SENSORS_TC74) += tc74.o
- obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
- obj-$(CONFIG_SENSORS_TMP102) += tmp102.o
---- /dev/null
-+++ b/drivers/hwmon/tc654.c
-@@ -0,0 +1,969 @@
-+/*
-+ * tc654.c - Support for Microchip TC654/TC655
-+ * "A Dual SMBus PWM FAN Speed Controllers with Fan Fault Detection"
-+ *
-+ * Copyright (c) 2016 Christian Lamparter <chunkeey at gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation version 2 of the License.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * The chip is described in the DS2001734C Spec Document from Microchip.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/jiffies.h>
-+#include <linux/i2c.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+#include <linux/err.h>
-+#include <linux/mutex.h>
-+#include <linux/thermal.h>
-+
-+/* Hardware definitions */
-+/* 5.1.4 Address Byte stats that TC654/TC655 are fixed at 0x1b */
-+static const unsigned short normal_i2c[] = { 0x1b, I2C_CLIENT_END };
-+
-+enum TC654_REGS {
-+ TC654_REG_RPM1 = 0x00,
-+ TC654_REG_RPM2,
-+ TC654_REG_FAN1_FAULT_THRESH,
-+ TC654_REG_FAN2_FAULT_THRESH,
-+ TC654_REG_CONFIG,
-+ TC654_REG_STATUS,
-+ TC654_REG_DUTY_CYCLE,
-+ TC654_REG_MFR_ID,
-+ TC654_REG_VER_ID,
-+
-+ /* keep last */
-+ __TC654_REG_NUM,
-+};
-+
-+#define TC654_MFR_ID_MICROCHIP 0x84
-+#define TC654_VER_ID 0x00
-+#define TC655_VER_ID 0x01
-+
-+enum TC654_CONTROL_BITS {
-+ TC654_CTRL_SDM = BIT(0),
-+ TC654_CTRL_F1PPR_S = 1,
-+ TC654_CTRL_F1PPR_M = (BIT(1) | BIT(2)),
-+ TC654_CTRL_F2PPR_S = 3,
-+ TC654_CTRL_F2PPR_M = (BIT(3) | BIT(4)),
-+ TC654_CTRL_DUTYC = BIT(5),
-+ TC654_CTRL_RES = BIT(6),
-+ TC654_CTRL_FFCLR = BIT(7),
-+};
-+
-+enum TC654_STATUS_BITS {
-+ TC654_STATUS_F1F = BIT(0),
-+ TC654_STATUS_F2F = BIT(1),
-+ TC654_STATUS_VSTAT = BIT(2),
-+ TC654_STATUS_R1CO = BIT(3),
-+ TC654_STATUS_R2CO = BIT(4),
-+ TC654_STATUS_OTF = BIT(5),
-+};
-+
-+enum TC654_FAN {
-+ TC654_FAN1 = 0,
-+ TC654_FAN2,
-+
-+ /* keep last */
-+ __NUM_TC654_FAN,
-+};
-+
-+enum TC654_FAN_MODE {
-+ TC654_PWM_OFF, /* Shutdown Mode - switch of both fans */
-+ TC654_PWM_VIN, /* Fans will be controlled via V_in analog input pin */
-+ TC654_PWM_3000, /* sets fans to 30% duty cycle */
-+ TC654_PWM_3467,
-+ TC654_PWM_3933, /* default case - if V_in pin is open */
-+ TC654_PWM_4400,
-+ TC654_PWM_4867,
-+ TC654_PWM_5333,
-+ TC654_PWM_5800,
-+ TC654_PWM_6267,
-+ TC654_PWM_6733,
-+ TC654_PWM_7200,
-+ TC654_PWM_7667,
-+ TC654_PWM_8133,
-+ TC654_PWM_8600,
-+ TC654_PWM_9067,
-+ TC654_PWM_9533,
-+ TC654_PWM_10000, /* sets fans to 100% duty cycle */
-+};
-+
-+enum TC654_ALARMS {
-+ TC654_ALARM_FAN1_FAULT,
-+ TC654_ALARM_FAN2_FAULT,
-+ TC654_ALARM_FAN1_COUNTER_OVERFLOW,
-+ TC654_ALARM_FAN2_COUNTER_OVERFLOW,
-+ TC654_ALARM_OVER_TEMPERATURE,
-+
-+ /* KEEP LAST */
-+ __NUM_TC654_ALARMS,
-+};
-+
-+static const struct pwm_table_entry {
-+ u8 min;
-+ enum TC654_FAN_MODE mode;
-+} pwm_table[] = {
-+ { 0, TC654_PWM_OFF },
-+ { 1, TC654_PWM_3000 },
-+ { 88, TC654_PWM_3467 },
-+ {101, TC654_PWM_3933 },
-+ {113, TC654_PWM_4400 },
-+ {125, TC654_PWM_4867 },
-+ {137, TC654_PWM_5333 },
-+ {148, TC654_PWM_5800 },
-+ {160, TC654_PWM_6267 },
-+ {172, TC654_PWM_6733 },
-+ {184, TC654_PWM_7200 },
-+ {196, TC654_PWM_7667 },
-+ {208, TC654_PWM_8133 },
-+ {220, TC654_PWM_8600 },
-+ {232, TC654_PWM_9067 },
-+ {244, TC654_PWM_9533 },
-+ {255, TC654_PWM_10000 },
-+};
-+
-+/* driver context */
-+struct tc654 {
-+ struct i2c_client *client;
-+
-+ struct mutex update_lock;
-+
-+ unsigned long last_updated; /* in jiffies */
-+ u8 cached_regs[__TC654_REG_NUM];
-+
-+ bool valid; /* monitored registers are valid */
-+ u16 fan_input[__NUM_TC654_FAN];
-+ bool alarms[__NUM_TC654_ALARMS];
-+ bool vin_status;
-+ bool pwm_manual;
-+
-+ /* optional cooling device */
-+ struct thermal_cooling_device *cdev;
-+};
-+
-+/* hardware accessors and functions */
-+static int read_tc(struct tc654 *tc, u8 reg)
-+{
-+ s32 status;
-+
-+ if (reg <= TC654_REG_VER_ID) {
-+ /* Table 6.1 states that all registers are readable */
-+ status = i2c_smbus_read_byte_data(tc->client, reg);
-+ } else
-+ status = -EINVAL;
-+
-+ if (status < 0) {
-+ dev_warn(&tc->client->dev, "can't read register 0x%02x due to error (%d)",
-+ reg, status);
-+ } else {
-+ tc->cached_regs[reg] = status;
-+ }
-+
-+ return status;
-+}
-+
-+static int write_tc(struct tc654 *tc, u8 i2c_reg, u8 val)
-+{
-+ s32 status;
-+
-+ /*
-+ * Table 6.1 states that both fan threshold registers,
-+ * the Config and Duty Cycle are writeable.
-+ */
-+ switch (i2c_reg) {
-+ case TC654_REG_FAN1_FAULT_THRESH:
-+ case TC654_REG_FAN2_FAULT_THRESH:
-+ case TC654_REG_DUTY_CYCLE:
-+ case TC654_REG_CONFIG:
-+ status = i2c_smbus_write_byte_data(tc->client, i2c_reg, val);
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (status < 0) {
-+ dev_warn(&tc->client->dev, "can't write register 0x%02x with value 0x%02x due to error (%d)",
-+ i2c_reg, val, status);
-+ } else {
-+ tc->cached_regs[i2c_reg] = val;
-+ }
-+
-+ return status;
-+}
-+
-+static int mod_config(struct tc654 *tc, u8 set, u8 clear)
-+{
-+ u8 val = 0;
-+
-+ /* a bit can't be set and cleared on the same time. */
-+ if (set & clear)
-+ return -EINVAL;
-+
-+ /* invalidate data to force re-read from hardware */
-+ tc->valid = false;
-+ val = (tc->cached_regs[TC654_REG_CONFIG] | set) & (~clear);
-+ return write_tc(tc, TC654_REG_CONFIG, val);
-+}
-+
-+static int read_fan_rpm(struct tc654 *tc, enum TC654_FAN fan)
-+{
-+ int ret;
-+
-+ /* 6.1 RPM-OUTPUT1 and RPM-OUTPUT2 registers */
-+ ret = read_tc(tc, fan == TC654_FAN1 ? TC654_REG_RPM1 : TC654_REG_RPM2);
-+ if (ret < 0)
-+ return ret;
-+
-+ /*
-+ * The Resolution Selection Bit in 6.3 CONFIGURATION REGISTER
-+ * is needed to convert the raw value to the RPM.
-+ * 0 = RPM1 and RPM2 use (8-Bit) resolution => * 50 RPM
-+ * 1 = RPM1 and RPM2 use (9-Bit) resolution => * 25 RPM
-+ */
-+ return ret * (25 <<
-+ !(tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_RES));
-+}
-+
-+static int write_fan_fault_thresh(struct tc654 *tc, enum TC654_FAN fan,
-+ u16 rpm)
-+{
-+ u8 converted_rpm;
-+
-+ if (rpm > 12750)
-+ return -EINVAL;
-+
-+ /*
-+ * 6.2 FAN_FAULT1 and FAN_FAULT2 Threshold registers
-+ *
-+ * Both registers operate in 50 RPM mode exclusively.
-+ */
-+ converted_rpm = rpm / 50;
-+
-+ /* invalidate data to force re-read from hardware */
-+ tc->valid = false;
-+ return write_tc(tc, fan == TC654_FAN1 ? TC654_REG_FAN1_FAULT_THRESH :
-+ TC654_REG_FAN2_FAULT_THRESH, converted_rpm);
-+}
-+
-+
-+static int read_fan_fault_thresh(struct tc654 *tc, enum TC654_FAN fan)
-+{
-+ /*
-+ * 6.2 FAN_FAULT1 and FAN_FAULT2 Threshold registers
-+ *
-+ * Both registers operate in 50 RPM mode exclusively.
-+ */
-+ return read_tc(tc, fan == TC654_FAN1 ? TC654_REG_FAN1_FAULT_THRESH :
-+ TC654_REG_FAN2_FAULT_THRESH) * 50;
-+}
-+
-+static enum TC654_FAN_MODE get_fan_mode(struct tc654 *tc)
-+{
-+ if (tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_SDM) {
-+ return TC654_PWM_OFF;
-+ } else if (tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_DUTYC) {
-+ return TC654_PWM_3000 + tc->cached_regs[TC654_REG_DUTY_CYCLE];
-+ } else if (tc->vin_status == 0)
-+ return TC654_PWM_VIN;
-+
-+ return -EINVAL;
-+}
-+
-+static int write_fan_mode(struct tc654 *tc, enum TC654_FAN_MODE mode)
-+{
-+ int err;
-+ u8 pwm_mode;
-+ bool in_sdm;
-+
-+ in_sdm = !!(tc->cached_regs[TC654_REG_CONFIG] &
-+ TC654_CTRL_SDM);
-+
-+ switch (mode) {
-+ case TC654_PWM_OFF:
-+ if (in_sdm)
-+ return 0;
-+
-+ /* Enter Shutdown Mode - Switches off all fans */
-+ err = mod_config(tc, TC654_CTRL_SDM, TC654_CTRL_DUTYC);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+
-+ case TC654_PWM_VIN:
-+ if (tc->vin_status) {
-+ dev_err(&tc->client->dev,
-+ "V_in pin is open, can't enable automatic mode.");
-+ return -EINVAL;
-+ }
-+
-+ err = mod_config(tc, 0, TC654_CTRL_SDM | TC654_CTRL_DUTYC);
-+ if (err)
-+ return err;
-+
-+ tc->pwm_manual = false;
-+ return 0;
-+
-+ case TC654_PWM_3000:
-+ case TC654_PWM_3467:
-+ case TC654_PWM_3933:
-+ case TC654_PWM_4400:
-+ case TC654_PWM_4867:
-+ case TC654_PWM_5333:
-+ case TC654_PWM_5800:
-+ case TC654_PWM_6267:
-+ case TC654_PWM_6733:
-+ case TC654_PWM_7200:
-+ case TC654_PWM_7667:
-+ case TC654_PWM_8133:
-+ case TC654_PWM_8600:
-+ case TC654_PWM_9067:
-+ case TC654_PWM_9533:
-+ case TC654_PWM_10000:
-+ pwm_mode = mode - TC654_PWM_3000;
-+ if (!in_sdm) {
-+ err = write_tc(tc, TC654_REG_DUTY_CYCLE, pwm_mode);
-+ if (err)
-+ return err;
-+ }
-+
-+ err = mod_config(tc, TC654_CTRL_DUTYC, TC654_CTRL_SDM);
-+ if (err)
-+ return err;
-+
-+ tc->pwm_manual = true;
-+
-+ if (in_sdm) {
-+ /*
-+ * In case the TC654/TC655 was in SDM mode, the write
-+ * above into the TC654_REG_DUTY_CYCLE register will
-+ * have no effect because the chip was switched off.
-+ *
-+ * Note: The TC654/TC655 have a special "power-on"
-+ * feature where the PWM will be forced to 100% for
-+ * one full second in order to spin-up a resting fan.
-+ */
-+ err = write_tc(tc, TC654_REG_DUTY_CYCLE, pwm_mode);
-+ if (err)
-+ return err;
-+ }
-+
-+ return 0;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+static struct tc654 *tc654_update_device(struct device *dev)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+
-+ mutex_lock(&tc->update_lock);
-+
-+ /*
-+ * In Chapter "1.0 Electrical Characteristics",
-+ * the "Fault Output Response Time" is specified as 2.4 seconds.
-+ */
-+ if (time_after(jiffies, tc->last_updated + 2 * HZ + (HZ * 2) / 5)
-+ || !tc->valid) {
-+ size_t i;
-+ int ret;
-+ bool alarm_triggered;
-+
-+ tc->valid = false;
-+
-+ for (i = 0; i < __NUM_TC654_FAN; i++) {
-+ ret = read_fan_rpm(tc, i);
-+ if (ret < 0)
-+ goto out;
-+
-+ tc->fan_input[i] = ret;
-+ }
-+
-+ ret = read_tc(tc, TC654_REG_STATUS);
-+ if (ret < 0)
-+ goto out;
-+
-+ alarm_triggered = !!(ret & (TC654_STATUS_F1F |
-+ TC654_STATUS_F2F | TC654_STATUS_R1CO |
-+ TC654_STATUS_R2CO | TC654_STATUS_OTF));
-+
-+ tc->alarms[TC654_ALARM_FAN1_FAULT] = !!(ret & TC654_STATUS_F1F);
-+ tc->alarms[TC654_ALARM_FAN2_FAULT] = !!(ret & TC654_STATUS_F2F);
-+ tc->alarms[TC654_ALARM_FAN1_COUNTER_OVERFLOW] =
-+ !!(ret & TC654_STATUS_R1CO);
-+ tc->alarms[TC654_ALARM_FAN2_COUNTER_OVERFLOW] =
-+ !!(ret & TC654_STATUS_R2CO);
-+ tc->alarms[TC654_ALARM_OVER_TEMPERATURE] =
-+ !!(ret & TC654_STATUS_OTF);
-+ tc->vin_status = !!(ret & TC654_STATUS_VSTAT);
-+
-+ /*
-+ * From 4.5 and 6.3
-+ *
-+ * ... "If the V_in pin is open when TC654_CTRL_DUTYC is not
-+ * selected, then V_out duty cycle will default to 39.33%.".
-+ *
-+ * and most importantly 6.5:
-+ * ... "V_in pin is open, the duty cycle will go to the default
-+ * setting of this register, which is 0010 (39.33%)."
-+ */
-+ tc->pwm_manual |= tc->vin_status &&
-+ (tc->cached_regs[TC654_REG_CONFIG] &
-+ TC654_CTRL_DUTYC);
-+
-+ if (alarm_triggered) {
-+ /*
-+ * as the name implies, this FLAG needs to be
-+ * set in order to clear the FAN Fault error.
-+ */
-+ ret = mod_config(tc, TC654_CTRL_FFCLR, 0);
-+ if (ret < 0)
-+ goto out;
-+ }
-+
-+ tc->last_updated = jiffies;
-+ tc->valid = true;
-+ }
-+
-+out:
-+ mutex_unlock(&tc->update_lock);
-+ return tc;
-+}
-+
-+static u8 get_fan_pulse(struct tc654 *tc, enum TC654_FAN fan)
-+{
-+ u8 fan_pulse_mask = fan == TC654_FAN1 ?
-+ TC654_CTRL_F1PPR_M : TC654_CTRL_F2PPR_M;
-+ u8 fan_pulse_shift = fan == TC654_FAN1 ?
-+ TC654_CTRL_F1PPR_S : TC654_CTRL_F2PPR_S;
-+
-+ return 1 << ((tc->cached_regs[TC654_REG_CONFIG] & fan_pulse_mask) >>
-+ fan_pulse_shift);
-+}
-+
-+static int
-+set_fan_pulse(struct tc654 *tc, enum TC654_FAN fan, int pulses)
-+{
-+ int old_pulses;
-+ int err;
-+ u8 new_pulse_per_rotation;
-+ u8 fan_pulse_mask = fan == TC654_FAN1 ?
-+ TC654_CTRL_F1PPR_M : TC654_CTRL_F2PPR_M;
-+ u8 fan_pulse_shift = fan == TC654_FAN1 ?
-+ TC654_CTRL_F1PPR_S : TC654_CTRL_F2PPR_S;
-+
-+ switch (pulses) {
-+ case 1:
-+ new_pulse_per_rotation = 0;
-+ break;
-+ case 2:
-+ new_pulse_per_rotation = 1;
-+ break;
-+ case 4:
-+ new_pulse_per_rotation = 2;
-+ break;
-+ case 8:
-+ new_pulse_per_rotation = 3;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ new_pulse_per_rotation <<= fan_pulse_shift;
-+ new_pulse_per_rotation &= fan_pulse_mask;
-+
-+ old_pulses = tc->cached_regs[TC654_REG_CONFIG];
-+ old_pulses &= fan_pulse_mask;
-+
-+ if (new_pulse_per_rotation == old_pulses)
-+ return 0;
-+
-+ mutex_lock(&tc->update_lock);
-+ err = mod_config(tc, new_pulse_per_rotation,
-+ old_pulses & (~new_pulse_per_rotation));
-+ mutex_unlock(&tc->update_lock);
-+
-+ /* invalidate RPM data to force re-read from hardware */
-+ tc->valid = false;
-+
-+ return err;
-+}
-+
-+static int get_fan_speed(struct tc654 *tc)
-+{
-+ enum TC654_FAN_MODE mode;
-+ size_t i;
-+
-+ mode = get_fan_mode(tc);
-+ for (i = 0; i < ARRAY_SIZE(pwm_table); i++) {
-+ if (mode == pwm_table[i].mode)
-+ return pwm_table[i].min;
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static int set_fan_speed(struct tc654 *tc, int new_value)
-+{
-+ int result;
-+ size_t i;
-+
-+ if (new_value > pwm_table[ARRAY_SIZE(pwm_table) - 1].min ||
-+ new_value < pwm_table[0].min)
-+ return -EINVAL;
-+
-+ for (i = 0; i < ARRAY_SIZE(pwm_table); i++) {
-+ /* exact match */
-+ if (pwm_table[i].min == new_value)
-+ break;
-+
-+ /* a little bit too big - go with the previous entry */
-+ if (pwm_table[i].min > new_value) {
-+ --i;
-+ break;
-+ }
-+ }
-+
-+ mutex_lock(&tc->update_lock);
-+ result = write_fan_mode(tc, pwm_table[i].mode);
-+ mutex_unlock(&tc->update_lock);
-+ if (result < 0)
-+ return result;
-+
-+ return 0;
-+}
-+
-+/* sysfs */
-+
-+static ssize_t
-+show_fan_input(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = tc654_update_device(dev);
-+ int nr = to_sensor_dev_attr(da)->index;
-+
-+ return sprintf(buf, "%d\n", tc->fan_input[nr]);
-+}
-+
-+static ssize_t
-+show_fan_min(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+ int nr = to_sensor_dev_attr(da)->index;
-+
-+ return sprintf(buf, "%d\n", read_fan_fault_thresh(tc, nr));
-+}
-+
-+static ssize_t
-+show_fan_min_alarm(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = tc654_update_device(dev);
-+ int nr = to_sensor_dev_attr(da)->index;
-+
-+ return sprintf(buf, "%d\n", nr == TC654_FAN1 ?
-+ tc->alarms[TC654_ALARM_FAN1_FAULT] :
-+ tc->alarms[TC654_ALARM_FAN2_FAULT]);
-+}
-+
-+static ssize_t
-+show_fan_max_alarm(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = tc654_update_device(dev);
-+ int nr = to_sensor_dev_attr(da)->index;
-+
-+ return sprintf(buf, "%d\n", nr == TC654_FAN1 ?
-+ tc->alarms[TC654_ALARM_FAN1_COUNTER_OVERFLOW] :
-+ tc->alarms[TC654_ALARM_FAN2_COUNTER_OVERFLOW]);
-+}
-+
-+static ssize_t
-+set_fan_min(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+ long new_min;
-+ int nr = to_sensor_dev_attr(da)->index;
-+ int old_min = read_fan_fault_thresh(tc, nr);
-+ int status = kstrtol(buf, 10, &new_min);
-+
-+ if (status < 0)
-+ return status;
-+
-+ new_min = (new_min / 50) * 50;
-+ if (new_min == old_min) /* No change */
-+ return count;
-+
-+ if (new_min < 0 || new_min > 12750)
-+ return -EINVAL;
-+
-+ mutex_lock(&tc->update_lock);
-+ status = write_fan_fault_thresh(tc, nr, new_min);
-+ mutex_unlock(&tc->update_lock);
-+ return count;
-+}
-+
-+static ssize_t
-+show_fan_max(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+ int max_rpm = tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_RES ?
-+ (((1 << 9) - 1) * 25) /* ((2**9) - 1) * 25 RPM */:
-+ (((1 << 8) - 1) * 50) /* ((2**8) - 1) * 50 RPM */;
-+
-+ return sprintf(buf, "%d\n", max_rpm);
-+}
-+
-+static ssize_t
-+show_fan_fault(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = tc654_update_device(dev);
-+ int nr = to_sensor_dev_attr(da)->index;
-+ u8 fan_fault_mask = nr == TC654_FAN1 ?
-+ TC654_STATUS_F1F : TC654_STATUS_F2F;
-+
-+ return sprintf(buf, "%d\n",
-+ !!(tc->cached_regs[TC654_REG_STATUS] & fan_fault_mask));
-+}
-+
-+static ssize_t
-+show_fan_pulses(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+ int nr = to_sensor_dev_attr(da)->index;
-+
-+ return sprintf(buf, "%d\n", get_fan_pulse(tc, nr));
-+}
-+
-+static ssize_t
-+set_fan_pulses(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+ long new_pulse;
-+ int nr = to_sensor_dev_attr(da)->index;
-+ int status = kstrtol(buf, 10, &new_pulse);
-+
-+ if (status < 0)
-+ return status;
-+
-+ status = set_fan_pulse(tc, nr, new_pulse);
-+ if (status < 0)
-+ return status;
-+
-+ return count;
-+}
-+
-+static ssize_t
-+show_pwm_enable(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = tc654_update_device(dev);
-+ int pwm_enabled;
-+
-+ if ((tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_SDM) &&
-+ !tc->pwm_manual) {
-+ pwm_enabled = 0; /* full off */
-+ } else {
-+ if (tc->valid && tc->vin_status == 0)
-+ pwm_enabled = 2; /* automatic fan speed control */
-+
-+ pwm_enabled = 1; /* PWM Mode */
-+ }
-+
-+ return sprintf(buf, "%d\n", pwm_enabled);
-+}
-+
-+static ssize_t
-+set_pwm_enable(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+ long new_value;
-+
-+ int result = kstrtol(buf, 10, &new_value);
-+
-+ if (result < 0)
-+ return result;
-+
-+ mutex_lock(&tc->update_lock);
-+ switch (new_value) {
-+ case 0: /* no fan control (i.e. is OFF) */
-+ result = write_fan_mode(tc, TC654_PWM_OFF);
-+ tc->pwm_manual = false;
-+ break;
-+
-+ case 1: /* manual fan control enabled (using pwm) */
-+ result = write_fan_mode(tc, TC654_PWM_10000);
-+ break;
-+
-+ case 2: /* automatic fan speed control enabled */
-+ result = write_fan_mode(tc, TC654_PWM_VIN);
-+ break;
-+
-+ default:
-+ result = -EINVAL;
-+ }
-+
-+ mutex_unlock(&tc->update_lock);
-+ return result < 0 ? result : count;
-+}
-+
-+static ssize_t
-+show_pwm(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = tc654_update_device(dev);
-+ int ret;
-+
-+ ret = get_fan_speed(tc);
-+ if (ret < 0)
-+ return ret;
-+
-+ return sprintf(buf, "%d\n", ret);
-+}
-+
-+static ssize_t
-+set_pwm(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct tc654 *tc = dev_get_drvdata(dev);
-+ long new_value = -1;
-+ int result = kstrtol(buf, 10, &new_value);
-+
-+ if (result < 0)
-+ return result;
-+
-+ if (new_value < 0 || new_value > INT_MAX)
-+ return -EINVAL;
-+
-+ if (!tc->pwm_manual)
-+ return -EINVAL;
-+
-+ result = set_fan_speed(tc, new_value);
-+ if (result < 0)
-+ return result;
-+
-+ return count;
-+}
-+
-+static ssize_t
-+show_temp_alarm_otf(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+ struct tc654 *tc = tc654_update_device(dev);
-+
-+ return sprintf(buf, "%d\n", tc->alarms[TC654_ALARM_OVER_TEMPERATURE]);
-+}
-+
-+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input,
-+ NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, show_fan_min,
-+ set_fan_min, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, show_fan_min_alarm,
-+ NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_max_alarm, S_IRUGO, show_fan_max_alarm,
-+ NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO, show_fan_max, NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault,
-+ NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_pulses, S_IRUGO | S_IWUSR, show_fan_pulses,
-+ set_fan_pulses, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input,
-+ NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR, show_fan_min,
-+ set_fan_min, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_max, S_IRUGO, show_fan_max,
-+ NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_min_alarm, S_IRUGO, show_fan_min_alarm,
-+ NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_max_alarm, S_IRUGO, show_fan_max_alarm,
-+ NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault,
-+ NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_pulses, S_IRUGO | S_IWUSR, show_fan_pulses,
-+ set_fan_pulses, TC654_FAN2);
-+
-+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
-+ set_pwm_enable);
-+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm);
-+
-+static DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_temp_alarm_otf, NULL);
-+
-+/* sensors present on all models */
-+static struct attribute *tc654_attrs[] = {
-+ &sensor_dev_attr_fan1_input.dev_attr.attr,
-+ &sensor_dev_attr_fan1_min.dev_attr.attr,
-+ &sensor_dev_attr_fan1_max.dev_attr.attr,
-+ &sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
-+ &sensor_dev_attr_fan1_max_alarm.dev_attr.attr,
-+ &sensor_dev_attr_fan1_fault.dev_attr.attr,
-+ &sensor_dev_attr_fan1_pulses.dev_attr.attr,
-+ &sensor_dev_attr_fan2_input.dev_attr.attr,
-+ &sensor_dev_attr_fan2_min.dev_attr.attr,
-+ &sensor_dev_attr_fan2_max.dev_attr.attr,
-+ &sensor_dev_attr_fan2_min_alarm.dev_attr.attr,
-+ &sensor_dev_attr_fan2_max_alarm.dev_attr.attr,
-+ &sensor_dev_attr_fan2_fault.dev_attr.attr,
-+ &sensor_dev_attr_fan2_pulses.dev_attr.attr,
-+
-+ &dev_attr_pwm1_enable.attr,
-+ &dev_attr_pwm1.attr,
-+
-+ &dev_attr_temp1_emergency_alarm.attr,
-+ NULL
-+};
-+
-+ATTRIBUTE_GROUPS(tc654);
-+
-+/* cooling device */
-+
-+static int tc654_get_max_state(struct thermal_cooling_device *cdev,
-+ unsigned long *state)
-+{
-+ *state = 255;
-+ return 0;
-+}
-+
-+static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
-+ unsigned long *state)
-+{
-+ struct tc654 *tc = cdev->devdata;
-+ int ret;
-+
-+ if (!tc)
-+ return -EINVAL;
-+
-+ ret = get_fan_speed(tc);
-+ if (ret < 0)
-+ return ret;
-+
-+ *state = ret;
-+ return 0;
-+}
-+
-+static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
-+ unsigned long state)
-+{
-+ struct tc654 *tc = cdev->devdata;
-+
-+ if (!tc)
-+ return -EINVAL;
-+
-+ if (state > INT_MAX)
-+ return -EINVAL;
-+
-+ return set_fan_speed(tc, state);
-+}
-+
-+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
-+ .get_max_state = tc654_get_max_state,
-+ .get_cur_state = tc654_get_cur_state,
-+ .set_cur_state = tc654_set_cur_state,
-+};
-+
-+
-+/* hardware probe and detection */
-+
-+static int
-+tc654_probe(struct i2c_client *client, const struct i2c_device_id *id)
-+{
-+ struct tc654 *tc;
-+ struct device *hwmon_dev;
-+ int ret, i;
-+
-+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+ return -EIO;
-+
-+ tc = devm_kzalloc(&client->dev, sizeof(*tc), GFP_KERNEL);
-+ if (!tc)
-+ return -ENOMEM;
-+
-+ i2c_set_clientdata(client, tc);
-+ tc->client = client;
-+ mutex_init(&tc->update_lock);
-+
-+ /* cache all 8 registers */
-+ for (i = 0; i < __TC654_REG_NUM; i++) {
-+ ret = read_tc(tc, i);
-+ if (ret < 0)
-+ return ret;
-+ }
-+
-+ /* sysfs hooks */
-+ hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
-+ client->name, tc,
-+ tc654_groups);
-+ if (IS_ERR(hwmon_dev))
-+ return PTR_ERR(hwmon_dev);
-+
-+#if IS_ENABLED(CONFIG_OF)
-+ /* Optional cooling device register for Device tree platforms */
-+ tc->cdev = thermal_of_cooling_device_register(client->dev.of_node,
-+ "tc654", tc,
-+ &tc654_fan_cool_ops);
-+#else /* CONFIG_OF */
-+ /* Optional cooling device register for non Device tree platforms */
-+ tc->cdev = thermal_cooling_device_register("tc654", tc,
-+ &tc654_fan_cool_ops);
-+#endif /* CONFIG_OF */
-+
-+ dev_info(&client->dev, "%s: sensor '%s'\n",
-+ dev_name(hwmon_dev), client->name);
-+
-+ return 0;
-+}
-+
-+static const struct i2c_device_id tc654_ids[] = {
-+ { "tc654", 0, },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, tc654_ids);
-+
-+/* Return 0 if detection is successful, -ENODEV otherwise */
-+static int
-+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
-+{
-+ struct i2c_adapter *adapter = new_client->adapter;
-+ int manufacturer, product;
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+ return -ENODEV;
-+
-+ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
-+ if (manufacturer != TC654_MFR_ID_MICROCHIP)
-+ return -ENODEV;
-+
-+ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
-+ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
-+ return -ENODEV;
-+
-+ strlcpy(info->type, "tc654", I2C_NAME_SIZE);
-+ return 0;
-+}
-+
-+static struct i2c_driver tc654_driver = {
-+ .class = I2C_CLASS_HWMON,
-+ .driver = {
-+ .name = "tc654",
-+ },
-+ .probe = tc654_probe,
-+ .id_table = tc654_ids,
-+ .detect = tc654_detect,
-+ .address_list = normal_i2c,
-+};
-+
-+module_i2c_driver(tc654_driver);
-+
-+MODULE_AUTHOR("Christian Lamparter <chunkeey at gmail.com>");
-+MODULE_DESCRIPTION("Microchip TC654/TC655 hwmon driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/apm821xx/patches-4.4/911-hwmon-lm90-split-set-and-show-temp-as-common-codes.patch b/target/linux/apm821xx/patches-4.4/911-hwmon-lm90-split-set-and-show-temp-as-common-codes.patch
deleted file mode 100644
index e450f9045f..0000000000
--- a/target/linux/apm821xx/patches-4.4/911-hwmon-lm90-split-set-and-show-temp-as-common-codes.patch
+++ /dev/null
@@ -1,292 +0,0 @@
-From: Wei Ni <wni at nvidia.com>
-Subject: hwmon: lm90: split set and show temp as common codes
-
-Split set and show temp codes as common functions, so we can use
-it directly when implement linux thermal framework.
-And handle error return value for the lm90_select_remote_channel
-and write_tempx, then set_temp8 and set_temp11 could return it
-to user-space.
-
-Discussed in:
-http://www.spinics.net/lists/linux-tegra/msg14020.html .
-Applied with Jean.
-
-BUG=chrome-os-partner:30834
-TEST=None
-
-Signed-off-by: Wei Ni <wni at nvidia.com>
-Signed-off-by: Jean Delvare <khali at linux-fr.org>
-Reviewed-on: https://chromium-review.googlesource.com/175114
-Tested-by: Wei Ni <wni.nvidia at gmail.com>
-Commit-Queue: Dylan Reid <dgreid at chromium.org>
-Reviewed-by: Dylan Reid <dgreid at chromium.org>
-(cherry picked from commit 614a96decdc7a3784128c9f21c5471367e2c627d)
-Change-Id: Idbe3948812c6737cba94810cd147c29cc527c3cf
-Reviewed-on: https://chromium-review.googlesource.com/212413
-Reviewed-by: Olof Johansson <olofj at chromium.org>
-Commit-Queue: Olof Johansson <olofj at chromium.org>
----
---- a/drivers/hwmon/lm90.c
-+++ b/drivers/hwmon/lm90.c
-@@ -473,20 +473,29 @@ static int lm90_read16(struct i2c_client
- * various registers have different meanings as a result of selecting a
- * non-default remote channel.
- */
--static inline void lm90_select_remote_channel(struct i2c_client *client,
-- struct lm90_data *data,
-- int channel)
-+static inline int lm90_select_remote_channel(struct i2c_client *client,
-+ struct lm90_data *data,
-+ int channel)
- {
- u8 config;
-+ int err;
-
- if (data->kind == max6696) {
- lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
- config &= ~0x08;
- if (channel)
- config |= 0x08;
-- i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
-- config);
-+ err = i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
-+ config);
-+ if (err < 0) {
-+ dev_err(&client->dev,
-+ "Failed to select remote channel %d, err %d\n",
-+ channel, err);
-+ return err;
-+ }
- }
-+
-+ return 0;
- }
-
- /*
-@@ -759,29 +768,34 @@ static u16 temp_to_u16_adt7461(struct lm
- * Sysfs stuff
- */
-
--static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
-- char *buf)
-+static int read_temp8(struct device *dev, int index)
- {
-- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct lm90_data *data = lm90_update_device(dev);
- int temp;
-
- if (data->kind == adt7461 || data->kind == tmp451)
-- temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
-+ temp = temp_from_u8_adt7461(data, data->temp8[index]);
- else if (data->kind == max6646)
-- temp = temp_from_u8(data->temp8[attr->index]);
-+ temp = temp_from_u8(data->temp8[index]);
- else
-- temp = temp_from_s8(data->temp8[attr->index]);
-+ temp = temp_from_s8(data->temp8[index]);
-
- /* +16 degrees offset for temp2 for the LM99 */
-- if (data->kind == lm99 && attr->index == 3)
-+ if (data->kind == lm99 && index == 3)
- temp += 16000;
-
-- return sprintf(buf, "%d\n", temp);
-+ return temp;
- }
-
--static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
-- const char *buf, size_t count)
-+static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
-+ char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+
-+ return sprintf(buf, "%d\n", read_temp8(dev, attr->index));
-+}
-+
-+static int write_temp8(struct device *dev, int index, long val)
- {
- static const u8 reg[TEMP8_REG_NUM] = {
- LM90_REG_W_LOCAL_LOW,
-@@ -794,60 +808,79 @@ static ssize_t set_temp8(struct device *
- MAX6659_REG_W_REMOTE_EMERG,
- };
-
-- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct lm90_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
-- int nr = attr->index;
-- long val;
- int err;
-
-- err = kstrtol(buf, 10, &val);
-- if (err < 0)
-- return err;
--
- /* +16 degrees offset for temp2 for the LM99 */
-- if (data->kind == lm99 && attr->index == 3)
-+ if (data->kind == lm99 && index == 3)
- val -= 16000;
-
- mutex_lock(&data->update_lock);
- if (data->kind == adt7461 || data->kind == tmp451)
-- data->temp8[nr] = temp_to_u8_adt7461(data, val);
-+ data->temp8[index] = temp_to_u8_adt7461(data, val);
- else if (data->kind == max6646)
-- data->temp8[nr] = temp_to_u8(val);
-+ data->temp8[index] = temp_to_u8(val);
- else
-- data->temp8[nr] = temp_to_s8(val);
--
-- lm90_select_remote_channel(client, data, nr >= 6);
-- i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]);
-- lm90_select_remote_channel(client, data, 0);
-+ data->temp8[index] = temp_to_s8(val);
-
-+ if ((err = lm90_select_remote_channel(client, data, index >= 6)) ||
-+ (err = i2c_smbus_write_byte_data(client, reg[index],
-+ data->temp8[index])) ||
-+ (err = lm90_select_remote_channel(client, data, 0)))
-+ dev_err(dev, "write_temp8 failed, err %d\n", err);
- mutex_unlock(&data->update_lock);
-+
-+ return err;
-+}
-+
-+static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
-+ const char *buf, size_t count)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+ int index = attr->index;
-+ long val;
-+ int err;
-+
-+ err = kstrtol(buf, 10, &val);
-+ if (err < 0)
-+ return err;
-+
-+ err = write_temp8(dev, index, val);
-+ if (err < 0)
-+ return err;
-+
- return count;
- }
-
--static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
-- char *buf)
-+static int read_temp11(struct device *dev, int index)
- {
-- struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
- struct lm90_data *data = lm90_update_device(dev);
- int temp;
-
- if (data->kind == adt7461 || data->kind == tmp451)
-- temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
-+ temp = temp_from_u16_adt7461(data, data->temp11[index]);
- else if (data->kind == max6646)
-- temp = temp_from_u16(data->temp11[attr->index]);
-+ temp = temp_from_u16(data->temp11[index]);
- else
-- temp = temp_from_s16(data->temp11[attr->index]);
-+ temp = temp_from_s16(data->temp11[index]);
-
- /* +16 degrees offset for temp2 for the LM99 */
-- if (data->kind == lm99 && attr->index <= 2)
-+ if (data->kind == lm99 && index <= 2)
- temp += 16000;
-
-- return sprintf(buf, "%d\n", temp);
-+ return temp;
- }
-
--static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
-- const char *buf, size_t count)
-+static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
-+ char *buf)
-+{
-+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
-+
-+ return sprintf(buf, "%d\n", read_temp11(dev, attr->index));
-+}
-+
-+static int write_temp11(struct device *dev, int nr, int index, long val)
- {
- struct {
- u8 high;
-@@ -861,18 +894,10 @@ static ssize_t set_temp11(struct device
- { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 }
- };
-
-- struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
- struct lm90_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
-- int nr = attr->nr;
-- int index = attr->index;
-- long val;
- int err;
-
-- err = kstrtol(buf, 10, &val);
-- if (err < 0)
-- return err;
--
- /* +16 degrees offset for temp2 for the LM99 */
- if (data->kind == lm99 && index <= 2)
- val -= 16000;
-@@ -887,15 +912,50 @@ static ssize_t set_temp11(struct device
- else
- data->temp11[index] = temp_to_s8(val) << 8;
-
-- lm90_select_remote_channel(client, data, reg[nr].channel);
-- i2c_smbus_write_byte_data(client, reg[nr].high,
-- data->temp11[index] >> 8);
-- if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
-- i2c_smbus_write_byte_data(client, reg[nr].low,
-- data->temp11[index] & 0xff);
-- lm90_select_remote_channel(client, data, 0);
-+ err = lm90_select_remote_channel(client, data, reg[nr].channel);
-+ if (err)
-+ goto error;
-+
-+ err = i2c_smbus_write_byte_data(client, reg[nr].high,
-+ data->temp11[index] >> 8);
-+ if (err)
-+ goto error;
-+
-+ if (data->flags & LM90_HAVE_REM_LIMIT_EXT) {
-+ err = i2c_smbus_write_byte_data(client, reg[nr].low,
-+ data->temp11[index] & 0xff);
-+ if (err)
-+ goto error;
-+ }
-+
-+ err = lm90_select_remote_channel(client, data, 0);
-+
-+error:
-+ if (err)
-+ dev_err(dev, "write_temp11 failed, err %d\n", err);
-
- mutex_unlock(&data->update_lock);
-+
-+ return err;
-+}
-+
-+static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
-+ const char *buf, size_t count)
-+{
-+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
-+ int nr = attr->nr;
-+ int index = attr->index;
-+ long val;
-+ int err;
-+
-+ err = kstrtol(buf, 10, &val);
-+ if (err < 0)
-+ return err;
-+
-+ err = write_temp11(dev, nr, index, val);
-+ if (err < 0)
-+ return err;
-+
- return count;
- }
-
diff --git a/target/linux/apm821xx/patches-4.4/912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch b/target/linux/apm821xx/patches-4.4/912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch
deleted file mode 100644
index 9eb9ceeaac..0000000000
--- a/target/linux/apm821xx/patches-4.4/912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Wei Ni <wni at nvidia.com>
-Subject: hwmon: lm90: expose to thermal fw via DT nodes
-
-This patch adds to lm90 temperature sensor the possibility
-to expose itself as thermal zone device, registered on the
-thermal framework.
-
-The thermal zone is built only if a device tree node
-describing a thermal zone for this sensor is present
-inside the lm90 DT node. Otherwise, the driver behavior
-will be the same.
-
-Discussed in:
-http://www.gossamer-threads.com/lists/linux/kernel/1992853
-
-BUG=chrome-os-partner:30834
-TEST=Verified. Build and boot up system.
-
-Signed-off-by: Wei Ni <wni at nvidia.com>
-Reviewed-on: https://chromium-review.googlesource.com/181447
-Reviewed-by: Dylan Reid <dgreid at chromium.org>
-Tested-by: Dylan Reid <dgreid at chromium.org>
-Commit-Queue: Dylan Reid <dgreid at chromium.org>
-Change-Id: Id356b94d7e8f4b49ec15e46b17a1fa2ff0cbf8cf
-Reviewed-on: https://chromium-review.googlesource.com/212414
-Tested-by: Wei Ni <wni.nvidia at gmail.com>
-Reviewed-by: Olof Johansson <olofj at chromium.org>
-Commit-Queue: Olof Johansson <olofj at chromium.org>
----
---- a/drivers/hwmon/lm90.c
-+++ b/drivers/hwmon/lm90.c
-@@ -96,6 +96,8 @@
- #include <linux/sysfs.h>
- #include <linux/interrupt.h>
- #include <linux/regulator/consumer.h>
-+#include <linux/of.h>
-+#include <linux/thermal.h>
-
- /*
- * Addresses to scan
-@@ -119,6 +121,13 @@ static const unsigned short normal_i2c[]
- enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
- max6646, w83l771, max6696, sa56004, g781, tmp451 };
-
-+enum sensor_id {
-+ LOCAL = 0,
-+ REMOTE,
-+ REMOTE2,
-+ SENSOR_ID_END,
-+};
-+
- /*
- * The LM90 registers
- */
-@@ -368,6 +377,7 @@ struct lm90_data {
- struct i2c_client *client;
- struct device *hwmon_dev;
- const struct attribute_group *groups[6];
-+ struct thermal_zone_device *tz[SENSOR_ID_END];
- struct mutex update_lock;
- struct regulator *regulator;
- char valid; /* zero until following fields are valid */
-@@ -880,6 +890,24 @@ static ssize_t show_temp11(struct device
- return sprintf(buf, "%d\n", read_temp11(dev, attr->index));
- }
-
-+static int lm90_read_local_temp(void *dev, int *temp)
-+{
-+ *temp = read_temp11(dev, 4);
-+ return 0;
-+}
-+
-+static int lm90_read_remote_temp(void *dev, int *temp)
-+{
-+ *temp = read_temp11(dev, 0);
-+ return 0;
-+}
-+
-+static int lm90_read_remote2_temp(void *dev, int *temp)
-+{
-+ *temp = read_temp11(dev, 5);
-+ return 0;
-+}
-+
- static int write_temp11(struct device *dev, int nr, int index, long val)
- {
- struct {
-@@ -1210,6 +1238,18 @@ static const struct attribute_group lm90
- .attrs = lm90_temp3_attributes,
- };
-
-+static const struct thermal_zone_of_device_ops local_temp_sensor = {
-+ .get_temp = lm90_read_local_temp,
-+};
-+
-+static const struct thermal_zone_of_device_ops remote_temp_sensor = {
-+ .get_temp = lm90_read_remote_temp,
-+};
-+
-+static const struct thermal_zone_of_device_ops remote2_temp_sensor = {
-+ .get_temp = lm90_read_remote2_temp,
-+};
-+
- /* pec used for ADM1032 only */
- static ssize_t show_pec(struct device *dev, struct device_attribute *dummy,
- char *buf)
-@@ -1659,6 +1699,30 @@ static int lm90_probe(struct i2c_client
- }
- }
-
-+ data->tz[LOCAL] = thermal_zone_of_sensor_register(&client->dev,
-+ LOCAL,
-+ &client->dev,
-+ &local_temp_sensor);
-+ if (IS_ERR(data->tz[LOCAL]))
-+ data->tz[LOCAL] = NULL;
-+
-+ data->tz[REMOTE] = thermal_zone_of_sensor_register(&client->dev,
-+ REMOTE,
-+ &client->dev,
-+ &remote_temp_sensor);
-+ if (IS_ERR(data->tz[REMOTE]))
-+ data->tz[REMOTE] = NULL;
-+
-+ if (data->flags & LM90_HAVE_TEMP3) {
-+ data->tz[REMOTE2] = thermal_zone_of_sensor_register(
-+ &client->dev,
-+ REMOTE2,
-+ &client->dev,
-+ &remote2_temp_sensor);
-+ if (IS_ERR(data->tz[REMOTE2]))
-+ data->tz[REMOTE2] = NULL;
-+ }
-+
- return 0;
-
- exit_unregister:
-@@ -1674,8 +1738,11 @@ exit_restore:
-
- static int lm90_remove(struct i2c_client *client)
- {
-+ int i;
- struct lm90_data *data = i2c_get_clientdata(client);
-
-+ for (i = 0; i < SENSOR_ID_END; i++)
-+ thermal_zone_of_sensor_unregister(&client->dev, data->tz[i]);
- hwmon_device_unregister(data->hwmon_dev);
- device_remove_file(&client->dev, &dev_attr_pec);
- lm90_restore_conf(client, data);
--
2.11.0
More information about the Lede-dev
mailing list