[LEDE-DEV] ar71xx: tl-wr940n v4: invalid default switch config

[daniel]

Hi Eric,

it's not the case with this change, I already checked that.
LAN and WAN are separated properly.

On 02/06/2017 01:53 PM, Eric Luehrsen wrote:
> I am not familiar with this model but ... With tplink you need to be careful
> with the VLAN. As a cost save, they can use just one CPU eth link tagged as the
> LAN/WAN to the switch. You want to be sure you dont bridge LAN/WAN and defeat
> your firewall.
> - Eric 
> 
> -------- Original message --------
> From: daniel <daniel at dd-wrt.com>
> Date: 2/6/17 16:29 (GMT-05:00)
> To: lede-dev at lists.infradead.org
> Subject: [LEDE-DEV]  ar71xx: tl-wr940n v4: invalid default switch config
> 

-- 
Regards

Daniel Danzberger
embeDD GmbH, Breitenweg 10, CH-6370 Stans