[LEDE-DEV] [PATCH 0/4] Add support for the TRENDnet TEW-827DRU (tew827dru)

[J Mo]

This is an initial patch set proposal to add support for the TRENDnet TEW-827DRU.

Especially notice the FIT builder block I put in image-commands.mk. It should probably not go there, but I don't know of an alternative because it can't go into the device makefile.

Finally note that patch 494-mtd-ubi-add-EOF-marker-support.patch current prevents this device from booting. See LEDE bug FS#161. The patch either needs to get fixed or removed.

jmomo (4):
  Add new script: scripts/its-maker.sh
  Add support for new device: tew827dru
  DTS file for the tew827dru
  Add bootconfig and flash script for the tew827dru

 include/image-commands.mk                          |  45 ++
 package/boot/uboot-envtools/files/ipq              |   3 +
 scripts/its-maker.sh                               | 598 +++++++++++++++++++++
 .../linux/ipq806x/base-files/etc/board.d/01_leds   |   6 +
 .../ipq806x/base-files/etc/board.d/02_network      |   4 +
 target/linux/ipq806x/base-files/etc/diag.sh        |   3 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata       |   8 +
 .../etc/hotplug.d/ieee80211/10_fix_wifi_mac        |   3 +
 target/linux/ipq806x/base-files/lib/ipq806x.sh     |   3 +
 .../base-files/lib/preinit/06_set_iface_mac        |  24 +
 .../ipq806x/base-files/lib/upgrade/platform.sh     |   6 +-
 .../arch/arm/boot/dts/qcom-ipq8064-tew827dru.dts   | 357 ++++++++++++
 target/linux/ipq806x/image/Makefile                |  19 +-
 .../linux/ipq806x/image/tew827dru-bootconfig.bin   | Bin 0 -> 84 bytes
 target/linux/ipq806x/image/tew827dru-flash.scr     |  57 ++
 .../linux/ipq806x/patches-4.4/800-devicetree.patch |   1 +
 16 files changed, 1134 insertions(+), 3 deletions(-)
 create mode 100644 scripts/its-maker.sh
 create mode 100644 target/linux/ipq806x/base-files/lib/preinit/06_set_iface_mac
 create mode 100644 target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-tew827dru.dts
 create mode 100644 target/linux/ipq806x/image/tew827dru-bootconfig.bin
 create mode 100644 target/linux/ipq806x/image/tew827dru-flash.scr

-- 
2.9.3