[LEDE-DEV] Help on porting new device (DCS-933L)

[John Crispin]

On 14/12/2016 09:22, Luiz Angelo Daros de Luca wrote:
> Hi John,
> 
> I did not get your mails. I just saw them on the maillist history.
> 
> My device is labeled A1 (external tag). However, the ID on board is B1
> (and according to openwrt wiki, A1 should use a different SoC).
> If I consider only the external tag, it is DCS-933L A1. Anyway, A1 and
> A2 shares the same firmware.
> 
> I already tried to use this script to set all GPIO to 0 or 1 without
> the webcam appearing.
> https://wiki.openwrt.org/doc/hardware/port.gpio#script_static
> 
> Would it be enough? Or I need to somehow reset the usb hub? Could it
> be using some already reserved gpio?
> 
> Regards,

you would need to also set pinmux. i'll download the B1 gpl tarball and
have a look. afair the webcam is not supported out of the box by the uvc
driver so you'll need to patch that anyhow. i recall having to do so for
the dcs930

	John