[kvm-unit-tests PATCH 07/13] riscv: Enable building for EFI

[Andrew Jones]

Mimicking arm64 support, add configure and makefile changes to build
for EFI. Since the linker script is replaced also replace the initial
cstart code (also done like arm64). Finally, provide a stub for
setup_efi() in order to allow compiling to complete (even though
tests can't yet run).

Signed-off-by: Andrew Jones <andrew.jones at linux.dev>
---
 configure             |  3 ++-
 lib/riscv/asm/setup.h |  5 +++++
 riscv/Makefile        | 24 +++++++++++++++++++++++-
 riscv/cstart.S        |  4 ++++
 4 files changed, 34 insertions(+), 2 deletions(-)

diff --git a/configure b/configure
index 283c959973fd..cb1718ce12e6 100755
--- a/configure
+++ b/configure
@@ -230,7 +230,8 @@ else
     fi
 fi
 
-if [ "$efi" ] && [ "$arch" != "x86_64" ] && [ "$arch" != "arm64" ]; then
+if [ "$efi" ] && [ "$arch" != "x86_64" ] &&
+   [ "$arch" != "arm64" ] && [ "$arch" != "riscv64" ]; then
     echo "--[enable|disable]-efi is not supported for $arch"
     usage
 fi
diff --git a/lib/riscv/asm/setup.h b/lib/riscv/asm/setup.h
index e58dd53071ae..dfc8875fbb3b 100644
--- a/lib/riscv/asm/setup.h
+++ b/lib/riscv/asm/setup.h
@@ -12,4 +12,9 @@ int hartid_to_cpu(unsigned long hartid);
 void io_init(void);
 void setup(const void *fdt, phys_addr_t freemem_start);
 
+#ifdef CONFIG_EFI
+#include <efi.h>
+static inline efi_status_t setup_efi(efi_bootinfo_t *efi_bootinfo) { return 0; }
+#endif
+
 #endif /* _ASMRISCV_SETUP_H_ */
diff --git a/riscv/Makefile b/riscv/Makefile
index 85bbca151739..e1803c133e71 100644
--- a/riscv/Makefile
+++ b/riscv/Makefile
@@ -85,7 +85,29 @@ include $(SRCDIR)/scripts/asm-offsets.mak
 		-DPROGNAME=\"$(notdir $(@:.aux.o=.$(exe)))\" -DAUXFLAGS=$(AUXFLAGS)
 
 ifeq ($(CONFIG_EFI),y)
-	# TODO
+# avoid jump tables before all relocations have been processed
+riscv/efi/reloc_riscv64.o: CFLAGS += -fno-jump-tables
+cflatobjs += riscv/efi/reloc_riscv64.o
+cflatobjs += lib/acpi.o
+cflatobjs += lib/efi.o
+
+#.PRECIOUS: %.so
+
+%.so: EFI_LDFLAGS += -defsym=EFI_SUBSYSTEM=0xa --no-undefined
+%.so: %.o $(FLATLIBS) $(SRCDIR)/riscv/efi/elf_riscv64_efi.lds $(cstart.o) %.aux.o
+	$(LD) $(EFI_LDFLAGS) -o $@ -T $(SRCDIR)/riscv/efi/elf_riscv64_efi.lds \
+		$(filter %.o, $^) $(FLATLIBS) $(EFI_LIBS)
+
+%.efi: %.so
+	$(call arch_elf_check, $^)
+	$(OBJCOPY) --only-keep-debug $^ $@.debug
+	$(OBJCOPY) --strip-debug $^
+	$(OBJCOPY) --add-gnu-debuglink=$@.debug $^
+	$(OBJCOPY) \
+		-j .text -j .sdata -j .data -j .rodata -j .dynamic -j .dynsym \
+		-j .rel -j .rela -j .rel.* -j .rela.* -j .rel* -j .rela* \
+		-j .reloc \
+		-O binary $^ $@
 else
 %.elf: LDFLAGS += -pie -n -z notext
 %.elf: %.o $(FLATLIBS) $(SRCDIR)/riscv/flat.lds $(cstart.o) %.aux.o
diff --git a/riscv/cstart.S b/riscv/cstart.S
index c935467ff6a1..10b5da5779b0 100644
--- a/riscv/cstart.S
+++ b/riscv/cstart.S
@@ -42,6 +42,9 @@
 9997:
 .endm
 
+#ifdef CONFIG_EFI
+#include "efi/crt0-efi-riscv64.S"
+#else
 	.section .init
 
 /*
@@ -109,6 +112,7 @@ start:
 	call	exit
 	j	halt
 
+#endif /* !CONFIG_EFI */
 	.text
 
 .balign 4
-- 
2.43.0