[PATCHv5 05/12] kexec: Introduce kexec_pe_image to parse and load PE file
Philipp Rudo
prudo at redhat.com
Mon Sep 1 07:30:20 PDT 2025
Hi Pingfan,
a few nits in addition to what is mentioned in the cover letter.
On Tue, 19 Aug 2025 09:24:21 +0800
Pingfan Liu <piliu at redhat.com> wrote:
> As UEFI becomes popular, a few architectures support to boot a PE format
> kernel image directly. But the internal of PE format varies, which means
> each parser for each format.
>
> This patch (with the rest in this series) introduces a common skeleton
> to all parsers, and leave the format parsing in
> bpf-prog, so the kernel code can keep relative stable.
>
> A new kexec_file_ops is implementation, named pe_image_ops.
>
> There are some place holder function in this patch. (They will take
> effect after the introduction of kexec bpf light skeleton and bpf
> helpers). Overall the parsing progress is a pipeline, the current
> bpf-prog parser is attached to bpf_handle_pefile(), and detatched at the
> end of the current stage 'disarm_bpf_prog()' the current parsed result
> by the current bpf-prog will be buffered in kernel 'prepare_nested_pe()'
> , and deliver to the next stage. For each stage, the bpf bytecode is
> extracted from the '.bpf' section in the PE file.
>
> Signed-off-by: Pingfan Liu <piliu at redhat.com>
> Cc: Baoquan He <bhe at redhat.com>
> Cc: Dave Young <dyoung at redhat.com>
> Cc: Andrew Morton <akpm at linux-foundation.org>
> Cc: Philipp Rudo <prudo at redhat.com>
> To: kexec at lists.infradead.org
> ---
> include/linux/kexec.h | 1 +
> kernel/Kconfig.kexec | 9 ++
> kernel/Makefile | 1 +
> kernel/kexec_pe_image.c | 348 ++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 359 insertions(+)
> create mode 100644 kernel/kexec_pe_image.c
[...]
> new file mode 100644
> index 0000000000000..b0cf9942e68d2
> --- /dev/null
> +++ b/kernel/kexec_pe_image.c
> @@ -0,0 +1,348 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Kexec PE image loader
> +
> + * Copyright (C) 2025 Red Hat, Inc
> + */
> +
> +#define pr_fmt(fmt) "kexec_file(Image): " fmt
> +
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/list.h>
> +#include <linux/kernel.h>
> +#include <linux/vmalloc.h>
> +#include <linux/kexec.h>
> +#include <linux/pe.h>
> +#include <linux/string.h>
> +#include <linux/bpf.h>
> +#include <linux/filter.h>
> +#include <asm/byteorder.h>
> +#include <asm/image.h>
> +#include <asm/memory.h>
> +
> +
> +#define KEXEC_RES_KERNEL_NAME "kexec:kernel"
> +#define KEXEC_RES_INITRD_NAME "kexec:initrd"
> +#define KEXEC_RES_CMDLINE_NAME "kexec:cmdline"
> +
> +struct kexec_res {
> + char *name;
> + /* The free of buffer is deferred to kimage_file_post_load_cleanup */
> + struct mem_range_result *r;
> +};
> +
> +static struct kexec_res parsed_resource[3] = {
> + { KEXEC_RES_KERNEL_NAME, },
> + { KEXEC_RES_INITRD_NAME, },
> + { KEXEC_RES_CMDLINE_NAME, },
> +};
> +
> +static bool pe_has_bpf_section(const char *file_buf, unsigned long pe_sz);
> +
> +static bool is_valid_pe(const char *kernel_buf, unsigned long kernel_len)
> +{
> + struct mz_hdr *mz;
> + struct pe_hdr *pe;
> +
> + if (!kernel_buf)
> + return false;
> + mz = (struct mz_hdr *)kernel_buf;
> + if (mz->magic != IMAGE_DOS_SIGNATURE)
> + return false;
> + pe = (struct pe_hdr *)(kernel_buf + mz->peaddr);
> + if (pe->magic != IMAGE_NT_SIGNATURE)
> + return false;
> + if (pe->opt_hdr_size == 0) {
> + pr_err("optional header is missing\n");
> + return false;
> + }
> +
> + return pe_has_bpf_section(kernel_buf, kernel_len);
> +}
Also check for
pe32plus_opt_hdr->subsys == IMAGE_SUBSYSTEM_EFI_APPLICATION?
> +
> +static bool is_valid_format(const char *kernel_buf, unsigned long kernel_len)
> +{
> + return is_valid_pe(kernel_buf, kernel_len);
> +}
> +
> +/*
> + * The UEFI Terse Executable (TE) image has MZ header.
> + */
> +static int pe_image_probe(const char *kernel_buf, unsigned long kernel_len)
> +{
> + return is_valid_pe(kernel_buf, kernel_len) ? 0 : -1;
> +}
> +
> +static int pe_get_section(const char *file_buf, const char *sect_name,
> + char **sect_start, unsigned long *sect_sz)
> +{
> + struct pe_hdr *pe_hdr;
> + struct pe32plus_opt_hdr *opt_hdr;
> + struct section_header *sect_hdr;
> + int section_nr, i;
> + struct mz_hdr *mz = (struct mz_hdr *)file_buf;
> +
> + *sect_start = NULL;
> + *sect_sz = 0;
> + pe_hdr = (struct pe_hdr *)(file_buf + mz->peaddr);
> + section_nr = pe_hdr->sections;
> + opt_hdr = (struct pe32plus_opt_hdr *)(file_buf + mz->peaddr + sizeof(struct pe_hdr));
> + sect_hdr = (struct section_header *)((char *)opt_hdr + pe_hdr->opt_hdr_size);
> +
> + for (i = 0; i < section_nr; i++) {
> + if (strcmp(sect_hdr->name, sect_name) == 0) {
> + *sect_start = (char *)file_buf + sect_hdr->data_addr;
> + *sect_sz = sect_hdr->raw_data_size;
> + return 0;
> + }
> + sect_hdr++;
> + }
> +
> + return -1;
> +}
> +
> +static bool pe_has_bpf_section(const char *file_buf, unsigned long pe_sz)
> +{
> + char *sect_start = NULL;
> + unsigned long sect_sz = 0;
> + int ret;
> +
> + ret = pe_get_section(file_buf, ".bpf", §_start, §_sz);
> + if (ret < 0)
> + return false;
> + return true;
> +}
> +
> +/* Load a ELF */
> +static int arm_bpf_prog(char *bpf_elf, unsigned long sz)
> +{
> + return 0;
> +}
> +
> +static void disarm_bpf_prog(void)
> +{
> +}
> +
> +struct kexec_context {
> + bool kdump;
> + char *image;
> + int image_sz;
> + char *initrd;
> + int initrd_sz;
> + char *cmdline;
> + int cmdline_sz;
> +};
> +
> +void bpf_handle_pefile(struct kexec_context *context);
> +void bpf_post_handle_pefile(struct kexec_context *context);
> +
> +
> +/*
> + * optimize("O0") prevents inline, compiler constant propagation
> + */
> +__attribute__((used, optimize("O0"))) void bpf_handle_pefile(struct kexec_context *context)
> +{
> + /*
> + * To prevent linker from Identical Code Folding (ICF) with bpf_handle_pefile,
> + * making them have different code.
> + */
> + volatile int dummy = 0;
> +
> + dummy += 1;
> +}
> +
> +__attribute__((used, optimize("O0"))) void bpf_post_handle_pefile(struct kexec_context *context)
> +{
> + volatile int dummy = 0;
> +
> + dummy += 2;
> +}
> +
> +/*
> + * PE file may be nested and should be unfold one by one.
> + * Query 'kernel', 'initrd', 'cmdline' in cur_phase, as they are inputs for the
> + * next phase.
> + */
> +static int prepare_nested_pe(char **kernel, unsigned long *kernel_len, char **initrd,
> + unsigned long *initrd_len, char **cmdline)
> +{
> + struct kexec_res *res;
> + int ret = -1;
> +
> + *kernel = NULL;
> + *kernel_len = 0;
> +
> + res = &parsed_resource[0];
> + if (!!res->r) {
> + *kernel = res->r->buf;
> + *kernel_len = res->r->data_sz;
> + ret = 0;
> + }
> +
> + res = &parsed_resource[1];
> + if (!!res->r) {
> + *initrd = res->r->buf;
> + *initrd_len = res->r->data_sz;
> + }
> +
> + res = &parsed_resource[2];
> + if (!!res->r) {
> + *cmdline = res->r->buf;
> + }
> +
> + return ret;
> +}
> +
> +static void *pe_image_load(struct kimage *image,
> + char *kernel, unsigned long kernel_len,
> + char *initrd, unsigned long initrd_len,
> + char *cmdline, unsigned long cmdline_len)
> +{
> + char *linux_start, *initrd_start, *cmdline_start, *bpf_start;
> + unsigned long linux_sz, initrd_sz, cmdline_sz, bpf_sz;
I don't see a point in defining all the
{linux,initrd,cmdline}_{start,sz} variables. Either you could reuse
the corresponding {kernel,initrd,cmdline} variables from the function
definition. Or better use a kexec_context that contains the same
information.
> + struct kexec_res *res;
> + struct mem_range_result *r;
> + void *ldata;
> + int ret;
> +
> + linux_start = kernel;
> + linux_sz = kernel_len;
> + initrd_start = initrd;
> + initrd_sz = initrd_len;
> + cmdline_start = cmdline;
> + cmdline_sz = cmdline_len;
> +
> + while (is_valid_format(linux_start, linux_sz) &&
> + pe_has_bpf_section(linux_start, linux_sz)) {
> + struct kexec_context context;
> +
> + pe_get_section((const char *)linux_start, ".bpf", &bpf_start, &bpf_sz);
> + if (!!bpf_sz) {
> + /* load and attach bpf-prog */
> + ret = arm_bpf_prog(bpf_start, bpf_sz);
> + if (ret) {
> + pr_err("Fail to load .bpf section\n");
> + ldata = ERR_PTR(ret);
> + goto err;
> + }
> + }
> + if (image->type != KEXEC_TYPE_CRASH)
> + context.kdump = false;
> + else
> + context.kdump = true;
The bpf_prog cannot change whether kexec is used to load a kdump or
normal kernel. So this check can be moved outside the loop.
> + context.image = linux_start;
> + context.image_sz = linux_sz;
> + context.initrd = initrd_start;
> + context.initrd_sz = initrd_sz;
> + context.cmdline = cmdline_start;
> + context.cmdline_sz = strlen(cmdline_start);
> + /* bpf-prog fentry, which handle above buffers. */
> + bpf_handle_pefile(&context);
> +
> + prepare_nested_pe(&linux_start, &linux_sz, &initrd_start,
> + &initrd_sz, &cmdline_start);
> + /* bpf-prog fentry */
> + bpf_post_handle_pefile(&context);
> + /*
> + * detach the current bpf-prog from their attachment points.
> + */
> + disarm_bpf_prog();
> + }
> +
> + /*
> + * image's kernel_buf, initrd_buf, cmdline_buf are set. Now they should
> + * be updated to the new content.
> + */
> +
> + res = &parsed_resource[0];
> + /* Kernel part should always be parsed */
> + if (!res->r) {
> + pr_err("Can not parse kernel\n");
> + ldata = ERR_PTR(-EINVAL);
> + goto err;
> + }
> + kernel = res->r->buf;
> + kernel_len = res->r->data_sz;
> + vfree(image->kernel_buf);
> + image->kernel_buf = kernel;
> + image->kernel_buf_len = kernel_len;
Can't you assign the output to image->kernel_buf{_len} directly? Same
for initrd and cmdline.
> +
> + res = &parsed_resource[1];
> + if (!!res->r) {
> + initrd = res->r->buf;
> + initrd_len = res->r->data_sz;
> + vfree(image->initrd_buf);
> + image->initrd_buf = initrd;
> + image->initrd_buf_len = initrd_len;
> + }
> + res = &parsed_resource[2];
> + if (!!res->r) {
> + cmdline = res->r->buf;
> + cmdline_len = res->r->data_sz;
> + kfree(image->cmdline_buf);
> + image->cmdline_buf = cmdline;
> + image->cmdline_buf_len = cmdline_len;
> + }
> +
> + if (kernel == NULL || initrd == NULL || cmdline == NULL) {
> + char *c, buf[64];
> +
> + c = buf;
> + if (kernel == NULL) {
> + strcpy(c, "kernel ");
> + c += strlen("kernel ");
> + }
> + if (initrd == NULL) {
> + strcpy(c, "initrd ");
> + c += strlen("initrd ");
> + }
> + if (cmdline == NULL) {
> + strcpy(c, "cmdline ");
> + c += strlen("cmdline ");
> + }
> + c = '\0';
> + pr_err("Can not extract data for %s", buf);
> + ldata = ERR_PTR(-EINVAL);
> + goto err;
> + }
This check needs to go. Not having a initrd or cmdline is not an error
plus not having a kernel already throws an error above. In case you
want to keep the error message for debugging purpose you can add it to
the 'else' paths above.
> +
> + ret = arch_kexec_kernel_image_probe(image, image->kernel_buf,
> + image->kernel_buf_len);
> + if (ret) {
> + pr_err("Fail to find suitable image loader\n");
> + ldata = ERR_PTR(ret);
> + goto err;
> + }
> + ldata = kexec_image_load_default(image);
> + if (IS_ERR(ldata)) {
> + pr_err("architecture code fails to load image\n");
> + goto err;
> + }
> + image->image_loader_data = ldata;
> +
> +err:
> + for (int i = 0; i < 3; i++) {
Can you please get rid of the magic '3', e.g. by using ARRAY_SIZE.
Thanks
Philipp
> + r = parsed_resource[i].r;
> + if (!r)
> + continue;
> + parsed_resource[i].r = NULL;
> + /*
> + * The release of buffer defers to
> + * kimage_file_post_load_cleanup()
> + */
> + r->buf = NULL;
> + r->buf_sz = 0;
> + mem_range_result_put(r);
> + }
> +
> + return ldata;
> +}
> +
> +const struct kexec_file_ops kexec_pe_image_ops = {
> + .probe = pe_image_probe,
> + .load = pe_image_load,
> +#ifdef CONFIG_KEXEC_IMAGE_VERIFY_SIG
> + .verify_sig = kexec_kernel_verify_pe_sig,
> +#endif
> +};
More information about the kexec
mailing list