[PATCH v15 4/5] powerpc: add crash CPU hotplug support

[Hari Bathini]

On 11/01/24 4:21 pm, Sourabh Jain wrote:
> Due to CPU/Memory hotplug or online/offline events, the elfcorehdr
> (which describes the CPUs and memory of the crashed kernel) and FDT
> (Flattened Device Tree) of kdump image becomes outdated. Consequently,
> attempting dump collection with an outdated elfcorehdr or FDT can lead
> to failed or inaccurate dump collection.
> 
> Going forward, CPU hotplug or online/offline events are referred as
> CPU/Memory add/remove events.
> 
> The current solution to address the above issue involves monitoring the
> CPU/Memory add/remove events in userspace using udev rules and whenever
> there are changes in CPU and memory resources, the entire kdump image
> is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
> FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
> CPU/Memory add/remove events, reloading the entire kdump image is
> inefficient. More importantly, kdump remains inactive for a substantial
> amount of time until the kdump reload completes.
> 
> To address the aforementioned issue, commit 247262756121 ("crash: add
> generic infrastructure for crash hotplug support") added a generic
> infrastructure that allows architectures to selectively update the kdump
> image component during CPU or memory add/remove events within the kernel
> itself.
> 
> In the event of a CPU or memory add/remove events, the generic crash
> hotplug event handler, `crash_handle_hotplug_event()`, is triggered. It
> then acquires the necessary locks to update the kdump image and invokes
> the architecture-specific crash hotplug handler,
> `arch_crash_handle_hotplug_event()`, to update the required kdump image
> components.
> 
> This patch adds crash hotplug handler for PowerPC and enable support to
> update the kdump image on CPU add/remove events. Support for memory
> add/remove events is added in a subsequent patch with the title
> "powerpc: add crash memory hotplug support"
> 
> As mentioned earlier, only the elfcorehdr and FDT kdump image components
> need to be updated in the event of CPU or memory add/remove events.
> However, on PowerPC architecture crash hotplug handler only updates the
> FDT to enable crash hotplug support for CPU add/remove events. Here's
> why.
> 
> The elfcorehdr on PowerPC is built with possible CPUs, and thus, it does
> not need an update on CPU add/remove events. On the other hand, the FDT
> needs to be updated on CPU add events to include the newly added CPU. If
> the FDT is not updated and the kernel crashes on a newly added CPU, the
> kdump kernel will fail to boot due to the unavailability of the crashing
> CPU in the FDT. During the early boot, it is expected that the boot CPU
> must be a part of the FDT; otherwise, the kernel will raise a BUG and
> fail to boot. For more information, refer to commit 36ae37e3436b0
> ("powerpc: Make boot_cpuid common between 32 and 64-bit"). Since it is
> okay to have an offline CPU in the kdump FDT, no action is taken in case
> of CPU removal.
> 
> There are two system calls, `kexec_file_load` and `kexec_load`, used to
> load the kdump image. Few changes have been made to ensure kernel can
> safely update the FDT of kdump image loaded using both system calls.
> 
> For kexec_file_load syscall the kdump image is prepared in kernel. So to
> support an increasing number of CPUs, the FDT is constructed with extra
> buffer space to ensure it can accommodate a possible number of CPU
> nodes. Additionally, a call to fdt_pack (which trims the unused space
> once the FDT is prepared) is avoided if this feature is enabled.
> 
> For the kexec_load syscall, the FDT is updated only if the
> KEXEC_CRASH_HOTPLUG_SUPPORT kexec flag is passed to the kernel by
> userspace (kexec tools). When userspace passes this flag to the kernel,
> it indicates that the FDT is built to accommodate possible CPUs, and the
> FDT segment is excluded from SHA calculation, making it safe to update.
> 
> The changes related to this feature are kept under the CRASH_HOTPLUG
> config, and it is enabled by default.
> 
> Signed-off-by: Sourabh Jain <sourabhjain at linux.ibm.com>
> Cc: Akhil Raj <lf32.dev at gmail.com>
> Cc: Andrew Morton <akpm at linux-foundation.org>
> Cc: Aneesh Kumar K.V <aneesh.kumar at kernel.org>
> Cc: Baoquan He <bhe at redhat.com>
> Cc: Borislav Petkov (AMD) <bp at alien8.de>
> Cc: Boris Ostrovsky <boris.ostrovsky at oracle.com>
> Cc: Christophe Leroy <christophe.leroy at csgroup.eu>
> Cc: Dave Hansen <dave.hansen at linux.intel.com>
> Cc: Dave Young <dyoung at redhat.com>
> Cc: David Hildenbrand <david at redhat.com>
> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Cc: Hari Bathini <hbathini at linux.ibm.com>
> Cc: Laurent Dufour <laurent.dufour at fr.ibm.com>
> Cc: Mahesh Salgaonkar <mahesh at linux.ibm.com>
> Cc: Michael Ellerman <mpe at ellerman.id.au>
> Cc: Mimi Zohar <zohar at linux.ibm.com>
> Cc: Naveen N Rao <naveen at kernel.org>
> Cc: Oscar Salvador <osalvador at suse.de>
> Cc: Thomas Gleixner <tglx at linutronix.de>
> Cc: Valentin Schneider <vschneid at redhat.com>
> Cc: Vivek Goyal <vgoyal at redhat.com>
> Cc: kexec at lists.infradead.org
> Cc: x86 at kernel.org
> ---
>   arch/powerpc/Kconfig              |  4 ++
>   arch/powerpc/include/asm/kexec.h  |  6 +++
>   arch/powerpc/kexec/core_64.c      | 69 +++++++++++++++++++++++++++++++
>   arch/powerpc/kexec/elf_64.c       | 12 +++++-
>   arch/powerpc/kexec/file_load_64.c | 15 +++++++
>   5 files changed, 105 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 414b978b8010..91d7bb0b81ee 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -682,6 +682,10 @@ config RELOCATABLE_TEST
>   config ARCH_SUPPORTS_CRASH_DUMP
>   	def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
>   
> +config ARCH_SUPPORTS_CRASH_HOTPLUG
> +	def_bool y
> +	depends on PPC64
> +
>   config ARCH_SELECTS_CRASH_DUMP
>   	def_bool y
>   	depends on CRASH_DUMP
> diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
> index 562e1bb689da..943e58eb9bff 100644
> --- a/arch/powerpc/include/asm/kexec.h
> +++ b/arch/powerpc/include/asm/kexec.h
> @@ -112,6 +112,12 @@ void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
>   struct crash_mem;
>   int update_cpus_node(void *fdt);
>   int get_crash_memory_ranges(struct crash_mem **mem_ranges);
> +
> +#ifdef CONFIG_CRASH_HOTPLUG
> +void arch_crash_handle_hotplug_event(struct kimage *image, void *arg);
> +#define arch_crash_handle_hotplug_event arch_crash_handle_hotplug_event
> +#endif /*CONFIG_CRASH_HOTPLUG */
> +
>   #endif /* CONFIG_PPC64 */
>   
>   #ifdef CONFIG_KEXEC_FILE
> diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
> index 48beaadcfb70..43fcd78c2102 100644
> --- a/arch/powerpc/kexec/core_64.c
> +++ b/arch/powerpc/kexec/core_64.c
> @@ -542,6 +542,75 @@ int update_cpus_node(void *fdt)
>   	return ret;
>   }
>   


> +#ifdef CONFIG_CRASH_HOTPLUG
> +#undef pr_fmt
> +#define pr_fmt(fmt) "crash hp: " fmt
> +
> +/**
> + * arch_crash_handle_hotplug_event - Handle crash CPU/Memory hotplug events to update the
> + *				     necessary kexec segments based on the hotplug event.
> + * @image: a pointer to kexec_crash_image
> + * @arg: struct memory_notify handler for memory hotplug case and NULL for CPU hotplug case.
> + *
> + * Update the kdump image based on the type of hotplug event, represented by image->hp_action.
> + * CPU addition: Update the FDT segment to include the newly added CPU.
> + * CPU removal: No action is needed, with the assumption that it's okay to have offline CPUs
> + *		as part of the FDT.
> + * Memory addition/removal: No action is taken as this is not yet supported.
> + */
> +void arch_crash_handle_hotplug_event(struct kimage *image, void *arg)
> +{
> +	unsigned int hp_action = image->hp_action;
> +
> +	/*
> +	 * Since the hot-unplugged CPU is already part of crash FDT,
> +	 * no action is needed for CPU remove case.
> +	 */
> +	if (hp_action == KEXEC_CRASH_HP_REMOVE_CPU) {
> +		return;
> +
> +	} else if (hp_action == KEXEC_CRASH_HP_ADD_CPU) {
> +
> +		void *fdt, *ptr;
> +		unsigned long mem;
> +		int i, fdt_index = -1;
> +
> +		/* Find the FDT segment index in kexec segment array. */
> +		for (i = 0; i < image->nr_segments; i++) {
> +			mem = image->segment[i].mem;
> +			ptr = __va(mem);
> +
> +			if (ptr && fdt_magic(ptr) == FDT_MAGIC) {
> +				fdt_index = i;
> +				break;
> +			}
> +		}
> +
> +		if (fdt_index < 0) {
> +			pr_err("Unable to locate FDT segment.\n");
> +			return;
> +		}
> +
> +		fdt = __va((void *)image->segment[fdt_index].mem);
> +
> +		/* Temporarily invalidate the crash image while it is replaced */
> +		xchg(&kexec_crash_image, NULL);
> +
> +		/* update FDT to refelect changes in CPU resrouces */
> +		if (update_cpus_node(fdt))
> +			pr_err("Failed to update crash FDT");
> +
> +		/* The crash image is now valid once again */
> +		xchg(&kexec_crash_image, image);
> +
> +	} else if (hp_action == KEXEC_CRASH_HP_REMOVE_MEMORY ||
> +		   hp_action == KEXEC_CRASH_HP_ADD_MEMORY) {
> +		pr_info_once("Crash update is not supported for memory hotplug\n");
> +		return;
> +	}
> +}
> +#endif

Add this code snippet at the end of the file to avoid using this print
format accidentally for code unrelated to hotplug support?

> +
>   #ifdef CONFIG_PPC_64S_HASH_MMU
>   /* Values we need to export to the second kernel via the device tree. */
>   static __be64 htab_base;

Thanks
Hari