[PATCH] makedumpfile add dmesg PRINTK_CALLER id support
HAGIO KAZUHITO(萩尾 一仁)
k-hagio-ab at nec.com
Wed Jan 10 22:55:41 PST 2024
On 2023/12/29 5:33, Edward Chron wrote:
> Submission to Project: makedumpfile
> Component: dmesg
> Files: printk.c makedumpfile.c makedumpfile.h
> Code level patch applied against: 1.7.4++ - latest code pulled from
> https://github.com/makedumpfile/makedumpfile
> makedumpfile Issue #13
> https://github.com/makedumpfile/makedumpfile/issues/13
> Project Owner: Kazuhito Hagio <k-hagio-ab at nec.com>
> Revision: #1 on 2023/12/15 per Kazu ensure spacing of dmesg output
> matches dmesg -S and new dmesg caller_id
> output format (space after timestamp)
> Revision: #2 on 2023/12/21 per Kazu use NOT_FOUND_STRUCTURE for caller_id
> Revision: #3 on 2023/12/21 streamline code for printing caller_id
> Revision: #4 on 2023/12/24 per Kazu make code consistent, drop the
> CALLER_ID_SIZE not needed.
Thanks for the revision. Looks good, will watch the util-linux status.
Thanks,
Kazu
>
> Add support so that dmesg entries include the optional Linux Kernel
> debug CONFIG option PRINTK_CALLER which adds an optional dmesg field
> that contains the Thread Id or CPU Id that is issuing the printk to
> add the message to the kernel ring buffer. If enabled, this CONFIG
> option makes debugging simpler as dmesg entries for a specific
> thread or CPU can be recognized.
>
> The dmesg command supports printing the PRINTK_CALLER field. The
> old syslog format (dmesg -S) and recently support was added for dmesg
> using /dev/kmsg interface.
>
> The additional field provided by PRINTK_CALLER is only present
> if it was configured for the Linux kernel on the running system. The
> PRINTK_CALLER is a debug option and not configured by default so the
> dmesg output will only change for those kernels where the option was
> configured when the kernel was built. For users who went to the
> trouble to configure PRINTK_CALLER and have the extra field available
> for debugging, having dmesg print the field is very helpful and so
> it would be very useful to add makedumpfile support for it.
>
> Size of the PRINTK_CALLER field is determined by the maximum number
> tasks that can be run on the system which is limited by the value of
> /proc/sys/kernel/pid_max as pid values are from 0 to value - 1.
> This value determines the number of id digits needed by the caller id.
> The PRINTK_CALLER field is printed as T<id> for a Task Id or C<id>
> for a CPU Id for a printk in CPU context. The values are left space
> padded and enclosed in parentheses such as:
> [ T123] or [ C16]
> For dmesg command the PRINTK_CALLER field when present is the last
> field before the dmesg text so it makes sense to use the same format.
>
> Signed-off-by: Ivan Delalande <colona at arista.com>
> Signed-off-by: Edward Chron <echron at arista.com>
> ---
> makedumpfile.c | 25 +++++++++++++++++++++++++
> makedumpfile.h | 6 ++++++
> printk.c | 18 ++++++++++++++++++
> 3 files changed, 49 insertions(+)
>
> diff --git a/makedumpfile.c b/makedumpfile.c
> index a6ec9d4..48ca11f 100644
> --- a/makedumpfile.c
> +++ b/makedumpfile.c
> @@ -28,6 +28,10 @@
> #include <assert.h>
> #include <zlib.h>
>
> +#define PID_CHARS_MAX 16 /* Max Number of PID characters */
> +#define PID_CHARS_DEFAULT 8 /* Default number of PID characters */
> +
> +
> struct symbol_table symbol_table;
> struct size_table size_table;
> struct offset_table offset_table;
> @@ -2118,6 +2122,7 @@ module_end:
> SIZE_INIT(printk_info, "printk_info");
> OFFSET_INIT(printk_info.ts_nsec, "printk_info", "ts_nsec");
> OFFSET_INIT(printk_info.text_len, "printk_info", "text_len");
> + OFFSET_INIT(printk_info.caller_id, "printk_info", "caller_id");
>
> OFFSET_INIT(atomic_long_t.counter, "atomic_long_t", "counter");
>
> @@ -2133,6 +2138,7 @@ module_end:
> OFFSET_INIT(printk_log.ts_nsec, "printk_log", "ts_nsec");
> OFFSET_INIT(printk_log.len, "printk_log", "len");
> OFFSET_INIT(printk_log.text_len, "printk_log", "text_len");
> + OFFSET_INIT(printk_log.caller_id, "printk_log", "caller_id");
> } else {
> info->flag_use_printk_ringbuffer = FALSE;
> info->flag_use_printk_log = FALSE;
> @@ -2462,6 +2468,7 @@ write_vmcoreinfo_data(void)
>
> WRITE_MEMBER_OFFSET("printk_info.ts_nsec", printk_info.ts_nsec);
> WRITE_MEMBER_OFFSET("printk_info.text_len", printk_info.text_len);
> + WRITE_MEMBER_OFFSET("printk_info.caller_id", printk_info.caller_id);
>
> WRITE_MEMBER_OFFSET("atomic_long_t.counter", atomic_long_t.counter);
>
> @@ -2470,6 +2477,7 @@ write_vmcoreinfo_data(void)
> WRITE_MEMBER_OFFSET("printk_log.ts_nsec", printk_log.ts_nsec);
> WRITE_MEMBER_OFFSET("printk_log.len", printk_log.len);
> WRITE_MEMBER_OFFSET("printk_log.text_len", printk_log.text_len);
> + WRITE_MEMBER_OFFSET("printk_log.caller_id", printk_log.caller_id);
> } else {
> /* Compatibility with pre-3.11-rc4 */
> WRITE_MEMBER_OFFSET("log.ts_nsec", printk_log.ts_nsec);
> @@ -2921,6 +2929,7 @@ read_vmcoreinfo(void)
> READ_STRUCTURE_SIZE("printk_info", printk_info);
> READ_MEMBER_OFFSET("printk_info.ts_nsec", printk_info.ts_nsec);
> READ_MEMBER_OFFSET("printk_info.text_len", printk_info.text_len);
> + READ_MEMBER_OFFSET("printk_info.caller_id", printk_info.caller_id);
>
> READ_MEMBER_OFFSET("atomic_long_t.counter", atomic_long_t.counter);
>
> @@ -2932,6 +2941,7 @@ read_vmcoreinfo(void)
> READ_MEMBER_OFFSET("printk_log.ts_nsec", printk_log.ts_nsec);
> READ_MEMBER_OFFSET("printk_log.len", printk_log.len);
> READ_MEMBER_OFFSET("printk_log.text_len", printk_log.text_len);
> + READ_MEMBER_OFFSET("printk_log.caller_id", printk_log.caller_id);
> } else {
> info->flag_use_printk_ringbuffer = FALSE;
> info->flag_use_printk_log = FALSE;
> @@ -5604,6 +5614,21 @@ dump_log_entry(char *logptr, int fp, const char *file_name)
>
> bufp = buf;
> bufp += sprintf(buf, "[%5lld.%06ld] ", nanos, rem/1000);
> +
> + if (OFFSET(printk_log.caller_id) != NOT_FOUND_STRUCTURE) {
> + const unsigned int cpuid = 0x80000000;
> + char cidbuf[PID_CHARS_MAX];
> + unsigned int pkc;
> + char idtype;
> +
> + /* Get id type, isolate id value in pkc for print */
> + pkc = UINT(logptr + OFFSET(printk_log.caller_id));
> + idtype = (pkc & cpuid) ? 'C' : 'T';
> + pkc &= ~cpuid;
> + sprintf(cidbuf, "%c%u", idtype, pkc);
> + bufp += sprintf(bufp, "[%*s] ", PID_CHARS_DEFAULT, cidbuf);
> + }
> +
> indent_len = strlen(buf);
>
> /* How much buffer space is needed in the worst case */
> diff --git a/makedumpfile.h b/makedumpfile.h
> index f1619c5..cfdbf42 100644
> --- a/makedumpfile.h
> +++ b/makedumpfile.h
> @@ -2116,10 +2116,16 @@ struct offset_table {
> long p_memsz;
> } elf64_phdr;
>
> + /* The caller_id was added by the Linux-5.1 Kernel to hold
> + * the Thread id or CPU id of the caller adding a printk
> + * dmesg to the ring buffer. As such older versions of the
> + * kernel can ignore this field as it won't be filled in.
> + */
> struct printk_log_s {
> long ts_nsec;
> long len;
> long text_len;
> + long caller_id;
> } printk_log;
>
> /*
> diff --git a/printk.c b/printk.c
> index 61e0b26..d63227c 100644
> --- a/printk.c
> +++ b/printk.c
> @@ -1,6 +1,9 @@
> #include "makedumpfile.h"
> #include <ctype.h>
>
> +#define PID_CHARS_MAX 16 /* Max Number of PID characters */
> +#define PID_CHARS_DEFAULT 8 /* Default number of PID characters */
> +
> /* convenience struct for passing many values to helper functions */
> struct prb_map {
> char *prb;
> @@ -114,6 +117,21 @@ dump_record(struct prb_map *m, unsigned long id)
>
> bufp = buf;
> bufp += sprintf(buf, "[%5lld.%06ld] ", nanos, rem/1000);
> +
> + if (OFFSET(printk_info.caller_id) != NOT_FOUND_STRUCTURE) {
> + const unsigned int cpuid = 0x80000000;
> + char cidbuf[PID_CHARS_MAX];
> + unsigned int pkc;
> + char idtype;
> +
> + /* Get id type, isolate id value in pkc for print */
> + pkc = UINT(inf + OFFSET(printk_info.caller_id));
> + idtype = (pkc & cpuid) ? 'C' : 'T';
> + pkc &= ~cpuid;
> + sprintf(cidbuf, "%c%u", idtype, pkc);
> + bufp += sprintf(bufp, "[%*s] ", PID_CHARS_DEFAULT, cidbuf);
> + }
> +
> indent_len = strlen(buf);
>
> /* How much buffer space is needed in the worst case */
More information about the kexec
mailing list