[RFC PATCH v2 01/23] nl80211_copy.h changes related to Proximity Ranging
Peddolla Harshavardhan Reddy
peddolla.reddy at oss.qualcomm.com
Thu Apr 2 05:24:06 PDT 2026
Bring in the proposed changes from include/uapi/linux/nl80211.h
of wireless-next.git to nl80211_copy.h
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy at oss.qualcomm.com>
---
src/drivers/driver_nl80211_event.c | 2 +
src/drivers/nl80211_copy.h | 229 ++++++++++++++++++++++++++++-
2 files changed, 226 insertions(+), 5 deletions(-)
diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index 6e1e08b70..2fa6e9728 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -192,6 +192,8 @@ static const char * nl80211_command_to_string(enum nl80211_commands cmd)
C2S(NL80211_CMD_NAN_NEXT_DW_NOTIFICATION)
C2S(NL80211_CMD_NAN_CLUSTER_JOINED)
C2S(NL80211_CMD_INCUMBENT_SIGNAL_DETECT)
+ C2S(NL80211_CMD_START_PD)
+ C2S(NL80211_CMD_STOP_PD)
C2S(__NL80211_CMD_AFTER_LAST)
}
#undef C2S
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 67d764023..049e82b79 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -729,7 +729,9 @@
* to remain on the channel. This command is also used as an event to
* notify when the requested duration starts (it may take a while for the
* driver to schedule this time due to other concurrent needs for the
- * radio).
+ * radio). An optional attribute %NL80211_ATTR_MAC can be used to filter
+ * incoming frames during remain-on-channel, such that frames
+ * addressed to the specified destination MAC are reported.
* When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
* that will be included with any events pertaining to this request;
* the cookie is also used to cancel the request.
@@ -1367,6 +1369,12 @@
* %NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP. The current channel
* definition is also sent.
*
+ * @NL80211_CMD_START_PD: Start PD operation, identified by its
+ * %NL80211_ATTR_WDEV interface. This interface must have been previously
+ * created with %NL80211_CMD_NEW_INTERFACE.
+ * @NL80211_CMD_STOP_PD: Stop the PD operation, identified by
+ * its %NL80211_ATTR_WDEV interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1632,6 +1640,9 @@ enum nl80211_commands {
NL80211_CMD_INCUMBENT_SIGNAL_DETECT,
+ NL80211_CMD_START_PD,
+ NL80211_CMD_STOP_PD,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -3675,6 +3686,7 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_OCB: Outside Context of a BSS
* This mode corresponds to the MIB variable dot11OCBActivated=true
* @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
+ * @NL80211_IFTYPE_PD: PD device interface type (not a netdev)
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -3696,6 +3708,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_P2P_DEVICE,
NL80211_IFTYPE_OCB,
NL80211_IFTYPE_NAN,
+ NL80211_IFTYPE_PD,
/* keep last */
NUM_NL80211_IFTYPES,
@@ -5595,6 +5608,18 @@ enum nl80211_key_default_types {
* @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
* Defaults to @NL80211_KEY_RX_TX.
* @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
+ * @NL80211_KEY_LTF_SEED: LTF key seed is used by the driver to generate
+ * secure LTF keys used in case of peer measurement request with FTM
+ * request type as either %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
+ * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED. Secure LTF key seeds
+ * will help enable PHY security in peer measurement session.
+ * The LTF key seed is installed along with the TK (Temporal Key) using
+ * %NL80211_CMD_NEW_KEY. The TK is configured using the
+ * %NL80211_ATTR_KEY_DATA attribute, while the LTF key seed is configured
+ * using this attribute. Both keys must be configured before initiation
+ * of peer measurement to ensure peer measurement session is secure.
+ * Only valid if %NL80211_EXT_FEATURE_SET_KEY_LTF_SEED is set. This
+ * attribute is restricted to pairwise keys (%NL80211_KEYTYPE_PAIRWISE).
*
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
@@ -5611,6 +5636,7 @@ enum nl80211_key_attributes {
NL80211_KEY_DEFAULT_TYPES,
NL80211_KEY_MODE,
NL80211_KEY_DEFAULT_BEACON,
+ NL80211_KEY_LTF_SEED,
/* keep last */
__NL80211_KEY_AFTER_LAST,
@@ -6834,6 +6860,16 @@ enum nl80211_feature_flags {
* (NL80211_CMD_AUTHENTICATE) in non-AP STA mode, as specified in
* "IEEE P802.11bi/D4.0, 12.16.5".
*
+ * @NL80211_EXT_FEATURE_ROC_ADDR_FILTER: Driver supports MAC address
+ * filtering during remain-on-channel. When %NL80211_ATTR_MAC is
+ * provided with %NL80211_CMD_REMAIN_ON_CHANNEL, the driver will
+ * forward frames with a matching MAC address to userspace during
+ * the off-channel period.
+ *
+ * @NL80211_EXT_FEATURE_SET_KEY_LTF_SEED: Driver supports installing the
+ * LTF key seed via %NL80211_KEY_LTF_SEED. The seed is used to generate
+ * secure LTF keys for secure LTF measurement sessions.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -6913,6 +6949,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_EPPKE,
NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION,
NL80211_EXT_FEATURE_IEEE8021X_AUTH,
+ NL80211_EXT_FEATURE_ROC_ADDR_FILTER,
+ NL80211_EXT_FEATURE_SET_KEY_LTF_SEED,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -7778,6 +7816,8 @@ enum nl80211_peer_measurement_resp {
* @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
* measurement type, with attributes from the
* &enum nl80211_peer_measurement_resp inside.
+ * @NL80211_PMSR_PEER_ATTR_PD_REQUEST: flag attribute indicating this is a
+ * peer-to-peer PD request
*
* @NUM_NL80211_PMSR_PEER_ATTRS: internal
* @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
@@ -7789,6 +7829,7 @@ enum nl80211_peer_measurement_peer_attrs {
NL80211_PMSR_PEER_ATTR_CHAN,
NL80211_PMSR_PEER_ATTR_REQ,
NL80211_PMSR_PEER_ATTR_RESP,
+ NL80211_PMSR_PEER_ATTR_PD_REQUEST,
/* keep last */
NUM_NL80211_PMSR_PEER_ATTRS,
@@ -7815,6 +7856,20 @@ enum nl80211_peer_measurement_peer_attrs {
* meaningless, just a list of peers to measure with, with the
* sub-attributes taken from
* &enum nl80211_peer_measurement_peer_attrs.
+ * @NL80211_PMSR_ATTR_PD_MAX_PEER_ISTA_ROLE: u32 attribute indicating the
+ * maximum number of peers allowed for a device operating in the ISTA
+ * (Initiator STA) role under proximity detection. Only valid if
+ * %NL80211_PMSR_FTM_CAPA_ATTR_PD_SUPPORT is set. Sum of both
+ * %NL80211_PMSR_ATTR_PD_MAX_PEER_ISTA_ROLE and
+ * %NL80211_PMSR_ATTR_PD_MAX_PEER_RSTA_ROLE is considered to enforce the
+ * max peers supported in case the request is of peer-to-peer PD type.
+ * @NL80211_PMSR_ATTR_PD_MAX_PEER_RSTA_ROLE: u32 attribute indicating the
+ * maximum number of peers allowed for a device operating in the RSTA
+ * (Responder STA) role under proximity detection. Only valid if
+ * %NL80211_PMSR_FTM_CAPA_ATTR_PD_SUPPORT is set. Sum of both
+ * %NL80211_PMSR_ATTR_PD_MAX_PEER_ISTA_ROLE and
+ * %NL80211_PMSR_ATTR_PD_MAX_PEER_RSTA_ROLE is considered to enforce the
+ * max peers supported in case the request is of peer-to-peer PD type.
*
* @NUM_NL80211_PMSR_ATTR: internal
* @NL80211_PMSR_ATTR_MAX: highest attribute number
@@ -7827,6 +7882,8 @@ enum nl80211_peer_measurement_attrs {
NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR,
NL80211_PMSR_ATTR_TYPE_CAPA,
NL80211_PMSR_ATTR_PEERS,
+ NL80211_PMSR_ATTR_PD_MAX_PEER_ISTA_ROLE,
+ NL80211_PMSR_ATTR_PD_MAX_PEER_RSTA_ROLE,
/* keep last */
NUM_NL80211_PMSR_ATTR,
@@ -7885,6 +7942,60 @@ enum nl80211_peer_measurement_attrs {
* This limits the allowed combinations of LTF repetitions and STS.
* @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the
* device supports operating as the RSTA in PMSR FTM request
+ * @NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS: nested attribute containing ISTA
+ * (initiator) role capabilities. Uses the same sub-attributes as
+ * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS: nested attribute containing RSTA
+ * (responder) role capabilities.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB: flag attribute (used inside
+ * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or
+ * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating NTB ranging support.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB: flag attribute (used inside
+ * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or
+ * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating TB ranging support.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA: flag attribute (used inside
+ * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or
+ * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating EDCA based ranging
+ * support.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PD_SUPPORT: flag attribute indicating that the
+ * device supports peer-to-peer ranging as mentioned in the specification
+ * "PR Implementation Consideration Draft 1.9 rev 1" where PD stands for
+ * proximity detection
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PD_CONCURRENT_ISTA_RSTA_SUPPORT: flag attribute
+ * indicating that as the peer measurement request can be a multi-peer
+ * request, the device can act simultaneously as initiator and a responder,
+ * where the multiple requests are being processed simultaneously. Only
+ * valid if @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT is set.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_RSTA_SUPPORT: flag attribute indicating
+ * the device supports operating as RSTA in the 6 GHz band
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS: u32 attribute indicating
+ * the maximum number of transmit antennas supported for EDCA based ranging
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS: u32 attribute indicating
+ * the maximum number of receive antennas supported for EDCA based ranging
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA: u32 attribute indicating
+ * the minimum EDCA ranging interval supported by the device
+ * in milli seconds. (0 means unknown)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB: u32 attribute indicating
+ * the minimum NTB ranging interval supported by the device
+ * in milli seconds. (0 means unknown)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PD_EDCA_PREAMBLES: u32 bitmap of values from
+ * &enum nl80211_preamble indicating the supported preambles for FTM in
+ * case of PD based EDCA initiator or responder role.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PD_NTB_PREAMBLES: u32 bitmap of values from
+ * &enum nl80211_preamble indicating the supported preambles for FTM in
+ * case of PD based NTB initiator or responder role.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PD_EDCA_BANDWIDTHS: u32 bitmap of values from
+ * &enum nl80211_chan_width indicating the supported channel
+ * bandwidths for FTM in case of PD based EDCA initiator or responder role.
+ * Note that a higher channel bandwidth may be configured to allow for
+ * other measurements types with different bandwidth requirement in the
+ * same measurement.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PD_NTB_BANDWIDTHS: u32 bitmap of values from
+ * &enum nl80211_chan_width indicating the supported channel
+ * bandwidths for FTM in case of PD based NTB initiator or responder role.
+ * Note that a higher channel bandwidth may be configured to allow for
+ * other measurements types with different bandwidth requirement in the
+ * same measurement.
*
* @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -7910,6 +8021,22 @@ enum nl80211_peer_measurement_ftm_capa {
NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX,
NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX,
NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT,
+ NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS,
+ NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS,
+ NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB,
+ NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB,
+ NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA,
+ NL80211_PMSR_FTM_CAPA_ATTR_PD_SUPPORT,
+ NL80211_PMSR_FTM_CAPA_ATTR_PD_CONCURRENT_ISTA_RSTA_SUPPORT,
+ NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_RSTA_SUPPORT,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS,
+ NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA,
+ NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB,
+ NL80211_PMSR_FTM_CAPA_ATTR_PD_EDCA_PREAMBLES,
+ NL80211_PMSR_FTM_CAPA_ATTR_PD_NTB_PREAMBLES,
+ NL80211_PMSR_FTM_CAPA_ATTR_PD_EDCA_BANDWIDTHS,
+ NL80211_PMSR_FTM_CAPA_ATTR_PD_NTB_BANDWIDTHS,
/* keep last */
NUM_NL80211_PMSR_FTM_CAPA_ATTR,
@@ -7934,9 +8061,11 @@ enum nl80211_peer_measurement_ftm_capa {
* default 15 i.e. "no preference"). For non-EDCA ranging, this is the
* burst duration in milliseconds (optional with default 0, i.e. let the
* device decide).
- * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames
- * requested per burst
+ * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: (Optional) number of successful
+ * FTM frames requested per burst
* (u8, 0-31, optional with default 0 i.e. "no preference")
+ * If the attribute is absent ("no preference"), the driver or firmware can
+ * choose a suitable value.
* @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries
* (u8, default 3)
* @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
@@ -7970,7 +8099,47 @@ enum nl80211_peer_measurement_ftm_capa {
* Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the
* RSTA will have the measurement results to report back in the FTM
* response).
- *
+ * @NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: minimum time
+ * between two consecutive range measurements in units of 100 microseconds,
+ * applicable for non-trigger based ranging (u32). Only valid if
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * @NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: maximum time
+ * between two consecutive range measurements in units of 10 milliseconds,
+ * to avoid FTM negotiation, applicable for non-trigger based ranging (u32)
+ * . Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * @NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME: (Optional) The nominal time field
+ * shall be set to the nominal duration between adjacent Availability
+ * Windows in units of milli seconds (u32). Only valid if
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * If the attribute is absent ("no preference"), the driver or firmware
+ * can choose a suitable value.
+ * @NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION: (Optional) The AW duration field
+ * shall be set to the duration of the AW in units of 1ms (0-255 ms) (u32).
+ * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * If the attribute is absent ("no preference"), the driver or firmware
+ * can choose a suitable value.
+ * @NL80211_PMSR_FTM_REQ_ATTR_MEAS_PER_AW: (Optional) This field shall
+ * indicate the number of measurements attempts per AW with a maximum value
+ * of 4 (u32). Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
+ * is set.
+ * If the attribute is absent ("no preference"), the driver or firmware
+ * can choose a suitable value.
+ * @NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS: (Optional) number of
+ * measurements to be performed in total. Only valid if
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * If the attribute is absent ("no preference"), the driver or firmware
+ * can choose a suitable value.
+ * @NL80211_PMSR_FTM_REQ_ATTR_PAD: ignore, for u64/s64 padding only.
+ * @NL80211_PMSR_FTM_REQ_ATTR_INGRESS: the measurement result of the peer
+ * needs to be indicated in case the device moves into this range.
+ * (units mm, u64).
+ * @NL80211_PMSR_FTM_REQ_ATTR_EGRESS: the measurement result of the peer
+ * needs to be indicated in case the device moves out of this range.
+ * (units mm, u64).
+ * @NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS: Flag to suppress ranging
+ * results for PD requests. When set, ranging measurements are performed
+ * but results are not reported to userspace, regardless of ranging role
+ * or type. Only valid when %NL80211_PMSR_PEER_ATTR_PD_REQUEST is set.
* @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
* @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
*/
@@ -7991,6 +8160,16 @@ enum nl80211_peer_measurement_ftm_req {
NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,
NL80211_PMSR_FTM_REQ_ATTR_RSTA,
+ NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS,
+ NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS,
+ NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME,
+ NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION,
+ NL80211_PMSR_FTM_REQ_ATTR_MEAS_PER_AW,
+ NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS,
+ NL80211_PMSR_FTM_REQ_ATTR_PAD,
+ NL80211_PMSR_FTM_REQ_ATTR_INGRESS,
+ NL80211_PMSR_FTM_REQ_ATTR_EGRESS,
+ NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS,
/* keep last */
NUM_NL80211_PMSR_FTM_REQ_ATTR,
@@ -8077,7 +8256,35 @@ enum nl80211_peer_measurement_ftm_failure_reasons {
* @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only
* @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by
* the responder (similar to request, u16)
- *
+ * @NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT: negotiated value of
+ * number of tx ltf repetitions in NDP frames (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT: negotiated value of
+ * number of rx ltf repetitions in NDP frames (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: negotiated value
+ * where latest time by which the ISTA needs to complete the next round of
+ * measurements, in units of 10 ms (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: negotiated
+ * minimum time between two consecutive range measurements initiated by an
+ * ISTA, in units of 100 us (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS: number of Tx space-time
+ * streams used in NDP frames during the measurement sounding phase
+ * (u32, optional).
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS: number of Rx space-time
+ * streams used in the NDP frames during the measurement sounding phase
+ * (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME: negotiated nominal time used in
+ * this session in milliseconds. (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW: negotiated availability
+ * window time used in this session, in units of milli seconds.
+ * (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_MEASUREMENTS_PER_AW: negotiated measurements
+ * per availability window (u32, optional, max value 4)
+ * @NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH: u32 attribute indicating channel
+ * width used for measurement, see &enum nl80211_chan_width (optional).
+ * @NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE: u32 attribute indicating the preamble
+ * type used for the measurement, see &enum nl80211_preamble (optional).
+ * @NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR: flag, indicates if the
+ * current result is delayed LMR data.
* @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal
* @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
*/
@@ -8106,6 +8313,18 @@ enum nl80211_peer_measurement_ftm_resp {
NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
NL80211_PMSR_FTM_RESP_ATTR_PAD,
NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD,
+ NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT,
+ NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT,
+ NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS,
+ NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS,
+ NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME,
+ NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW,
+ NL80211_PMSR_FTM_RESP_ATTR_MEASUREMENTS_PER_AW,
+ NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH,
+ NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE,
+ NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR,
/* keep last */
NUM_NL80211_PMSR_FTM_RESP_ATTR,
--
2.34.1
More information about the Hostap
mailing list