[PATCH 3/4] hostapd: add eht_bw320_offset configuration option
Michael-CY Lee
michael-cy.lee at mediatek.com
Thu Dec 21 20:59:10 PST 2023
This patch introduces a new configuration option, "eht_bw320_offset",
which enables devices to specify a preferred channelization for 320 MHz
BSSs when using automatic channel selection (ACS).
This option is applicable only when the channel is not already decided
and the bandwidth is set to 320 MHz.
The value and meaning of the option:
0: auto-detected by ACS
1: 320 MHz-1
2: 320 MHz-2
Co-developed-by: Money Wang <money.wang at mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee at mediatek.com>
---
hostapd/config_file.c | 2 ++
hostapd/hostapd.conf | 8 ++++++++
src/ap/ap_config.c | 6 ++++++
src/ap/ap_config.h | 38 ++++++++++++++++++++++++++++++++++++++
src/ap/ctrl_iface_ap.c | 11 +++++++++++
src/ap/drv_callbacks.c | 2 ++
6 files changed, 67 insertions(+)
diff --git a/hostapd/config_file.c b/hostapd/config_file.c
index 1127d74f0..6d9b556fb 100644
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
@@ -4830,6 +4830,8 @@ static int hostapd_config_fill(struct hostapd_config *conf,
line);
return 1;
}
+ } else if (os_strcmp(buf, "eht_bw320_offset") == 0) {
+ conf->eht_bw320_offset = atoi(pos);
#endif /* CONFIG_IEEE80211BE */
} else {
wpa_printf(MSG_ERROR,
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index 8f6165a0b..9f3299c0c 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -1032,6 +1032,14 @@ wmm_ac_vo_acm=0
# 1 = PE field duration is 20 us
#eht_default_pe_duration=0
+#eht_bw320_offset: For automatic channel selection (ACS) to indicate a preferred
+# 320 MHz channelization in EHT mode.
+# If the channel is decided or the bandwidth is not 320 MHz, this option is meaningless.
+# 0 = auto-detect by hostapd
+# 1 = 320 MHz-1
+# 2 = 320 MHz-2
+#eht_bw320_offset=0
+
# Disabled subchannel bitmap (16 bits) as per IEEE P802.11be/3.0,
# Figure 9-1002c (EHT Operation Information field format). Each bit corresponds
# to a 20 MHz channel, the lowest bit corresponds to the lowest frequency. A
diff --git a/src/ap/ap_config.c b/src/ap/ap_config.c
index 2c66217e8..05303e791 100644
--- a/src/ap/ap_config.c
+++ b/src/ap/ap_config.c
@@ -295,6 +295,7 @@ struct hostapd_config * hostapd_config_defaults(void)
conf->airtime_update_interval = AIRTIME_DEFAULT_UPDATE_INTERVAL;
#endif /* CONFIG_AIRTIME_POLICY */
+ hostapd_set_and_check_bw320_offset(conf, 0);
return conf;
}
@@ -1505,6 +1506,7 @@ static int hostapd_config_check_cw(struct hostapd_config *conf, int queue)
int hostapd_config_check(struct hostapd_config *conf, int full_config)
{
size_t i;
+ u8 bw320_offset = 0;
if (full_config && is_6ghz_op_class(conf->op_class) &&
!conf->hw_mode_set) {
@@ -1556,6 +1558,8 @@ int hostapd_config_check(struct hostapd_config *conf, int full_config)
"Cannot set ieee80211be without ieee80211ax");
return -1;
}
+
+ bw320_offset = conf->eht_bw320_offset;
#endif /* CONFIG_IEEE80211BE */
if (full_config && conf->mbssid && !conf->ieee80211ax) {
@@ -1564,6 +1568,8 @@ int hostapd_config_check(struct hostapd_config *conf, int full_config)
return -1;
}
+ hostapd_set_and_check_bw320_offset(conf, bw320_offset);
+
for (i = 0; i < conf->num_bss; i++) {
if (hostapd_config_check_bss(conf->bss[i], conf, full_config))
return -1;
diff --git a/src/ap/ap_config.h b/src/ap/ap_config.h
index 0bc799d3e..69e42037a 100644
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
@@ -1174,6 +1174,7 @@ struct hostapd_config {
u16 punct_bitmap; /* a bitmap of disabled 20 MHz channels */
u8 punct_acs_threshold;
u8 eht_default_pe_duration;
+ u8 eht_bw320_offset;
#endif /* CONFIG_IEEE80211BE */
/* EHT enable/disable config from CHAN_SWITCH */
@@ -1274,6 +1275,43 @@ hostapd_set_oper_centr_freq_seg1_idx(struct hostapd_config *conf,
conf->vht_oper_centr_freq_seg1_idx = oper_centr_freq_seg1_idx;
}
+static inline u8
+hostapd_get_bw320_offset(struct hostapd_config *conf)
+{
+#ifdef CONFIG_IEEE80211BE
+ if (conf->ieee80211be && is_6ghz_op_class(conf->op_class) &&
+ hostapd_get_oper_chwidth(conf) == CONF_OPER_CHWIDTH_320MHZ)
+ return conf->eht_bw320_offset;
+#endif /* CONFIG_IEEE80211BE */
+ return 0;
+}
+
+static inline void
+hostapd_set_and_check_bw320_offset(struct hostapd_config *conf,
+ u8 bw320_offset)
+{
+#ifdef CONFIG_IEEE80211BE
+ if (conf->ieee80211be && is_6ghz_op_class(conf->op_class) &&
+ hostapd_get_oper_chwidth(conf) == CONF_OPER_CHWIDTH_320MHZ) {
+ if (conf->channel) {
+ /* If the channel is set, then calculate bw320_offset
+ * by center frequency segment 0.
+ */
+ u8 seg0 = hostapd_get_oper_centr_freq_seg0_idx(conf);
+ conf->eht_bw320_offset = (seg0 - 31) % 64 ? 2 : 1;
+ } else {
+ /* If the channel is not set, bw320_offset indicates
+ * preferred offset of 320 MHz.
+ */
+ conf->eht_bw320_offset = bw320_offset;
+ }
+ } else {
+ conf->eht_bw320_offset = 0;
+ }
+#endif /* CONFIG_IEEE80211BE */
+}
+
+#define IBF_DEFAULT_ENABLE 0
int hostapd_mac_comp(const void *a, const void *b);
struct hostapd_config * hostapd_config_defaults(void);
diff --git a/src/ap/ctrl_iface_ap.c b/src/ap/ctrl_iface_ap.c
index 32a5b8ecd..537867180 100644
--- a/src/ap/ctrl_iface_ap.c
+++ b/src/ap/ctrl_iface_ap.c
@@ -830,6 +830,17 @@ int hostapd_ctrl_iface_status(struct hostapd_data *hapd, char *buf,
if (os_snprintf_error(buflen - len, ret))
return len;
len += ret;
+
+ if (is_6ghz_op_class(iface->conf->op_class) &&
+ hostapd_get_oper_chwidth(iface->conf) ==
+ CONF_OPER_CHWIDTH_320MHZ) {
+ ret = os_snprintf(buf + len, buflen - len,
+ "eht_bw320_offset=%d\n",
+ iface->conf->eht_bw320_offset);
+ if (os_snprintf_error(buflen - len, ret))
+ return len;
+ len += ret;
+ }
}
#endif /* CONFIG_IEEE80211BE */
diff --git a/src/ap/drv_callbacks.c b/src/ap/drv_callbacks.c
index ace0ce3d7..210068a94 100644
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
@@ -1170,6 +1170,8 @@ void hostapd_event_ch_switch(struct hostapd_data *hapd, int freq, int ht,
hostapd_set_oper_chwidth(hapd->iconf, chwidth);
hostapd_set_oper_centr_freq_seg0_idx(hapd->iconf, seg0_idx);
hostapd_set_oper_centr_freq_seg1_idx(hapd->iconf, seg1_idx);
+ /* Auto-detect new bw320_offset */
+ hostapd_set_and_check_bw320_offset(hapd->iconf, 0);
#ifdef CONFIG_IEEE80211BE
hapd->iconf->punct_bitmap = punct_bitmap;
#endif /* CONFIG_IEEE80211BE */
--
2.25.1
More information about the Hostap
mailing list