hostapd conf 802.11ac QCA9984

Nassim Dahmani nassim at interactive-mobility.com
Fri Jul 7 01:18:03 PDT 2017


Sorry I didn't put the end of the conf file :

wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0

### TX queue parameters
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5

On Fri, Jul 7, 2017 at 10:16 AM, Nassim Dahmani
<nassim at interactive-mobility.com> wrote:
> Hi everyone,
>
> I am using a zcomax QCA9984 with candela driver to setup an access
> points, it works I don't have any problems but the best debit i can
> have is 22-24 Mo/s on one device which is really low when we know the
> theorical 1,7 Gb/s that the card can provide,
>
> Here is my current hostapd conf:
>
> ### hostapd configuration file
> interface=wlp1s0
> driver=nl80211
>
> ### IEEE 802.11
> ssid=test5g
> hw_mode=a
> channel=0
> max_num_sta=128
> auth_algs=1
>
> ### DFS
> country_code=FR
> ieee80211d=1
> #ieee80211h=1
>
> ### IEEE 802.11n
> ieee80211n=1
> ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]
>
> ### IEEE 802.11ac
> ieee80211ac=1
> vht_oper_chwidth=1
> vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1]
> vht_oper_centr_freq_seg0_idx=42
>
> ### IEEE 802.11i
> wpa=2
> wpa_key_mgmt=WPA-PSK
> wpa_passphrase=123456789
> rsn_pairwise=CCMP
>
> ### hostapd event logger
> logger_syslog=-1
> logger_syslog_level=2
> logger_stdout=-1
> logger_stdout_level=2
>
> ### WMM
> wmm_enabled=1
> uapsd_advertisement_enabled=1
> wmm_ac_bk_cwmin=4
> wmm_ac_bk_cwmax=10
> wmm_ac_bk_aifs=7
>
>
> Do you knwo how I can improve my conf to increase my debit? I am a
> newbie on this so if I forgot something please tell me i'll send it to
> you.
> Thanks for your help.
>
> Best Regards



More information about the Hostap mailing list