EAP Authentication failure on using hostap version 2.3-5.1.1

[justin.philip at borqs.com]

Hi Jouni,

Thank you for the quick feedback or this issue.
The issue got resolved on disabling "eap_server=1".

Regards
Justin


----- Original Message -----
From: Jouni Malinen <j at w1.fi>
To: justin.philip at borqs.com
Cc: "hostap at lists.infradead.org" <hostap at lists.infradead.org>
Sent: Friday, February 19, 2016 9:53 PM
Subject: Re: EAP Authentication failure on using hostap version 2.3-5.1.1

On Fri, Feb 19, 2016 at 04:17:12AM +0000, justin.philip at borqs.com wrote:

> I have setup hostap version 2.3-5.1.1 to do WPA-EAP authentication.

> Radius server configured and running on a machine. Radius server is tested to work fine when using a DLINK AP for EAP-PEAP, EAP-TLS.
> 
> When I try to use the hostap to start a EAP-PEAP/EAP-TLS, I am facing authentication failure:-
...

> Attaching the hostap configuration file and logs.

That hostapd.conf has invalid authentication configuration. It is trying
to enable both use of an external RADIUS authentication server
(auth_server_*) and use of the internal server (eap_server=1). You need
to remove one of those based on which option you want to use. Since
there was not a complete configuration of the internal server, I'd
assume eap_server=1 should be removed from the configuration.

-- 
Jouni Malinen                                            PGP id EFC895FA