Wifi Direct GO Negotiation
Thu May 15 09:25:23 PDT 2014
Sorry guys for my inexperience, but this thing are driving me mad.
Tell me if i'm wrong.Does the function at line 525 of the following link
void p2p_process_go_neg_req(struct p2p_data *p2p, const u8 *sa,
const u8 *data, size_t len, int rx_freq)
represent the processing (performed by Device2) of the GO negotiation request that Device1 sent Device2?
This function performs at line 687
which returns the highest GO intent between local GO intent and received one.If I'm not wrong, according to what Arend told me Device2 get local GO intent from wpa_supplicant configuration file. But I've found only one way to set the local GO intent and it is here :
at line 1387, into the function
int p2p_connect(struct p2p_data *p2p, const u8 *peer_addr,
enum p2p_wps_method wps_method,
int go_intent, const u8 *own_interface_addr,
unsigned int force_freq, int persistent_group,
const u8 *force_ssid, size_t force_ssid_len,
int pd_before_go_neg, unsigned int pref_freq, u16 oob_pw_id)
According to what specifications say, it is used to start a GO negotiation.So my question is, how can I set the local GO intent for Device2 without using p2p_connect() function?I would make it by means of an android application. Can I do this?
Thanks for your help.Andrea
> Date: Wed, 14 May 2014 10:21:56 -0700
> From: moon.linux at yahoo.com
> Subject: Re: Wifi Direct GO Negotiation
> To: arend at broadcom.com; andrea.chittano at hotmail.it
> CC: hostap at lists.shmoo.com
> Hi Arend,
> I agree with what you said regarding the AP.
> One more question: Any device with WPS capabilty can join a P2P network.
> -Anand Moon
> On Wednesday, May 14, 2014 2:56 PM, Arend van Spriel <arend at broadcom.com> wrote:
> On 14-05-14 05:03, Anand Moon wrote:
> > Hi All,
> > I would like to add new question to this thread.
> > If the AP has the capability to support p2p and wps, how will
> > these two devices communicate with the AP.
> > Will this AP become P2P group owner (P2P Go) and the other devices P2P Clients ?
> I am not sure whether this scenario makes sense. P2P typically involves
> two STAs. They may be connected to some AP, but if both are connected to
> the same AP there may be not so much need to setup a P2P connection.
> > I would like to know how to judge if the wireless interface supports P2P
> > is it with the "Supported interface modes" or "Supported RX frame types" ?
> > If the device support following p2p mode then how do we need to configure them.
> > Supported interface modes:
> > * IBSS
> > * managed
> > * AP * AP/VLAN
> > * monitor
> > * mesh point
> > * P2P-client
> > * P2P-GO
> > How do we configure these P2P modes for interface?
> > Please share your thoughts.
> Just use nl80211 API, ie. NL80211_CMD_SET_INTERFACE. wpa_supplicant is
> doing that in src/drivers/driver_nl80211.c
> > -Anand Moon
> > On Tuesday, May 13, 2014 6:31 PM, Arend van Spriel <arend at broadcom.com> wrote:
> > On 05/13/14 14:03, Andrea Chittano wrote:
> >> Hi, my name is Andrea.
> >> I'm working on WiFi Direct and I found a thread about it.
> >> I've some doubts about it.
> >> Let's suppose we have 2 devices. Let's call D1 and D2.
> >> Let's suppose D1 sends a request of connection to D2 (D1 doesn't known
> >> D2 so no persistent connection there exist).
> >> The first step that wpa_supplicant on D1 is to send a GO negotiation
> >> request containing, among all,GO intent (of D1).
> >> I want to understand how wpa_supplicant on D2 acquires the GO intent of
> >> D2 in order to compare it with whichone sent by D1.
> >> Can someone explain me this?
> > Both devices have their own go intent configuration in wpa_supplicant
> > configuration file. D2 sends own go intent value in the GO negotiation
> > response. The device with the highest GO intent will become GO.
> > Regards,
> > Arend
> >> Thanks,
> >> Andrea
> >> _______________________________________________
> >> HostAP mailing list
> >> HostAP at lists.shmoo.com
> >> http://lists.shmoo.com/mailman/listinfo/hostap
> > _______________________________________________
> > HostAP mailing list
> > HostAP at lists.shmoo.com
> > http://lists.shmoo.com/mailman/listinfo/hostap
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Hostap