Looking for error message

[sven falempin]

Using old version (6) i found out the channel must be set (really?)
The old version was not able to handle ath9k though
but now it's ok

Please increase verbosity in version 7 :)

2011/8/17 sven falempin <sven.falempin at gmail.com>

> Hello,
>
> I currently try to use hostapd (0.7.3) with an ath9k driver card.
> I have absolutely NO output from hostapd. It just leave.
> When i put something like channel=60 it does log an error.
> But any other (known good) configuration does not log error neither do
> anything.
> btw, CONFIG_NO_STDOUT_DEBUG=n, openssl statically linked
> *I was able to connect to a wifi hotspot*
>
> Why have i no feedback at all ?
>
> Here's the gettimeofday and leave (strace hostapd):
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0xb7823000
> read(3, "# grr\ninterface=wlan0\nwpa=1\nwpa_"..., 4096) = 149
> read(3, "", 4096)                       = 0
> close(3)                                = 0
> munmap(0xb7823000, 4096)                = 0
> gettimeofday({1313532734, 239087}, NULL) = 0
> exit_group(1)                           = ?
>
> Here's kernel version and hostapd version and iw list result
> root at zhost sbin> uname -r
> 2.6.39.2
> root at zvnhermes sbin> hostapd -v
> hostapd v0.7.3
> User space daemon for IEEE 802.11 AP management,
> IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
> Copyright (c) 2002-2010, Jouni Malinen <j at w1.fi> and contributors
> root at zhost sbin> ldd hostapd
>         linux-gate.so.1 =>  (0xb78a4000)
>         libdl.so.2 => /lib/libdl.so.2 (0xb789c000)
>         libnl.so.1 => /lib/libnl.so.1 (0xb7858000)
>         libc.so.6 => /lib/libc.so.6 (0xb7719000)
>         /lib/ld-linux.so.2 (0xb78a5000)
>         libm.so.6 => /lib/libm.so.6 (0xb76f1000)
> root at zhost sbin> ldd iw
>         linux-gate.so.1 =>  (0xb78b6000)
>         libnl.so.1 => /lib/libnl.so.1 (0xb786e000)
>         libc.so.6 => /lib/libc.so.6 (0xb772f000)
>         libm.so.6 => /lib/libm.so.6 (0xb7707000)
>         /lib/ld-linux.so.2 (0xb78b7000)
> root at zhost sbin>
> root at zhost sbin> iw list
> Wiphy phy0
>         Band 1:[WELLLLL]
>         Band 2:[BLABLA]
>         max # scan SSIDs: 4
>         max scan IEs length: 2257 bytes
>         Coverage class: 0 (up to 0m)
>         Available Antennas: TX 0 RX 0
>         Supported interface modes:
>                  * IBSS
>                  * managed
>                  * AP
>                  * AP/VLAN
>                  * WDS
>                  * monitor
>                  * P2P-client
>                  * P2P-GO
>         Supported commands:
>                  * new_interface
>                  * set_interface
>                  * new_key
>                  * new_beacon
>                  * new_station
>                  * set_bss
>                  * authenticate
>                  * associate
>                  * deauthenticate
>                  * disassociate
>                  * join_ibss
>                  * remain_on_channel
>                  * set_tx_bitrate_mask
>                  * action
>                  * frame_wait_cancel
>                  * set_wiphy_netns
>                  * set_channel
>                  * set_wds_peer
>                  * connect
>                  * disconnect
>         Supported TX frame types:
>                  * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060
> 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>                  * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>                  * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060
> 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>                  * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>                  * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>                  * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>                  * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060
> 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>         Supported RX frame types:
>                  * IBSS: 0x00d0
>                  * managed: 0x0040 0x00d0
>                  * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>                   * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0
> 0x00d0
>                  * mesh point: 0x00d0
>                  * P2P-client: 0x0040 0x00d0
>                  * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>
>


-- 
---------------------------------------------------------------------------------------------------------------------
() ascii ribbon campaign - against html e-mail
/\
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20110817/a5cf51f1/attachment.htm