WPA Supplicant - WPS function in madwifi
Tue Mar 31 01:12:01 PDT 2009
You need the madwifi 0.9.4 and Honma' patch, which you can find in this
2009/3/29 ?????? <marsyanggo at gmail.com>
> Dear all
> I am windows driver engineer in Taiwan. I had developed windows version
> WPS beofre.
> Now I am trying do some different WPS applicatin in home network. For the
> and research purpose, I do it in ubuntu 8.10 with atheros
> chipset(Madwifi). Now I have two platforms
> as AP and Nic(Client). I had verified the hostapd(AP Mode) is worked well
> in PIN and PBC with Intel and
> Realtek solution. I meet the porblems in wpa_supplicant(Ubuntu with
> wpa_supplicant 0.69). I config
> the .config and wpa_supplicant.cong file as REREADME. But as I use the
> active the wpa_supplcant and
> use the command "wpa_cli wps_pbc". The thread olny show setup WPS Info. And
> It keep on scan.
> Then I use "wpa_cli scan_resut" , it is not show the wps flag even if some
> APs indeed with the WPS IE.
> Most strange is that I even can't use wpa_supplcant to connect to the AP
> with set the correct security
> setting in wpa_supplicant.conf. But the ubuntu wlan UI work well. I
> summarize as below.
> 1. Does the Ubuntu wlan UI will effect the wpa_supplcaint. How to disable
> it. Or how to make wpa_supplicant take
> charge to EAP process.
> 2. Which version will be ok for WPS. Should I take 0.67 for experiment.
> 3. How to make the scan show the WPS .And make sure the wpa_supplicant.conf
> is work for WPS (Set phase1="pbc=1" ??)
> Thanks for your reading and help. I would like to help something about WPS
> when I used to Linux kernel and User space.
> Best regards
> HostAP mailing list
> HostAP at lists.shmoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Hostap