hostapd: did not acknowledge authentication/association response

Tim Connolly voyd
Sat Jun 14 02:10:20 PDT 2008


Kernel: latest rt2x00.git
Hostap: latest hostap.git
Test client: Windows XP Professional

When attempting to use WPA or WPA2 with nl80211 I get a continuous loop of 
the following output from hostapd as the client attempts to connect. Is 
this some way I might be able to resolve this problem?


STA 00:12:f0:76:03:b9 sent probe request for our SSID
STA 00:12:f0:76:03:b9 sent probe request for broadcast SSID
MGMT (TX callback) fail
mgmt::proberesp cb
MGMT (TX callback) fail
mgmt::proberesp cb
STA 00:12:f0:76:03:b9 sent probe request for our SSID
MGMT (TX callback) fail
mgmt::proberesp cb
MGMT
mgmt::auth
authentication: STA=00:12:f0:76:03:b9 auth_alg=0 auth_transaction=1 
status_code=0 wep=0
wlan0: STA 00:12:f0:76:03:b9 IEEE 802.11: authentication OK (open system)
wlan0: STA 00:12:f0:76:03:b9 WPA: event 0 notification
wlan0: STA 00:12:f0:76:03:b9 MLME: 
MLME-AUTHENTICATE.indication(00:12:f0:76:03:b9, OPEN_SYSTEM)
wlan0: STA 00:12:f0:76:03:b9 MLME: 
MLME-DELETEKEYS.request(00:12:f0:76:03:b9)
authentication reply: STA=00:12:f0:76:03:b9 auth_alg=0 auth_transaction=2 
resp=0 (IE len=0)
MGMT (TX callback) fail
mgmt::auth cb
wlan0: STA 00:12:f0:76:03:b9 IEEE 802.11: did not acknowledge 
authentication response
MGMT
mgmt::assoc_req
association request: STA=00:12:f0:76:03:b9 capab_info=0x411 
listen_interval=10
WME IE - hexdump(len=7): 00 50 f2 02 00 01 00
Validating WME IE: OUI 00:50:f2  OUI type 2  OUI sub-type 0  version 1
   old AID 1
wlan0: STA 00:12:f0:76:03:b9 IEEE 802.11: association OK (aid 1)
MGMT (TX callback) fail
mgmt::assoc_resp cb
wlan0: STA 00:12:f0:76:03:b9 IEEE 802.11: did not acknowledge association 
response
Sending disassociation info to STA 00:12:f0:76:03:b9
MGMT (TX callback) fail
unknown mgmt cb frame subtype 10




More information about the Hostap mailing list