pre-authentication problem

[Jouni Malinen]

On Fri, Nov 30, 2007 at 02:27:43PM +0100, IO te wrote:

> interface=ath0
> driver=madwifi

This ath0 would be interface from which the pre-auth packets are coming
from the STA.

> rsn_preauth_interfaces=eth0

And this eth0 would be the interface from which pre-auth packets are
coming from the other AP.

> The communication between the aps and the radius server use an
> ethernet interface (eth1), while eth0 is used for pre-authentication
> with the station.

Are ath0 and eth0 bridged together to allow the pre-auth messages to go
through the AP?

-- 
Jouni Malinen                                            PGP id EFC895FA