Diversity

Pablo Osuna posuna
Tue Nov 15 08:15:00 PST 2005


Hi all:

I have these three cards running with hostap:

2511CD Plus EXT 2 PCMCIA 200mW
NL-2511MP PLUS mini-PCI 200mW
Reliawave? 802.11b 300mW High Power Wireless PC Card - Prism 2.5

I am using them with default diversity parameters (antsel_tx=0 and
antsel_rx=0) but do not know if I should set these parameters up to
another one. In that case, how I should setup the wlan interface? I do
not know the difference between AntSel pin low/high.

Please any advice on this would be appreciated.

Thanks!

Pablo

        antsel_tx:
                0 = do not touch TX AntSel, i.e., use card default
(default)
                1 = use antenna diversity
                2 = force TX AntSel pin low
                3 = force TX AntSel pin high
        antsel_rx:
                0 = do not touch RX AntSel, i.e., use card default
(default)
                1 = use antenna diversity
                2 = force RX AntSel pin low
                3 = force RX AntSel pin high





More information about the Hostap mailing list