wired wpa_supplicant-windows-bin-0.4.1

[GoldWater]

Dear Jouni:

Sure, I will try my best to complete the job, please send me the
source, but I need to purchase a pair of wireless cards to fulfill the
progress of my project first.
Whether purchase any brand of 802.11b/g card which have a Prism2/2.5/3
chipset must suitable to doing EAP/TLS between hostapd and
wpa_supplicant_windows?

goldwater716 at gmail.com

Best Regards,

Wai Lun

On 6/1/05, Jouni Malinen <jkmaline at cc.hut.fi> wrote:
> On Wed, Jun 01, 2005 at 02:52:16AM +0800, GoldWater wrote:
> 
> > - I extracted wpa_supplicant-windows-bin-0.4.1 in a winXP (without SP1a),
> 
> > ifname: \Device\NPF_{3E94358E-F7E1-4DEE-AF8E-34A92F8B084B}
> > description: Intel(R) PRO Adapter (Microsoft's Packet Scheduler)
> 
> > -After keyin "wpa_supplicant -iIntel -c wpa_supplicant.conf -d", I alway get:
> >
> > Trying to associate with SSID 'example'
> > Association request to the driver failed
> 
> > do you kindly to tell me, can I use wired Lan card to connect Hostapd?
> 
> The current Windows binary does not support wired network adapters. It
> is only built with driver_ndis.c which is trying to configure wireless
> OIDs that are not supported by wired Ethernet drivers.
> 
> I haven't tested this, but in theory, driver_wired.c might work on
> Windows. However, this would require making a new build. If you are
> willing to test something experimental and report the results, please
> let me know and I should be able to make you a test binary of
> wpa_supplicant with driver_wired.c built for Windows. Of course, you can
> also build one yourself, if you have a build environment for Windows.
> 
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>