Madwifi along with WPA-PSK

joseph_chen chenifang
Tue Feb 1 00:10:01 PST 2005


Hi:
I read your replay again, and I found .....
Maybe you misunderstand my problem, or I make the wrong statement about it
:-)
Actually, I want to know one thing, based on your description, whether you
can successfully use your WG511T with hostapd to act as AP (authenticator).
And then you can use another wlan card (a supplicant) to connect the AP that
you just set up using WPA-PSK.

 DLink604T is not required in this dicussion.

  joseph


----- Original Message -----
From: "Nigel Cunningham" <ncunningham at linuxmail.org>
To: "joseph_chen" <chenifang at giga.net.tw>
Cc: <hostap at shmoo.com>
Sent: Tuesday, February 01, 2005 10:38 AM
Subject: Re: Madwifi along with WPA-PSK


> Hi.
>
> I only know about using it under pure Linux, I'm afraid. Can't help you
> with a windows client.
>
> Regards,
>
> Nigel
>
> On Tue, 2005-02-01 at 12:04, joseph_chen wrote:
> > at first , than you for your response!
> > I just wonder whether I have to use wpa_supplicant to be the supplicant.
> > if the  supplicant is windows client, is it still OK about WPA-PSK?
> >
> >
> > Joseph
> >
> > ----- Original Message -----
> > From: "Nigel Cunningham" <ncunningham at linuxmail.org>
> > To: "joseph_chen" <chenifang at giga.net.tw>
> > Cc: <hostap at shmoo.com>
> > Sent: Tuesday, February 01, 2005 5:40 AM
> > Subject: Re: Madwifi along with WPA-PSK
> >
> >
> > > Hi.
> > >
> > > Yes. You need to get the wpa_supplicant, but it is possible:
> > >
> > > /sbin/ifconfig ath0 up
> > > /sbin/iwconfig ath0 channel 1
> > > /usr/bin/wpa_supplicant -c/etc/wpa_supplicant.conf -Dmadwifi -iath0 -B
> > >
> > > Does it for me (with the appropriate things in the conf). I had less
> > > success trying with channel != 1.
> > >
> > > Netgear WG511T talking to DLink604T.
> > >
> > > Regards,
> > >
> > > Nigel
> > >
> > > On Mon, 2005-01-31 at 20:54, joseph_chen wrote:
> > > > Hi ~ hotstapd guy
> > > >
> > > > Has anyone successfully test Madwifi with hostapd to act an as
> > > > authenticator ? Is WPA-PSK workable ?
> > > >
> > > >
> > > > Joseph
> > > >
> > > >
> > > >
> > > >
______________________________________________________________________
> > > > _______________________________________________
> > > > HostAP mailing list
> > > > HostAP at shmoo.com
> > > > http://lists.shmoo.com/mailman/listinfo/hostap
> > > --
> > > Nigel Cunningham
> > > Software Engineer, Canberra, Australia
> > > http://www.cyclades.com
> > >
> > > Ph: +61 (2) 6292 8028      Mob: +61 (417) 100 574
> > >
> --
> Nigel Cunningham
> Software Engineer, Canberra, Australia
> http://www.cyclades.com
>
> Ph: +61 (2) 6292 8028      Mob: +61 (417) 100 574
>





More information about the Hostap mailing list