problem with madwifi drivers

[Oscar p]

Hi YenJung

Sorry but where shall I insert them?

BR/ Oscar

>From: YenJung Chang <yenjung at gmail.com>
>Reply-To: YenJung Chang <yenjung at gmail.com>
>To: pepe perez <reeopp at hotmail.com>
>CC: hostap at shmoo.com
>Subject: Re: problem with madwifi drivers
>Date: Fri, 26 Nov 2004 17:12:44 +0800
>
>OK....
>I guess you just inserted wlan.o, ath_hal.o and ath_pci.o modules, right?
>
>Please also insert wlan_wep.o wlan_tkip.o and wlan_ccmp.o, those are
>all in net80211 directory.
>
>yj.
>
>
>On Thu, 25 Nov 2004 15:21:46 +0100, pepe perez <reeopp at hotmail.com> wrote:
> > Hi YenJung!
> > I think I already tried it, anyway I have just tried again and not so 
>much
> > difference:
> >
> > dhcppc0:~ # wpa_supplicant -iath0 -c/etc/wpa_supplicant.conf -d
> > Configuration file '/etc/wpa_supplicant.conf' -> 
>'/etc/wpa_supplicant.conf'
> > Reading configuration file '/etc/wpa_supplicant.conf'
> > ctrl_interface='/var/run/wpa_supplicant'
> > ctrl_interface_group=0
> > eapol_version=1
> > ap_scan=1
> > Priority group 1
> >    id=0 ssid='OSCARLAN'
> > Using existing control interface directory.
> > EAPOL: SUPP_PAE entering state DISCONNECTED
> > EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> > EAPOL: SUPP_BE entering state INITIALIZE
> > EAP: EAP entering state DISABLED
> > EAPOL: External notification - portEnabled=0
> > EAPOL: External notification - portValid=0
> > wpa_driver_madwifi_set_wpa: enabled=1
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > Failed to enable WPA in the driver.
> > wpa_driver_madwifi_set_wpa: enabled=0
> > ioctl[IEEE80211_IOCTL_SETOPTIE]: Operation not supported
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > Failed to disable WPA in the driver.
> > wpa_driver_madwifi_set_drop_unencrypted: enabled=0
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > wpa_driver_madwifi_set_countermeasures: enabled=0
> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > Control interface directory not empty - leaving it behind
> >
> > It looks like something else is going on, meybe in configuration or
> > compilation....
> >
> > Thanks a lot for your help!!!
> > Oscar
> >
> > >From: YenJung Chang <yenjung at gmail.com>
> > >Reply-To: YenJung Chang <yenjung at gmail.com>
> > >To: pepe perez <reeopp at hotmail.com>
> > >CC: hostap at shmoo.com
> > >Subject: Re: problem with madwifi drivers
> > >Date: Thu, 25 Nov 2004 21:20:22 +0800
> > >
> > >AFAIK, the interface name of madwifi is "ath0", hence, the interface
> > >in your command should be -iath0, not -iwlan0.
> > >
> > >yj.
> > >
> > >
> > >
> >
> > _________________________________________________________________
> > Don't just search. Find. Check out the new MSN Search!
> > http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> >
> >

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/