DWL-650 REVP Working... But Problems!!

Kalyan Chintalapati kchinta
Mon Feb 16 12:06:50 PST 2004


Gurus,

I'm on cloud 9. num_users_with_working_hostap++; Thank You all of you who
have helped. Especially Pavel and Jouni, thank you very much!

The driver installed good and after downloading the firmware, I could even
tcpdump to see if it was working. And yes it is.

But, the problem now is when I did the above said things, I also had my
laptop connected to the ethernet, so getting an IP wasn't a problem ( I
guess! ).

But, when I try to connect to the Wireless Access Point (without the
ethernet), I'm unable to get onto the network.

Also, when I try to download firmware now, I get the following output:

wlan0
srec summary for pm010102.hex
Included file name: PM010102.HEX
Component: 0x0015 1.1.2 (primary firmware)


Verifying update compatibility and combining data:
Plugging PDR 0400 (NIC configuration): ram16=1 pci=0 (03 00)
OK.

Downloading to volatile memory (RAM).
OK.
srec summary for pm010102.hex
Included file name: PM010102.HEX
Component: 0x0015 1.1.2 (primary firmware)

ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
STAID not available (maybe running PRI-only)
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available

Verifying update compatibility and combining data:
Plug record length mismatch (PDR=0x0001): 6 != 16
==> extend from default
OK.

Downloading to volatile memory (RAM).
OK.
srec summary for rf010800.hex
Included file name: RF010800.hex
Component: 0x001f 1.8.0 (station firmware)

ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
STAID not available (maybe running PRI-only)
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available

Verifying update compatibility and combining data:
Could not find data position for plugging PDR 0x0413 at 0x0000118e (len=2)
PDR 0x0413 is not in wlan card PDA and there is no default data. Ignoring
plug r                                             ecord.
OK.

Downloading to volatile memory (RAM).
OK.
Components after download:
  NICID: 0x801d v1.0.0
  PRIID: 0x0015 v1.1.2
  STAID: 0x001f v1.8.0

The output from "dmesg" is:

hostap_crypt: unregistered algorithm 'WEP'
hostap_crypt: unregistered algorithm 'NULL' (deinit)
hostap_crypt: registered algorithm 'NULL'
hostap_cs: CVS (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0047, io.base=0x0000, len=128
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0200-0x027f
prism2_hw_init: initialized in 39 ms
wifi0: NIC: id=0x801d v1.0.0
wifi0: PRI: id=0x15 v1.1.2
wifi0: STA: id=0x1f v1.8.0
wifi0: registered netdevice wlan0
wifi0: Deauthenticate all stations
hostap_cs: Driver unloaded
hostap_crypt: unregistered algorithm 'NULL' (deinit)
hostap_crypt: registered algorithm 'NULL'
hostap_cs: CVS (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0047, io.base=0x0000, len=128
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0200-0x027f
hostap_cs: assuming no Primary image in flash - card initialization not
completed
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 ce a1 ce
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
wifi0: registered netdevice wlan0
wifi0: cannot get RID fdc6 (len=12) - no PRI f/w
wifi0: cannot get RID fdc6 (len=12) - no PRI f/w
wifi0: cannot get RID fdc1 (len=2) - no PRI f/w
wifi0: cannot get RID fc06 (len=2) - no PRI f/w
wifi0: cannot get RID fd42 (len=6) - no PRI f/w
wifi0: cannot get RID fc0e (len=34) - no PRI f/w
wifi0: cannot get RID fc84 (len=2) - no PRI f/w
wifi0: cannot get RID fc83 (len=2) - no PRI f/w
wifi0: cannot get RID fc82 (len=2) - no PRI f/w
wifi0: cannot get RID fc09 (len=2) - no PRI f/w
wifi0: cannot get RID fd48 (len=2) - no PRI f/w
wlan0: cannot get RID fdc6 (len=12) - no PRI f/w
wlan0: cannot get RID fdc6 (len=12) - no PRI f/w
wlan0: cannot get RID fdc1 (len=2) - no PRI f/w
wlan0: cannot get RID fc06 (len=2) - no PRI f/w
wlan0: cannot get RID fd42 (len=6) - no PRI f/w
wlan0: cannot get RID fc0e (len=34) - no PRI f/w
wlan0: cannot get RID fc84 (len=2) - no PRI f/w
wlan0: cannot get RID fc83 (len=2) - no PRI f/w
wlan0: cannot get RID fc82 (len=2) - no PRI f/w
wlan0: cannot get RID fc09 (len=2) - no PRI f/w
wlan0: cannot get RID fd48 (len=2) - no PRI f/w
wlan0 unsupported ioctl(0x89f1)
prism2: wlan0: operating mode changed 3 -> 2
wlan0: cannot set RID fc00 (len=2) - no PRI f/w
wlan0: cannot set RID fc0e (len=34) - no PRI f/w
hostap_crypt: registered algorithm 'WEP'
wifi0: cannot get RID fc28 (len=2) - no PRI f/w
Could not read current WEP flags.
wifi0: encryption setup failed
wlan0: set_encryption failed
wlan0: cannot set RID fc02 (len=34) - no PRI f/w
wifi0: cannot get RID fdc6 (len=12) - no PRI f/w
wifi0: cannot get RID fdc6 (len=12) - no PRI f/w
wifi0: cannot get RID fdc1 (len=2) - no PRI f/w
wifi0: cannot get RID fc06 (len=2) - no PRI f/w
wifi0: cannot get RID fc28 (len=2) - no PRI f/w
CNFWEPFLAGS reading failed
wifi0: cannot get RID fd41 (len=34) - no PRI f/w
wifi0: cannot get RID fd42 (len=6) - no PRI f/w
wifi0: cannot get RID fc0e (len=34) - no PRI f/w
wifi0: cannot get RID fc84 (len=2) - no PRI f/w
wifi0: cannot get RID fc83 (len=2) - no PRI f/w
wifi0: cannot get RID fc82 (len=2) - no PRI f/w
wifi0: cannot get RID fc09 (len=2) - no PRI f/w
wifi0: cannot get RID fd48 (len=2) - no PRI f/w
wlan0: cannot get RID fdc6 (len=12) - no PRI f/w
wlan0: cannot get RID fdc6 (len=12) - no PRI f/w
wlan0: cannot get RID fdc1 (len=2) - no PRI f/w
wlan0: cannot get RID fc06 (len=2) - no PRI f/w
wlan0: cannot get RID fc28 (len=2) - no PRI f/w
CNFWEPFLAGS reading failed
wlan0: cannot get RID fd41 (len=34) - no PRI f/w
wlan0: cannot get RID fd42 (len=6) - no PRI f/w
wlan0: cannot get RID fc0e (len=34) - no PRI f/w
wlan0: cannot get RID fc84 (len=2) - no PRI f/w
wlan0: cannot get RID fc83 (len=2) - no PRI f/w
wlan0: cannot get RID fc82 (len=2) - no PRI f/w
wlan0: cannot get RID fc09 (len=2) - no PRI f/w
wlan0: cannot get RID fd48 (len=2) - no PRI f/w
wifi0: cannot get RID fdc6 (len=12) - no PRI f/w
wifi0: cannot get RID fdc6 (len=12) - no PRI f/w
wifi0: cannot get RID fdc1 (len=2) - no PRI f/w
wifi0: cannot get RID fc06 (len=2) - no PRI f/w
wifi0: cannot get RID fc28 (len=2) - no PRI f/w
CNFWEPFLAGS reading failed
wifi0: cannot get RID fd41 (len=34) - no PRI f/w
wifi0: cannot get RID fd42 (len=6) - no PRI f/w
wifi0: cannot get RID fc0e (len=34) - no PRI f/w
wifi0: cannot get RID fc84 (len=2) - no PRI f/w
wifi0: cannot get RID fc83 (len=2) - no PRI f/w
wifi0: cannot get RID fc82 (len=2) - no PRI f/w
wifi0: cannot get RID fc09 (len=2) - no PRI f/w
wifi0: cannot get RID fd48 (len=2) - no PRI f/w
wlan0: cannot get RID fdc6 (len=12) - no PRI f/w
wlan0: cannot get RID fdc6 (len=12) - no PRI f/w
wlan0: cannot get RID fdc1 (len=2) - no PRI f/w
wlan0: cannot get RID fc06 (len=2) - no PRI f/w
wlan0: cannot get RID fc28 (len=2) - no PRI f/w
CNFWEPFLAGS reading failed
wlan0: cannot get RID fd41 (len=34) - no PRI f/w
wlan0: cannot get RID fd42 (len=6) - no PRI f/w
wlan0: cannot get RID fc0e (len=34) - no PRI f/w
wlan0: cannot get RID fc84 (len=2) - no PRI f/w
wlan0: cannot get RID fc83 (len=2) - no PRI f/w
wlan0: cannot get RID fc82 (len=2) - no PRI f/w
wlan0: cannot get RID fc09 (len=2) - no PRI f/w
wlan0: cannot get RID fd48 (len=2) - no PRI f/w
wifi0: hfa384x_cmd: entry still in list? (entry=c89cfee0, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c89cfee0,
type=0, cmd=0x0002, param0=0x0000, EVSTAT=0000 INTEN=0010)
hostap_cs: Shutdown failed
hostap_cs: Driver unloaded
hostap_crypt: unregistered algorithm 'WEP'
hostap_crypt: unregistered algorithm 'NULL' (deinit)
hostap_crypt: registered algorithm 'NULL'
hostap_cs: CVS (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0047, io.base=0x0000, len=128
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0200-0x027f
wifi0: __hfa384x_cmd_no_wait(6) - timeout - reg=0x8a32
hostap_cs: first command failed - assuming card does not have primary
firmware
hostap_cs: assuming no Primary image in flash - card initialization not
completed
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 ce a1 ce
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
wifi0: registered netdevice wlan0
hostap_crypt: registered algorithm 'WEP'
prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
prism2_hw_init: initialized in 20 ms
wifi0: NIC: id=0x8000 v0.0.1
wifi0: PRI: id=0x15 v1.1.2
Could not get RID for component STA
wifi0: Failed to read STA f/w version - only Primary f/w present
prism2_download: dl_cmd=6 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
prism2_hw_init: initialized in 11 ms
wifi0: NIC: id=0x801d v1.0.0
wifi0: PRI: id=0x15 v1.1.2
Could not get RID for component STA
wifi0: Failed to read STA f/w version - only Primary f/w present
prism2_download: dl_cmd=5 start_addr=0x003f0c01 num_areas=3
prism2_hw_init: initialized in 27 ms
wifi0: NIC: id=0x801d v1.0.0
wifi0: PRI: id=0x15 v1.1.2
wifi0: STA: id=0x1f v1.8.0
prism2: wlan0: operating mode changed 3 -> 2
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=00:0d:88:51:5a:da
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
   A1=44:44:44:44:44:44 A2=00:0d:88:51:5a:da A3=ff:ff:ff:ff:ff:ff
A4=00:00:00:00:00:00
wifi0: LinkStatus=1 (Connected)
wifi0: LinkStatus: BSSID=00:40:96:53:18:d0
wlan0 unsupported ioctl(0x89f1)
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=00:40:96:53:18:d0
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
   A1=44:44:44:44:44:44 A2=00:0d:88:51:5a:da A3=33:33:00:00:00:02
A4=00:00:00:00:00:00
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
   A1=44:44:44:44:44:44 A2=00:0d:88:51:5a:da A3=33:33:00:00:00:02
A4=00:00:00:00:00:00
wlan0: no IPv6 routers present
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
   A1=44:44:44:44:44:44 A2=00:0d:88:51:5a:da A3=00:d0:00:8c:9b:fc
A4=00:00:00:00:00:00
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
   A1=44:44:44:44:44:44 A2=00:0d:88:51:5a:da A3=00:d0:00:8c:9b:fc
A4=00:00:00:00:00:00

So, what should I do now ?

Thanks in advance,
-Kalyan






More information about the Hostap mailing list