(almost working!) Problems with wpa_supplicant and Linksys WPC54G + WPA EAP-TTLS

Dan Parsons dparsons
Mon Dec 20 18:45:10 PST 2004


Sorry, what I actually put in the file was: phase2="auth=PAP"

Dan Parsons
Systems Administrator
Pioneer Research Center USA, Inc.

On Dec 20, 2004, at 6:34 PM, Jouni Malinen wrote:

> On Mon, Dec 20, 2004 at 03:18:39PM -0800, Dan Parsons wrote:
>> Nevermind, I made it work! The last trick was making phase2 have just
>> autheap=PAP
>
> Nice to hear that you got it working, but please note that
> phase2="autheap=PAP" is an invalid configuration since there is no EAP
> method called PAP. auth=PAP would be valid, but may not be what you 
> want
> if you get this working with autheap=PAP which, in practice, should be
> identical to leaving out the phase2 variable completely. This accepts
> all suitable EAP methods in the Phase2 authentication. If "autheap=PAP
> autheap=MD5" (which is actually same as autheap=MD5) did not work, it
> sounds like the Phase2 is using EAP-MSCHAPv2 or EAP-GTC.
>
> -- 
> Jouni Malinen                                            PGP id 
> EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap





More information about the Hostap mailing list