Fri Aug 27 21:25:03 PDT 2004
On Wednesday 25 August 2004 14:47, Jouni Malinen wrote:
> On Wed, Aug 25, 2004 at 01:40:18AM +0000, Steffen Schwientek wrote:
> > I have flashed my card with the prism2_srec programm. Unfortunately
> > something has gone wrong.
> > My command was
> > ./prism2_srec wlan0 -f pk010101.hex
> You seemed to have only updated primary firmware, which will disable the
> secondary firmware.
> > Here is the output of
> > bash-2.05b# ./hostap_diag wifi0
> > Host AP driver diagnostics information for 'wifi0'
> > NICID: id=0x801b v1.0.0 (PRISM III PCMCIA (SST parallel flash))
> > PRIID: id=0x0015 v1.1.1
> > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> You will need to upgrade station firmware to get the card in fully
> operational state.
Unfortunately that?s not possible for me. If I trie it on the wlan interface,
it tellsbash-2.05b# ./prism2_srec -g wlan0 /home/steffen/Desktop/rf010800.hex
srec summary for rf010800.hex
Included file name: RF010800.hex
Component: 0x001f 1.8.0 (station firmware)
ioctl[PRISM2_IOCTL_HOSTAPD]: No such device
Missing wlan component info
Could not read wlan RIDs
More information about the Hostap