Problems with Prism3 NIC 801D

Martin Whitlock martin.whitlock
Mon Oct 6 09:23:31 PDT 2003


I have a new Prism3 SENAO (NL-2511 Mercury) card with NIC ID 801D and 
experience problems when modprobing cvs version of hostap. It starts 
with "<4>wlan0: hfa384x_cmd - timeout - reg=0xbe00" followed by other 
unsuccessful hfa382x commands... See attached log for more info. Any 
ideas? Has anything changed between NIC 801B and 801D messing things up 
for hostap?

/Martin

_____________________________

[pxadmin at Linux /root]$modprobe hostap_cs
hostap_cs: CVS (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: index 0x01: Vcc 3.3, irq 153, io 0xf6000000-0xf600007f
hostap_cs: Registered netdevice wlan0
wlan0: hfa384x_cmd - timeout - reg=0xbe00
hostap_cs: first command failed - is the card compatible?
[pxadmin at Linux /root]$cat /proc/kmsg
<7>hostap_crypt: registered algorithm 'NULL'
<6>hostap_cs: CVS (Jouni Malinen <jkmaline at cc.hut.fi>)
<7>hostap_cs: setting Vcc=33 (constant)
<7>hostap_cs: CS_EVENT_CARD_INSERTION
<7>hostap_cs: setting Vcc=33 (from config)
<7>Checking CFTABLE_ENTRY 0x01 (default 0x01)
<7>IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
<7>io->flags = 0x0047, io.base=0x0000, len=128
<6>hostap_cs: index 0x01: Vcc 3.3, irq 153, io 0xf6000000-0xf600007f
<6>hostap_cs: Registered netdevice wlan0
<4>wlan0: hfa384x_cmd - timeout - reg=0xbe00
<4>hostap_cs: first command failed - is the card compatible?
<7>wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
<7>wlan0: hfa384x_cmd_issue - timeout - reg=0xbe00
<7>wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
<7>wlan0: hfa384x_cmd_issue - timeout - reg=0xbe00
<7>wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
<7>wlan0: hfa384x_cmd_issue - timeout - reg=0xbe00

[pxadmin at Linux /root]$

[pxadmin at Linux /root]$iwconfig wlan0
Warning : Device wlan0 has been compiled with version 13
of Wireless Extension, while we are using version 11.
Some things may be broken...

wlan0     IEEE 802.11-DS  ESSID:"test"
          Mode:Master
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

[pxadmin at Linux /root]$


[pxadmin at Linux /root]$hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'

ioctl[PRISM2_IOCTL_HOSTAPD]: Connection timed out
Could not communicate with the kernel driver.
[pxadmin at Linux /root]$





More information about the Hostap mailing list