wlan0: driver bug - prism2_transmit() called when previous TX was pending

[Doug Yeager]

More data on this error:
 
I'm using the latest cvs now and I've also upgraded to the latest 1.7.4
firmware.
I'm getting the same error. And an eventual failure to initialize.
 
This ONLY happens w/ one of my client cards though, (the dwl-650+) is
the culprit.  The other client cards all seem to play nicely w/ the AP.
The AP is a soekris 4511 (133 mhz)  w/ a senao 200 mw card.
 
What file should I look in to start playing w/ this particular code.?
 
Here are the error messages again:
 
 
wlan0: 00:80:c8:b6:ee:af auth_cb - STA authenticated
wlan0: 00:80:c8:b6:ee:af assoc_cb - STA associated
wlan0: driver bug - prism2_transmit() called when previous TX was
pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_init: initialized in 19183 iterations
wlan0: prism2_tx: hw not ready - skipping
wlan0: prism2_tx: hw not ready - skipping
wlan0: prism2_tx: hw not ready - skipping
wlan0: prism2_tx: hw not ready - skipping
wlan0: 00:80:c8:b6:ee:af auth_cb - STA authenticated
wlan0: 00:80:c8:b6:ee:af assoc_cb - STA associated
wlan0: driver bug - prism2_transmit() called when previous TX was
pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
wlan0: prism2_tx: hw not ready - skipping
prism2_hw_init: initialized in 19170 iterations
wlan0: prism2_tx: hw not ready - skipping
wlan0: prism2_tx: hw not ready - skipping
wlan0: prism2_tx: hw not ready - skipping
wlan0: prism2_tx: hw not ready - skipping
wlan0: STA 00:80:c8:b6:ee:af TX rate lowered to 55
wlan0: 00:80:c8:b6:ee:af auth_cb - STA authenticated
wlan0: 00:80:c8:b6:ee:af assoc_cb - STA associated
wlan0: STA 00:02:6f:03:fe:a4 did not ACK activity poll frame
wlan0: sending disassociation info to STA 00:02:6f:03:fe:a4(last=26399,
jiffies=56499)
wlan0: STA 00:02:6f:03:fe:a4 TX rate lowered to 55
wlan0: sending deauthentication info to STA
00:02:6f:03:fe:a4(last=26399, jiffies=56599)
wlan0: Could not find STA for this TX error
wlan0: driver bug - prism2_transmit() called when previous TX was
pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_init: initialized in 19181 iterations
wlan0: driver bug - prism2_transmit() called when previous TX was
pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_init: initialized in 19184 iterations
wlan0: 00:80:c8:b6:ee:af auth_cb - STA authenticated
wlan0: 00:80:c8:b6:ee:af assoc_cb - STA associated
wlan0: driver bug - prism2_transmit() called when previous TX was
pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_init: initialized in 19186 iterations
wlan0: driver bug - prism2_transmit() called when previous TX was
pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
wlan0: prism2_tx: hw not ready - skipping
wlan0: Command completion event, but no pending commands
wlan0: prism2_tx: hw not ready - skipping
hostap_cs: card initialization timed out
hostap_cs: Initialization failed
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20030724/5631a28e/attachment.htm