Senao 2511 CD - Flash Primary & Secondary - Problems

Jay Zhang jzh
Thu Jul 17 12:36:35 PDT 2003


I had similar error from Winupdate with my Linksys WPC11 v3 (Prism 3).
nicid: 0x801b v1.0.0
priid: 0x15 v1.1.0
staid: 0x15 v1.4.2

Winupdate reports error, and if I continue, it will corrupt the firmware.

Turn off the "download" option in Windows driver will help Winupdate to 
detect the right firmware version.
( Intersil FAQ Answer ID 4122
http://www.intersil.com/rnwscripts/custfaq.cfg/php.exe/enduser/std_adp.php?p_sid=xKjz22Og&p_lva=3803&p_faqid=4122&p_created=1024513499&p_sp=cF9zcmNoPTEmcF9ncmlkc29ydD0mcF9yb3dfY250PTEzMCZwX3NlYXJjaF90ZXh0PWZpcm13YXJlJnBfc2VhcmNoX3R5cGU9MyZwX3Byb2RfbHZsMT03JnBfcHJvZF9sdmwyPX5hbnl_JnBfc29ydF9ieT1kZmx0JnBfcGFnZT0x&p_li= 
)

But I still got errors. Even the DOS based tool 0.3e doesn't work for 
me( http://www.hawkingtech.com/download/we110.exe ) .

The DOS tool v0.5 (http://home.eunet.cz/jt/wifi/ )
is the only tool that can updates my card (with option -3842)


You may have to try them by yourself.

Bobby Sardana wrote:
> Greetings all,
> 
> I have read the document:
> 
> http://linux.junsun.net/intersil-prism
> 
> and am flashing firmaware of Senao 2511 CD:
> 
> NIC: id=0x800c v1.0.0
> PRI: id=0x15   v1.1.0
> STA: id=0x1f   v1.4.9
> 
> to:
> 
> Primary:    1.1.1 (PK010101.hex)
> Secondary:  1.7.4 (SF010704.hex)
> 
> using the WinUpdate utility (0.7.0). I am able to add both the firmware 
> files in WinUpdate and it finds the right driver. However, when I click 
> on continue, and during the writing phase, the following error is 
> displayed by WinUpdate:
> 
> "Error Programming Block. Continue anyway?"
> 
> I selected "No" to stop the update. Any clues why this is happening?
> 
> Thank you.
> 
> with regards,
> 
> Bobby Sardana.
> sardana at obsoft.com
> 
> 
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 
> 





More information about the Hostap mailing list