Format firmware

[Piotr Dąbrowski]

Hi!



I'm trying to repair my Compaq WL100 card with erased CIS part of firmware.
To do this, I need a file with dump of hole firmware from working card. This
dump should be done by WinUpdate program (I know, that it works).
Unfortunately, I only have dumpfile done by flash.exe program (DOS) and it's
format differ from dumpfile done by WinUpdate.



WinUpdate dumpfile looks like this:



S315007E0000006490FF00F720FE006491FF01F720FE5A

S315007E0010006492FF02F720FE006493FF03F720FE42

S315007E0020006494FF04F720FE006495FF05F720FE2A

S315007E0030006496FF06F720FE006497FF0A043044AC

etc.



And flash.exe dump file looks like this:



3e0000: 6400,ff90,f720,fe20,6400,ff91,f721,fe20

3e0010: 6400,ff92,f722,fe20,6400,ff93,f723,fe20

3e0020: 6400,ff94,f724,fe20,6400,ff95,f725,fe20

3e0030: 6400,ff96,f726,fe20,6400,ff97,0403,6084

3e0040: 781f,ffff,6084,7826,ffff,ffff,ffff,ffff

3e0050: ffff,ffff,ffff,ffff,ffff,ffff,ffff,ffff

3e0060: ffff,ffff,ffff,ffff,ffff,ffff,ffff,ffff

etc.



I have a question: is there any chance to change format of flash.exe file to

WinUpdate file format?



Thank You in advance!
Best, best, regards
Piotr Dabrowski

Ps. Sorry for my poor english