card not working any longer with hostap driver

Praedor Atrebates praedor
Fri Feb 28 11:25:18 PST 2003


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I have Mandrake 9.0 installed on my laptop, kernels 2.4.19 and 2.4.21 (the 9.1 
release candidate kernel), and neither works in combination with hostap cvs 
and my prism2-based Zoomair pcmcia card.  

Under Mandrake 8.3, kernel-2.4.18, I had it working.  No hardware has changed. 
Iwconfig doesn't work - trying to set anything on the card produces errors:

# iwconfig wlan0 mode master
Error for wireless request "Set Mode" (8B06) :
  SET failed on device wlan0 ; Operation not supported.

Sorry?  I have the latest wireless tools for my system, the latest kernel.  I 
just built (4 days ago) the cvs version of hostap so it is essentially 
up-to-date.  They should ALL be talking the same 
wireless-tools/wireless-extensions language but they don't appear to.

What I get whenever the card is inserted is this in my syslogs:

Feb 28 13:59:41 lapdog kernel: hostap_cs: index 0x01: Vcc 5.0, irq 3, io 
0x0100-0x013f
Feb 28 13:59:41 lapdog kernel: hostap_cs: Registered netdevice wlan0
Feb 28 13:59:41 lapdog kernel: prism2_hw_init()
Feb 28 13:59:41 lapdog kernel: prism2_hw_config: initialized in 9219 
iterations
Feb 28 13:59:41 lapdog kernel: wlan0: NIC: id=0x8003 v1.0.0
Feb 28 13:59:41 lapdog kernel: wlan0: PRI: id=0x15 v0.3.0
Feb 28 13:59:41 lapdog kernel: wlan0: STA: id=0x1f v0.8.3
Feb 28 13:59:41 lapdog kernel: wlan0: defaulting to host-based encryption as a 
workaround for firmware bug in Host AP mode WEP
Feb 28 13:59:41 lapdog kernel: wlan0: LinkStatus=2 (Disconnected)
Feb 28 13:59:41 lapdog /etc/hotplug/net.agent: invoke ifup wlan0
Feb 28 13:59:42 lapdog kernel: prism2: wlan0: operating mode changed 3 -> 1
Feb 28 13:59:42 lapdog kernel: wlan0: LinkStatus=2 (Disconnected)
Feb 28 13:59:42 lapdog kernel: wlan0: LinkStatus: BSSID=00:40:36:01:93:e7
Feb 28 13:59:42 lapdog kernel: wlan0: hfa384x_setup_bap - timeout after
Feb 28 13:59:42 lapdog kernel: wlan0: hostap_set_word_irq (rid=fce0, val=0, 
bap=0) failed
Feb 28 13:59:42 lapdog kernel: wlan0: failed to set TickTime 0
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_cmd: entry still in list? 
(entry=c7da5f60, type=0, res=0)
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_cmd: command was not completed 
(res=0, entry=c7da5f60, type=0, cmd=0x0001, param0=0x0000)
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_setup_bap - timeout before
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_set_rid (rid=fc0e, len=34) - 
failed - res=-110
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_setup_bap - timeout before
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_set_rid (rid=fc03, len=2) - 
failed - res=-110
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_setup_bap - timeout before
Feb 28 13:59:44 lapdog kernel: wlan0: hfa384x_set_rid (rid=fc02, len=34) - 
failed - res=-110

What is the deal?  What is this?

praedor
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE+X7eewDUPEkSvRHERArnGAKCV8c492heP1Q56FtEK5k8NwO7YYQCff7r1
DD2c8qUe60hLhJorBoG4UoE=
=8CWT
-----END PGP SIGNATURE-----




More information about the Hostap mailing list