hostap & channel bonding

Christian Zoffoli czoffoli
Tue Nov 12 18:15:51 PST 2002


Jouni Malinen ha scritto:
> On Wed, Nov 13, 2002 at 01:56:38AM +0100, Christian Zoffoli wrote:
> 
> 
>>'client' side
>>---
>>wlan0     IEEE 802.11-b  ESSID:"xmerlin"
>>           Mode:Managed  Frequency:2.412GHz  Access Point: 00:02:6F:01:86:0A
> 
> 
>>wlan1     IEEE 802.11-b  ESSID:"xmerlin"
>>           Mode:Managed  Frequency:2.412GHz  Access Point: 00:02:6F:01:86:0A
> 
> 
> Both of your client cards are using the same channel.. You should make
> sure that this does not happen, e.g., by using different SSID for the AP
> interfaces.
> 

using different SSID client wlans works at 2Mbit/s and i have many 
packet loss.


server
---
wlan0     IEEE 802.11-b  ESSID:"xmerlin"
           Mode:Master  Frequency:2.412GHz  Access Point: 00:02:6F:01:86:0A
           Bit Rate=11Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:0  Signal level:0  Noise level:0
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:0  Invalid misc:0   Missed beacon:0

wlan1     IEEE 802.11-b  ESSID:"xmerlin2"
           Mode:Master  Frequency:2.437GHz  Access Point: 00:02:6F:01:86:09
           Bit Rate=11Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:0  Signal level:0  Noise level:0
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:0  Invalid misc:0   Missed beacon:0
---


client
---
wlan0     IEEE 802.11-b  ESSID:"xmerlin"
           Mode:Managed  Frequency:2.412GHz  Access Point: 00:02:6F:01:86:0A
           Bit Rate:2Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:72/92  Signal level:-58 dBm  Noise level:-100 dBm
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:0  Invalid misc:0   Missed beacon:0

wlan1     IEEE 802.11-b  ESSID:"xmerlin2"
           Mode:Managed  Frequency:2.437GHz  Access Point: 00:02:6F:01:86:09
           Bit Rate:2Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:92/92  Signal level:-40 dBm  Noise level:-100 dBm
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:0  Invalid misc:0   Missed beacon:0


PING 10.0.6.150 (10.0.6.150): 56 data bytes
64 bytes from 10.0.6.150: icmp_seq=2 ttl=64 time=1.8 ms
64 bytes from 10.0.6.150: icmp_seq=6 ttl=64 time=2.5 ms
64 bytes from 10.0.6.150: icmp_seq=10 ttl=64 time=2.2 ms
64 bytes from 10.0.6.150: icmp_seq=14 ttl=64 time=2.1 ms
64 bytes from 10.0.6.150: icmp_seq=18 ttl=64 time=2.4 ms
64 bytes from 10.0.6.150: icmp_seq=22 ttl=64 time=2.4 ms
64 bytes from 10.0.6.150: icmp_seq=26 ttl=64 time=1.9 ms
64 bytes from 10.0.6.150: icmp_seq=30 ttl=64 time=2.2 ms

--- 10.0.6.150 ping statistics ---
32 packets transmitted, 8 packets received, 75% packet loss
round-trip min/avg/max = 1.8/2.1/2.5 ms

---







More information about the Hostap mailing list