hostap & channel bonding

[Christian Zoffoli]

Hi to all.
I'm working on two linux wireless routers. On each router i have
installed two senao cards and i'm working to with the bonding module to
aggregate two channels (1 - 6). All seems to work fine at the beginning 
...but after some test i can see a rate decrease on the second wlan 
(from 11Mbit to 1-2 Mbits).

Any suggestions ?

Thanks,
Christian



'client' side
---
wlan0     IEEE 802.11-b  ESSID:"xmerlin"
           Mode:Managed  Frequency:2.412GHz  Access Point: 00:02:6F:01:86:0A
           Bit Rate:11Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:90/92  Signal level:-47 dBm  Noise level:-100 dBm
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:4  Invalid misc:2978   Missed beacon:0

wlan1     IEEE 802.11-b  ESSID:"xmerlin"
           Mode:Managed  Frequency:2.412GHz  Access Point: 00:02:6F:01:86:0A
           Bit Rate:2Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:92/92  Signal level:-40 dBm  Noise level:-100 dBm
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:296  Invalid misc:7785   Missed beacon:0

----


'server' side
----
wlan0     IEEE 802.11-b  ESSID:"xmerlin"
           Mode:Master  Frequency:2.412GHz  Access Point: 00:02:6F:01:86:0A
           Bit Rate=11Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:0  Signal level:0  Noise level:0
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:711  Invalid misc:2697   Missed beacon:0

wlan1     IEEE 802.11-b  ESSID:"xmerlin"
           Mode:Master  Frequency:2.437GHz  Access Point: 00:02:6F:01:86:09
           Bit Rate=11Mb/s   Tx-Power=10 dBm   Sensitivity=1/3
           Retry min limit:8   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:0  Signal level:0  Noise level:0
           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:277  Invalid misc:72300   Missed beacon:0

----