Where to get the last station firmware?

evilbunny evilbunny
Mon Nov 11 21:44:53 PST 2002


Hello Pavel,

PR> I have never seen that.  Check the sources of prism2_srec - there is an
PR> option ("-i") to override this incompatibility.  As long as you upload to
PR> RAM, the risk to kill the card is low.

PR> My guess is that your primary firmware is not compatible with the 
PR> secondary firmware you are trying to load.  Try loading primary and 
PR> secondary firmware together.

How?

PS see below...

each time it fails i rmmod/insmod and all is well again, 1.3.4 works,
but I'd like to get WDS working with compatibility, I can flash via
windows, but I'd rather not, as it's a PCI card, and I'm planning to
deploy a few of them about the place...

-- 
Best regards,
 evilbunny                            mailto:evilbunny at sydneywireless.com

http://www.cacert.org - Free Security Certificates
http://www.nodedb.com - Think globally, network locally
http://www.sydneywireless.com - Telecommunications Freedom

./prism2_srec -r wlan0 -i srec_temp.fVBRuB/ak010101.hex
srec summary for ak010101.hex
Included file name: ak010101.hex
Component: 0x0015 1.1.1 (primary firmware)
Supported platforms:
  0x800c 1.0.0,  0x8013 1.0.0,  0x8017 1.0.0,  0x801b 1.0.0,  0x8022 1.0.0
Separate S3 data areas:
  addr 0x007E0000..0x007E0977 (len 2424)
  addr 0x007E0A00..0x007E131F (len 2336)
  addr 0x007E17FE..0x007E17FF (len 2)
Total data length: 4762 bytes
Start address 0x003f0000

Wireless LAN card information:
Components:
  NICID: 0x8013 v1.0.0
  PRIID: 0x0015 v1.0.5
  STAID: 0x001f v1.3.4

Verifying update compatibility and combining data:
PDR 0x0003 not found from wlan card PDA. Using default data.
  len=12: 39 39 53 41 30 31 30 30 30 30 30 30
PDR 0x0005 not found from wlan card PDA. Using default data.
  len=2: 00 01
PDR 0x0408 not found from wlan card PDA. Using default data.
  len=2: 64 00
Plug record length mismatch (PDR=0x0001): 12 != 16
==> use default
PDR 0x0001 not found from wlan card PDA. Using default data.
  len=16: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OK.

Downloading to volatile memory (RAM).
ioctl[PRISM2_IOCTL_DOWNLOAD]: Operation not permitted

Download failed!

./prism2_srec -r wlan0 -i srec_temp.fVBRuB/rf010506.hex
srec summary for rf010506.hex
Included file name: rf010506.hex
Component: 0x001f 1.5.6 (station firmware)
Supported platforms:
  0x800a 1.0.0,  0x800b 1.0.0,  0x800c 1.0.0,  0x800d 1.0.0,  0x8012 1.0.0
  0x8013 1.0.0,  0x8014 1.0.0,  0x8016 1.0.0,  0x8017 1.0.0,  0x8018 1.0.0
  0x801a 1.0.0,  0x801b 1.0.0,  0x801c 1.0.0,  0x8021 1.0.0,  0x8022 1.0.0
  0x8023 1.0.0,  0x800a 1.0.0,  0x800e 1.0.0,  0x8015 1.0.0,  0x8019 1.0.0
  0x801d 1.0.0,  0x8024 1.0.0
Separate S3 data areas:
  addr 0x007E1800..0x007ED6DF (len 48864)
  addr 0x007F0800..0x007F1893 (len 4244)
  addr 0x007FE000..0x007FECF9 (len 3322)
Total data length: 56430 bytes
Start address 0x003f0c01

Wireless LAN card information:
Components:
  NICID: 0x8013 v1.0.0
  PRIID: 0x0015 v1.0.5
  STAID: 0x001f v1.3.4

Verifying update compatibility and combining data:
Incompatible interfaces:
  SREC: role=Actor    variant=1 range=4-4 iface=Primary Firmware-Driver
  card: role=Supplier variant=1 range=1-3 iface=Primary Firmware-Driver
Ignoring incompatibility
PDR 0x0405 not found from wlan card PDA. Using default data.
  len=4: 00 00 00 30
PDR 0x0406 not found from wlan card PDA. Using default data.
  len=2: 64 00
PDR 0x0303 not found from wlan card PDA. Using default data.
  len=2: ff 1f
OK.

Downloading to volatile memory (RAM).
ioctl[PRISM2_IOCTL_DOWNLOAD]: Operation not permitted

Download failed!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 1966 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20021112/f228d2cf/attachment.bin 



More information about the Hostap mailing list