Fwd: [PATCH] serial: implement riscv SBI console support
Marcelo Politzer
marcelo.politzer at cartesi.io
Mon Sep 27 13:08:08 PDT 2021
Thank you for taking the time to review,
I've sent a v2 with your suggestions incorporated.
best,
Marcelo
On Sat, Sep 25, 2021 at 3:32 PM Antony Pavlov <antonynpavlov at gmail.com> wrote:
>
> On Fri, 24 Sep 2021 10:13:38 -0300
> Marcelo Politzer <marcelo.politzer at cartesi.io> wrote:
>
> Hi, Marcelo!
>
>
> > Implement a console over legacy SBI (version 0.1.0). There is a tiny ringbuffer
> > to simplify checking for presence and reading characters as separate steps.
> >
> > Signed-off-by: Marcelo Politzer <marcelo.politzer at cartesi.io>
> > ---
> > arch/riscv/cpu/core.c | 13 ++++++++
> > arch/riscv/lib/sbi.c | 11 +++++++
> > drivers/serial/Kconfig | 8 +++++
> > drivers/serial/Makefile | 1 +
> > drivers/serial/serial_sbi.c | 60 +++++++++++++++++++++++++++++++++++++
> > 5 files changed, 93 insertions(+)
> > create mode 100644 drivers/serial/serial_sbi.c
> >
> > diff --git a/arch/riscv/cpu/core.c b/arch/riscv/cpu/core.c
> > index 80730c05b..9226037f3 100644
> > --- a/arch/riscv/cpu/core.c
> > +++ b/arch/riscv/cpu/core.c
> > @@ -24,6 +24,7 @@
> > #include <magicvar.h>
> > #include <asm/system.h>
> > #include <io.h>
> > +#include <asm/sbi.h>
>
> There is no need to include <asm/sbi.h> here.
>
> >
> > static int riscv_request_stack(void)
> > {
> > @@ -33,6 +34,7 @@ static int riscv_request_stack(void)
> > coredevice_initcall(riscv_request_stack);
> >
> > static struct device_d timer_dev;
> > +static struct device_d serial_sbi_dev;
> >
> > static s64 hartid;
> >
> > @@ -75,6 +77,17 @@ static int riscv_probe(struct device_d *parent)
> > return ret;
> > }
> >
> > + if (IS_ENABLED(CONFIG_SERIAL_SBI) && !serial_sbi_dev.parent) {
> > + serial_sbi_dev.id = DEVICE_ID_SINGLE;
> > + serial_sbi_dev.device_node = 0;
> > + serial_sbi_dev.parent = parent;
> > + dev_set_name(&serial_sbi_dev, "riscv-serial-sbi");
> > +
> > + ret = platform_device_register(&serial_sbi_dev);
> > + if (ret)
> > + return ret;
> > + }
> > +
>
> Please, use tabs for indentation!
>
>
> > hartid = riscv_hartid();
> > if (hartid >= 0)
> > globalvar_add_simple_uint64("hartid", &hartid, "%llu");
> > diff --git a/arch/riscv/lib/sbi.c b/arch/riscv/lib/sbi.c
> > index 45a04fb82..209069c98 100644
> > --- a/arch/riscv/lib/sbi.c
> > +++ b/arch/riscv/lib/sbi.c
> > @@ -64,3 +64,14 @@ static int sbi_init(void)
> >
> > }
> > core_initcall(sbi_init);
> > +
> > +
>
> No extra emptyline here.
>
> > +void sbi_console_putchar(int ch)
> > +{
> > + sbi_ecall(SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, ch, 0, 0, 0, 0, 0);
> > +}
> > +
> > +int sbi_console_getchar(void)
> > +{
> > + return sbi_ecall(SBI_EXT_0_1_CONSOLE_GETCHAR, 0, 0, 0, 0, 0,
> > 0, 0).error;
> > +}
> > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index b9750d177..5e30ea388 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -173,4 +173,12 @@ config SERIAL_SIFIVE
> > contains a SiFive UART IP block. This type of UART is present on
> > SiFive FU540 SoCs, among others.
> >
> > +config SERIAL_SBI
> > + tristate "RISCV Serial support over SBI's HTIF"
> > + depends on OFDEVICE
> > + depends on RISCV_SBI
> > + help
> > + Select this option if you are building barebox for a RISCV platform
> > + that implements a serial over SBI.
> > +
> > endmenu
> > diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> > index 5120b1737..b1de436ed 100644
> > --- a/drivers/serial/Makefile
> > +++ b/drivers/serial/Makefile
> > @@ -24,3 +24,4 @@ obj-$(CONFIG_DRIVER_SERIAL_DIGIC) +=
> > serial_digic.o
> > obj-$(CONFIG_DRIVER_SERIAL_LPUART) += serial_lpuart.o
> > obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
> > obj-$(CONFIG_SERIAL_SIFIVE) += serial_sifive.o
> > +obj-$(CONFIG_SERIAL_SBI) += serial_sbi.o
> > diff --git a/drivers/serial/serial_sbi.c b/drivers/serial/serial_sbi.c
> > new file mode 100644
> > index 000000000..7217ce9cc
> > --- /dev/null
> > +++ b/drivers/serial/serial_sbi.c
> > @@ -0,0 +1,60 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2021 Marcelo Politzer <marcelo.politzer at cartesi.io>
> > + */
> > +
> > +#include <common.h>
> > +#include <driver.h>
> > +#include <malloc.h>
> > +#include <io.h>
> > +#include <of.h>
>
> Please drop <io.h> and <of.h> inclusion here. These header files are unused.
>
> > +#include <asm/sbi.h>
> > +
> > +struct sbi_serial_priv {
> > + struct console_device cdev;
> > + uint8_t b[2], head, tail;
> > +};
> > +
> > +static int sbi_serial_getc(struct console_device *cdev)
> > +{
> > + struct sbi_serial_priv *priv = cdev->dev->priv;
> > + if (priv->head == priv->tail)
> > + return -1;
> > + return priv->b[priv->head++ & 0x1];
> > +}
> > +
> > +static void sbi_serial_putc(struct console_device *cdev, const char ch)
> > +{
> > + sbi_console_putchar(ch);
> > +}
> > +
> > +static int sbi_serial_tstc(struct console_device *cdev)
> > +{
> > + struct sbi_serial_priv *priv = cdev->dev->priv;
> > + int c = sbi_console_getchar();
> > +
> > + if (c != -1)
> > + priv->b[priv->tail++ & 0x1] = c;
> > + return priv->head != priv->tail;
> > +}
> > +
> > +static int sbi_serial_probe(struct device_d *dev)
> > +{
> > + struct sbi_serial_priv *priv;
> > +
> > + priv = dev->priv = xzalloc(sizeof(*priv));
> > + priv->cdev.dev = dev;
> > + priv->cdev.putc = sbi_serial_putc;
> > + priv->cdev.getc = sbi_serial_getc;
> > + priv->cdev.tstc = sbi_serial_tstc;
> > + priv->cdev.flush = 0;
> > + priv->cdev.setbrg = 0;
> > +
> > + return console_register(&priv->cdev);
> > +}
> > +
> > +static struct driver_d serial_sbi_driver = {
> > + .name = "riscv-serial-sbi",
> > + .probe = sbi_serial_probe,
> > +};
> > +postcore_platform_driver(serial_sbi_driver);
> > --
> > 2.32.0
> >
> > _______________________________________________
> > barebox mailing list
> > barebox at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
>
>
> --
> Best regards,
> Antony Pavlov
More information about the barebox
mailing list