[PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support

[Sascha Hauer]

On Fri, May 28, 2021 at 12:29:51PM +0300, Antony Pavlov wrote:
> On Thu, 27 May 2021 21:36:00 +0200
> Gwenhael Goavec-Merou <gwenj at trabucayre.com> wrote:
> 
> > From: Gwenhael Goavec-Merou <gwenhael.goavec-merou at trabucayre.com>
> > 
> > The Terasic DE10-Nano board is based on CycloneV SoCFPGA (5CSEBA6) with
> > 
> > What has been tested to work:
> > - SD card
> > - Gigabit network
> 
> What is the status of FPGA bitstream loading?
> 
> ...
> 
> > diff --git a/arch/arm/boards/terasic-de10-nano/iocsr_config_cyclone5.c b/arch/arm/boards/terasic-de10-nano/iocsr_config_cyclone5.c
> > new file mode 100644
> > index 000000000..c1291dea4
> > --- /dev/null
> > +++ b/arch/arm/boards/terasic-de10-nano/iocsr_config_cyclone5.c
> > @@ -0,0 +1,678 @@
> > +/* GENERATED FILE - DO NOT EDIT */
> > +/*
> > + * Copyright Altera Corporation (C) 2012-2014. All rights reserved
> > + *
> > + * SPDX-License-Identifier:    BSD-3-Clause
> 
> To: Sascha
> Can we add BSD-3-Clause-licensed file into barebox?

I assume so, yes. Otherwise we would have a problem, a lot of the Kernel
dts files are BSD-3-Clause licensed.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |