[PATCH v2 6/7] ARM: zynqmp: defconfig: enable more features

[Michael Tretter]

Enable network, file system, and PSCI support in the defconfig to get a
Barebox with a useful feature set when building the ZynqMP defconfig.

Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
---
Changelog:

v2: none
---
 arch/arm/configs/zynqmp_defconfig | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/configs/zynqmp_defconfig b/arch/arm/configs/zynqmp_defconfig
index 6f5612fa92a0..2cd878133223 100644
--- a/arch/arm/configs/zynqmp_defconfig
+++ b/arch/arm/configs/zynqmp_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_MACH_XILINX_ZCU104=y
+CONFIG_ARM_PSCI_CLIENT=y
 CONFIG_MMU=y
 CONFIG_MALLOC_SIZE=0x0
 CONFIG_MALLOC_TLSF=y
@@ -12,32 +13,54 @@ CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
 CONFIG_BOOTM_OFTREE=y
+CONFIG_BLSPEC=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_RESET_SOURCE=y
 CONFIG_LONGHELP=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_GO=y
 CONFIG_CMD_RESET=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_EXPORT=y
+CONFIG_CMD_DEFAULTENV=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_SAVEENV=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TFTP=y
 CONFIG_CMD_EDIT=y
 CONFIG_CMD_MENU=y
 CONFIG_CMD_MENU_MANAGEMENT=y
 CONFIG_CMD_READLINE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_BAREBOX_UPDATE=y
+CONFIG_CMD_FIRMWARELOAD=y
+CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
 CONFIG_NET=y
+CONFIG_NET_NFS=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_OF_BAREBOX_ENV_IN_FS=y
+CONFIG_OF_OVERLAY_LIVE=y
 CONFIG_DRIVER_SERIAL_CADENCE=y
 CONFIG_DRIVER_NET_MACB=y
+CONFIG_DP83867_PHY=y
 # CONFIG_SPI is not set
 CONFIG_MCI=y
 CONFIG_MCI_ARASAN=y
 CONFIG_FIRMWARE_ZYNQMP_FPGA=y
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
 CONFIG_DIGEST=y
-- 
2.30.2