On 06.06.21 14:23, Oleksij Rempel wrote:
> Add state flags for each registered device and set error state on each
> dev_err print.
> This states can be used by users to identify erroneous device.
I thought this over a bit. We have dev_err calls when:
- probes are permanently deferred
- have actual probe (!= -ENODEV, != -ENXIO, != -EPROBE_DEFER)
- after probe something fails (e.g. you got the regulator, but couldn't enable it)
So, I think the hook point is appropriate. Board code could extend this
and get a device and do some extra tests and use dev_set_err as appropriate.
So feel free to add:
Acked-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> ---
> include/driver.h | 13 +++++++++++++
> include/printk.h | 5 ++++-
> 2 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/include/driver.h b/include/driver.h
> index d84fe35d50..b64a8e258c 100644
> --- a/include/driver.h
> +++ b/include/driver.h
> @@ -88,6 +88,9 @@ struct device_d {
> * when the driver should actually detect client devices
> */
> int (*detect) (struct device_d *);
> +
> +#define DEV_ERR BIT(0)
> + u32 run_flags;
Just turn it into a bit field instead?
> };
>
> /** @brief Describes a driver present in the system */
> @@ -361,6 +364,16 @@ static inline int dev_close_default(struct device_d *dev, struct filep *f)
> return 0;
> }
>
> +static inline void dev_set_err(struct device_d *dev)
> +{
> + dev->run_flags |= DEV_ERR;
> +}
> +
> +static inline bool dev_have_err(struct device_d *dev)
> +{
> + return !!(dev->run_flags & DEV_ERR);
> +}
> +
> struct bus_type {
> char *name;
> int (*match)(struct device_d *dev, struct driver_d *drv);
> diff --git a/include/printk.h b/include/printk.h
> index f83ad3bf07..6c563be3e6 100644
> --- a/include/printk.h
> +++ b/include/printk.h
> @@ -61,7 +61,10 @@ static inline int pr_print(int level, const char *format, ...)
> #define dev_crit(dev, format, arg...) \
> __dev_printf(2, (dev) , format , ## arg)
> #define dev_err(dev, format, arg...) \
> - __dev_printf(3, (dev) , format , ## arg)
> + ({ \
You're already using statement expressions, so you could add a
struct device_d *__dev = (dev);
here and use that.
> + dev_set_err(dev); \
> + __dev_printf(3, (dev) , format , ## arg); \
> + })
> #define dev_warn(dev, format, arg...) \
> __dev_printf(4, (dev) , format , ## arg)
> #define dev_notice(dev, format, arg...) \
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |