[PATCH 02/18] ARM: boards: mx6-sabrelite: [cosmetic] make use of IMX_GPIO_NR

Marco Felsch m.felsch at pengutronix.de
Mon Sep 28 11:50:25 EDT 2020


Convert the global number to the more readable IMX_GPIO_NR() macro, no
functional changes.

Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
 .../boards/freescale-mx6-sabrelite/board.c    | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c
index f4f2994a51..020a44297a 100644
--- a/arch/arm/boards/freescale-mx6-sabrelite/board.c
+++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c
@@ -70,37 +70,37 @@ static int ksz9021rn_phy_fixup(struct phy_device *dev)
 
 static struct gpio fec_gpios[] = {
 	{
-		.gpio = 87,
+		.gpio = IMX_GPIO_NR(3, 23),
 		.flags = GPIOF_OUT_INIT_LOW,
 		.label = "phy-rst",
 	}, {
-		.gpio = 190,
+		.gpio = IMX_GPIO_NR(6, 30),
 		.flags = GPIOF_OUT_INIT_HIGH,
 		.label = "phy-addr2",
 	}, {
-		.gpio = 23,
+		.gpio = IMX_GPIO_NR(1, 23),
 		.flags = GPIOF_OUT_INIT_LOW,
 		.label = "phy-led-mode",
 	}, {
 		/* MODE strap-in pins: advertise all capabilities */
-		.gpio = 185,
+		.gpio = IMX_GPIO_NR(6, 25),
 		.flags = GPIOF_OUT_INIT_HIGH,
 		.label = "phy-adv1",
 	}, {
-		.gpio = 187,
+		.gpio = IMX_GPIO_NR(6, 27),
 		.flags = GPIOF_OUT_INIT_HIGH,
 		.label = "phy-adv1",
 	}, {
-		.gpio = 188,
+		.gpio = IMX_GPIO_NR(6, 28),
 		.flags = GPIOF_OUT_INIT_HIGH,
 		.label = "phy-adv1",
 	}, {
-		.gpio = 189,
+		.gpio = IMX_GPIO_NR(6, 29),
 		.flags = GPIOF_OUT_INIT_HIGH,
 		.label = "phy-adv1",
 	}, {
 		/* Enable 125 MHz clock output */
-		.gpio = 184,
+		.gpio = IMX_GPIO_NR(6, 24),
 		.flags = GPIOF_OUT_INIT_HIGH,
 		.label = "phy-125MHz",
 	},
@@ -139,9 +139,9 @@ fs_initcall(sabrelite_ksz9021rn_setup);
 static void sabrelite_ehci_init(void)
 {
 	/* hub reset */
-	gpio_direction_output(204, 0);
+	gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
 	udelay(2000);
-	gpio_set_value(204, 1);
+	gpio_set_value(IMX_GPIO_NR(7, 12), 1);
 }
 
 static int sabrelite_devices_init(void)
-- 
2.20.1




More information about the barebox mailing list