[PATCH] ARM: nxp i.MX8MM evk: make locally used data static

Lucas Stach l.stach at pengutronix.de
Thu Nov 12 13:00:05 EST 2020


Am Donnerstag, den 12.11.2020, 16:03 +0100 schrieb Sascha Hauer:
> Make locally used data static so that it doesn't conflict with other
> data with the same name.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>  arch/arm/boards/nxp-imx8mp-evk/lpddr4-timing.c | 18 +++++++++-------

Subject says i.MX8MM EVK, but the code change is in i.MX8MP EVK.

Regards,
Lucas

> --
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boards/nxp-imx8mp-evk/lpddr4-timing.c b/arch/arm/boards/nxp-imx8mp-evk/lpddr4-timing.c
> index bc4c10fe8d..3028bc084c 100644
> --- a/arch/arm/boards/nxp-imx8mp-evk/lpddr4-timing.c
> +++ b/arch/arm/boards/nxp-imx8mp-evk/lpddr4-timing.c
> @@ -7,7 +7,7 @@
>  #include <soc/imx8m/ddr.h>
>  #include <soc/imx8m/lpddr4_define.h>
>  
> -struct dram_cfg_param ddr_ddrc_cfg[] = {
> +static struct dram_cfg_param ddr_ddrc_cfg[] = {
>  	/** Initialize DDRC registers **/
>  	{ 0x3d400304, 0x1 },
>  	{ 0x3d400030, 0x1 },
> @@ -117,7 +117,7 @@ struct dram_cfg_param ddr_ddrc_cfg[] = {
>  };
>  
>  /* PHY Initialize Configuration */
> -struct dram_cfg_param ddr_ddrphy_cfg[] = {
> +static struct dram_cfg_param ddr_ddrphy_cfg[] = {
>  	{ 0x100a0, 0x0 },
>  	{ 0x100a1, 0x1 },
>  	{ 0x100a2, 0x2 },
> @@ -326,7 +326,7 @@ struct dram_cfg_param ddr_ddrphy_cfg[] = {
>  };
>  
>  /* ddr phy trained csr */
> -struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
> +static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
>  	{ 0x200b2, 0x0 },
>  	{ 0x1200b2, 0x0 },
>  	{ 0x2200b2, 0x0 },
> @@ -1049,7 +1049,7 @@ struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
>  };
>  
>  /* P0 message block paremeter for training firmware */
> -struct dram_cfg_param ddr_fsp0_cfg[] = {
> +static struct dram_cfg_param ddr_fsp0_cfg[] = {
>  	{ 0xd0000, 0x0 },
>  	{ 0x54003, 0xfa0 },
>  	{ 0x54004, 0x2 },
> @@ -1088,7 +1088,7 @@ struct dram_cfg_param ddr_fsp0_cfg[] = {
>  };
>  
>  /* P1 message block paremeter for training firmware */
> -struct dram_cfg_param ddr_fsp1_cfg[] = {
> +static struct dram_cfg_param ddr_fsp1_cfg[] = {
>  	{ 0xd0000, 0x0 },
>  	{ 0x54002, 0x101 },
>  	{ 0x54003, 0x190 },
> @@ -1128,7 +1128,7 @@ struct dram_cfg_param ddr_fsp1_cfg[] = {
>  };
>  
>  /* P2 message block paremeter for training firmware */
> -struct dram_cfg_param ddr_fsp2_cfg[] = {
> +static struct dram_cfg_param ddr_fsp2_cfg[] = {
>  	{ 0xd0000, 0x0 },
>  	{ 0x54002, 0x102 },
>  	{ 0x54003, 0x64 },
> @@ -1168,7 +1168,7 @@ struct dram_cfg_param ddr_fsp2_cfg[] = {
>  };
>  
>  /* P0 2D message block paremeter for training firmware */
> -struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
> +static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
>  	{ 0xd0000, 0x0 },
>  	{ 0x54003, 0xfa0 },
>  	{ 0x54004, 0x2 },
> @@ -1209,7 +1209,7 @@ struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
>  };
>  
>  /* DRAM PHY init engine image */
> -struct dram_cfg_param ddr_phy_pie[] = {
> +static struct dram_cfg_param ddr_phy_pie[] = {
>  	{ 0xd0000, 0x0 },
>  	{ 0x90000, 0x10 },
>  	{ 0x90001, 0x400 },
> @@ -1801,7 +1801,7 @@ struct dram_cfg_param ddr_phy_pie[] = {
>  	{ 0xd0000, 0x1 }
>  };
>  
> -struct dram_fsp_msg ddr_dram_fsp_msg[] = {
> +static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
>  	{
>  		/* P0 4000mts 1D */
>  		.drate = 4000,




More information about the barebox mailing list