[PATCH 1/2] ARM: at91: dts: sama5d27-som1: adapt to upstream partition layout

[Sascha Hauer]

On Sat, Jul 11, 2020 at 11:02:02AM +0200, Ahmad Fatoum wrote:
> Linux v5.8-rc1 adds partitions to the flash at 0 node, which now overlap
> with the partitions we define and resulting in errors:
> 
>   ERROR: m25p0.barebox: New partition m25p0.barebox conflicts
> 	with m25p0.at91bootstrap
>   ERROR: m25p0.barebox-environment: New partition
>   	m25p0.barebox-environment conflicts with m25p0.bootloader
> 
> We don't want to reuse those partitions as their name may and probably
> will change (they have leading zeroes in the unit address).
> We could use the &{/path/to/partition} syntax, but that might be broken
> soon as well, as the nodes aren't inside a partitions node with a
> "fixed-partitions" compatible.
> The busses also don't align with the yaml schema and might be renamed.
> 
> Nuke the full flash at 0 node and supply ours and avoid these problems.
> The offsets of the partitions have been adjusted to coincide with the
> upstream offsets for second stage bootloader and environment.
> 
> Signed-off-by: Ahmad Fatoum <ahmad at a3f.at>
> ---
> Hello Sascha,
> 
> The brekage doesn't seem to end..
> if possible please reorder before v5.8-rc1 dts/ sync.
> ---

I haven't reordered it, please see if you are happy with the result
anyway. It looks like I would have to put the whole at91 stack before
the dts updates, I rather don't do that.

Regards,
 Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |