[PATCH 01/25] arm: at91: refactor lowlevel_init selection
Sam Ravnborg
sam at ravnborg.org
Mon Jan 1 08:48:04 PST 2018
The aim with this conversion is to drop the dependency
where the mach-at91/ code call code in the boards file.
This dependency must be dropepd to enable multi-image builds.
The selection of lowlevel_init functions are pushed to
the individual boards.
Use AT91SAM926X_BOARD_INIT for the boards that share the
at91sam926x_board_init file, and push this to the
individual boards.
bootstrap is likewise pushed out to the individual boards.
Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
---
arch/arm/boards/at91sam9261ek/Makefile | 2 +-
arch/arm/boards/at91sam9263ek/Makefile | 2 +-
arch/arm/boards/mmccpu/Makefile | 3 +-
arch/arm/boards/pm9261/Makefile | 2 +-
arch/arm/boards/pm9263/Makefile | 2 +-
arch/arm/boards/tny-a926x/Makefile | 7 +-
arch/arm/boards/usb-a926x/Makefile | 6 +-
arch/arm/mach-at91/Kconfig | 85 ++++++++++++++++++----
arch/arm/mach-at91/Makefile | 26 +++----
.../mach-at91/include/mach/at91_lowlevel_init.h | 2 +-
10 files changed, 97 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boards/at91sam9261ek/Makefile b/arch/arm/boards/at91sam9261ek/Makefile
index 1764da93f..667095ae4 100644
--- a/arch/arm/boards/at91sam9261ek/Makefile
+++ b/arch/arm/boards/at91sam9261ek/Makefile
@@ -1,4 +1,4 @@
obj-y += init.o
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-$(CONFIG_AT91SAM926X_LWL) += lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9261ek
diff --git a/arch/arm/boards/at91sam9263ek/Makefile b/arch/arm/boards/at91sam9263ek/Makefile
index 2072cd416..de4d75690 100644
--- a/arch/arm/boards/at91sam9263ek/Makefile
+++ b/arch/arm/boards/at91sam9263ek/Makefile
@@ -1,4 +1,4 @@
obj-y += init.o
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-y += lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9263ek
diff --git a/arch/arm/boards/mmccpu/Makefile b/arch/arm/boards/mmccpu/Makefile
index 1398c26a0..d8289a341 100644
--- a/arch/arm/boards/mmccpu/Makefile
+++ b/arch/arm/boards/mmccpu/Makefile
@@ -1,3 +1,4 @@
obj-y += init.o
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+# Not used, documented by a lwl-n assignment
+lwl-n += lowlevel_init.o
diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
index bff467b1d..e9bf1212f 100644
--- a/arch/arm/boards/pm9261/Makefile
+++ b/arch/arm/boards/pm9261/Makefile
@@ -1,4 +1,4 @@
obj-y += init.o
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-y += lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-pm9261
diff --git a/arch/arm/boards/pm9263/Makefile b/arch/arm/boards/pm9263/Makefile
index 1398c26a0..68bfbfa92 100644
--- a/arch/arm/boards/pm9263/Makefile
+++ b/arch/arm/boards/pm9263/Makefile
@@ -1,3 +1,3 @@
obj-y += init.o
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-y += lowlevel_init.o
diff --git a/arch/arm/boards/tny-a926x/Makefile b/arch/arm/boards/tny-a926x/Makefile
index dba2f8cfc..24bbf2356 100644
--- a/arch/arm/boards/tny-a926x/Makefile
+++ b/arch/arm/boards/tny-a926x/Makefile
@@ -1,9 +1,8 @@
obj-y += init.o
-bootstrap-$(CONFIG_MACH_TNY_A9263) = tny_a9263_bootstrap.o
-obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y)
+obj-$(CONFIG_AT91_BOOTSTRAP) += tny_a9263_bootstrap.o
-lowlevel_init-$(CONFIG_MACH_TNY_A9263) = tny_a9263_lowlevel_init.o
+# Not used, documented with a lwl-n assignment
+lwl-n += tny_a9263_lowlevel_init.o
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += $(lowlevel_init-y)
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-tny-a926x
diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile
index 4f09581e3..a4eae1844 100644
--- a/arch/arm/boards/usb-a926x/Makefile
+++ b/arch/arm/boards/usb-a926x/Makefile
@@ -1,9 +1,7 @@
obj-y += init.o
-bootstrap-$(CONFIG_MACH_USB_A9263) = usb_a9263_bootstrap.o
-obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y)
+obj-$(CONFIG_AT91_BOOTSTRAP) += usb_a9263_bootstrap.o
-lowlevel_init-$(CONFIG_MACH_USB_A9263) = usb_a9263_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM926X_LWL) += usb_a9263_lowlevel_init.o
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += $(lowlevel_init-y)
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-usb-a926x
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3b572ebdf..e94c5b0a8 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -29,7 +29,37 @@ config HAVE_AT91_H32MX
config HAVE_AT91_GENERATED_CLK
bool
-config HAVE_AT91_LOWLEVEL_INIT
+# Select if board support bootstrap
+config HAVE_AT91_BOOTSTRAP
+ bool
+
+# Select if board uses the common at91sam926x_board_init
+config AT91SAM926X_BOARD_INIT
+ bool
+
+# Select if board uses the common at91sam926x_lowlevel_init
+config AT91SAM926X_LWL
+ bool
+
+# Select if board uses barebox reset vector from mach-at91
+# as implemented in the *lowlevel_init.c files
+config AT91SAM9260_LWL
+ bool
+config AT91SAM9261_LWL
+ bool
+config AT91SAM9263_LWL
+ bool
+config AT91SAM9G45_LWL
+ bool
+config AT91SAM9X5_LWL
+ bool
+config AT91SAM9N12_LWL
+ bool
+config AT91RM9200_LWL
+ bool
+config SAMA5D3_LWL
+ bool
+config SAMA5D4_LWL
bool
config AT91SAM9_SMC
@@ -71,9 +101,6 @@ config AT91SAM9G45_RESET
config HAVE_AT91_LOAD_BAREBOX_SRAM
bool
-config AT91SAM9_LOWLEVEL_INIT
- bool
-
comment "Atmel AT91 System-on-Chip"
config SOC_AT91RM9200
@@ -88,7 +115,6 @@ config SOC_AT91SAM9260
select HAVE_AT91_DBGU0
select HAS_MACB
select AT91SAM9_RESET
- select AT91SAM9_LOWLEVEL_INIT
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
@@ -98,7 +124,6 @@ config SOC_AT91SAM9261
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select AT91SAM9_RESET
- select AT91SAM9_LOWLEVEL_INIT
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
@@ -108,7 +133,6 @@ config SOC_AT91SAM9263
select HAVE_AT91_DBGU1
select HAS_MACB
select AT91SAM9_RESET
- select AT91SAM9_LOWLEVEL_INIT
select HAVE_AT91_LOAD_BAREBOX_SRAM
config SOC_AT91SAM9G45
@@ -239,6 +263,7 @@ choice
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
+ select AT91RM9200_LWL
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
@@ -256,16 +281,19 @@ choice
config MACH_ANIMEO_IP
bool "Somfy Animeo IP"
+ select AT91SAM9260_LWL
depends on !CONSOLE_NONE
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK"
+ select AT91SAM9260_LWL
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
@@ -273,6 +301,7 @@ config MACH_QIL_A9260
config MACH_TNY_A9260
bool "CALAO TNY-A9260"
select SUPPORT_CALAO_MOB_TNY_MD2
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems TNY-A9260.
<http://www.calao-systems.com>
@@ -280,12 +309,14 @@ config MACH_TNY_A9260
config MACH_USB_A9260
bool "CALAO USB-A9260"
select SUPPORT_CALAO_DAB_MMX
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
config MACH_GE863
bool "Telit EVK-PRO3"
+ select AT91SAM9260_LWL
help
Say y here if you are using Telit EVK-PRO3 with GE863-PRO3
<http://www.telit.com>
@@ -306,7 +337,9 @@ config MACH_AT91SAM9261EK
select HAS_DM9000
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9261_LWL
+ select AT91SAM926X_LWL
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -314,7 +347,9 @@ config MACH_AT91SAM9261EK
config MACH_PM9261
bool "Ronetix PM9261"
select HAS_DM9000
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9261_LWL
+ select AT91SAM926X_LWL
help
Say y here if you are using the Ronetix PM9261 Board
@@ -333,6 +368,7 @@ config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
select HAS_DM9000
+ select AT91SAM9261_LWL
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -351,6 +387,7 @@ choice
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select AT91SAM9260_LWL
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
@@ -358,6 +395,7 @@ config MACH_AT91SAM9G20EK
config MACH_TNY_A9G20
select SUPPORT_CALAO_MOB_TNY_MD2
bool "CALAO TNY-A9G20"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems TNY-A9G20.
<http://www.calao-systems.com>
@@ -365,6 +403,7 @@ config MACH_TNY_A9G20
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
select SUPPORT_CALAO_DAB_MMX
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
@@ -372,18 +411,21 @@ config MACH_USB_A9G20
config MACH_DSS11
bool "aizo dSS11"
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select AT91SAM9260_LWL
help
Select this if you are using aizo dSS11
that embeds only one SD/MMC slot.
config MACH_QIL_A9G20
bool "CALAO QIL-A9G20 board"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems QIL-A9G20 Board.
<http://www.calao-systems.com>
config MACH_HABA_KNX_LITE
bool "CALAO HABA-KNX-LITE"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems HABA-KNX-LITE.
<http://www.calao-systems.com>
@@ -400,32 +442,41 @@ choice
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK"
- select HAVE_AT91_LOWLEVEL_INIT
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
+ select AT91SAM926X_LWL
help
Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board
config MACH_MMCCPU
bool "Bucyrus MMC-CPU"
+ select AT91SAM9263_LWL
help
Say y here if you are using the Bucyrus MMC-CPU
config MACH_PM9263
bool "Ronetix PM9263"
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
+ select AT91SAM926X_LWL
help
Say y here if you are using the Ronetix PM9263 Board
config MACH_TNY_A9263
bool "CALAO TNY-A9263"
select SUPPORT_CALAO_MOB_TNY_MD2
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
help
Select this if you are using a Calao Systems TNY-A9263.
<http://www.calao-systems.com>
config MACH_USB_A9263
bool "CALAO USB-A9263"
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
+ select AT91SAM926X_LWL
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
@@ -441,12 +492,14 @@ choice
config MACH_AT91SAM9M10IHD
bool "Atmel AT91SAM9M10IDH Tablet"
+ select AT91SAM9G45_LWL
help
Select this if you are using Atmel's AT91SAM9M10IHD Tablet
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select AT91SAM9G45_LWL
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit
or AT91SAM9G45-EKES or AT91SAM9M10-EKES (for those 2 select the LG LCD)
@@ -454,6 +507,7 @@ config MACH_AT91SAM9M10G45EK
config MACH_PM9G45
bool "Ronetix PM9G45"
+ select AT91SAM9G45_LWL
help
Say y here if you are using the Ronetix PM9G45 Board
@@ -470,6 +524,7 @@ choice
config MACH_AT91SAM9N12EK
bool "Atmel AT91SAM9N12 Evaluation Kit"
+ select AT91SAM9N12_LWL
help
Select this if you are using Atmel's AT91SAM9N12-EK Evaluation Kit.
@@ -486,11 +541,13 @@ choice
config MACH_SAMA5D3XEK
bool "Atmel SAMA5D3X Evaluation Kit"
+ select SAMA5D3_LWL
help
Select this if you are using Atmel's SAMA5D3X-EK Evaluation Kit.
config MACH_SAMA5D3_XPLAINED
bool "Atmel SAMA5D3_XPLAINED Evaluation Kit"
+ select SAMA5D3_LWL
help
Select this if you are using Atmel's SAMA5D3_XPLAINED Evaluation Kit.
@@ -507,11 +564,13 @@ choice
config MACH_SAMA5D4EK
bool "Atmel SAMA5D4 Evaluation Kit"
+ select SAMA5D4_LWL
help
Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit.
config MACH_SAMA5D4_XPLAINED
bool "Atmel SAMA5D4 XPLAINED ULTRA Evaluation Kit"
+ select SAMA5D4_LWL
help
Select this if you are using Atmel's SAMA5D4_XPLAINED ULTRA Evaluation Kit.
@@ -596,7 +655,7 @@ config CALAO_MB_QIL_A9260
config AT91_BOOTSTRAP
bool "at91 bootstrap"
- depends on HAVE_AT91_LOWLEVEL_INIT
+ depends on HAVE_AT91_BOOTSTRAP
select BOOTSTRAP
config AT91_LOAD_BAREBOX_SRAM
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 0892fb4b5..71851d26c 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -6,19 +6,19 @@ endif
obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o
-obj-$(CONFIG_AT91_BOOTSTRAP) += bootstrap.o
-sam926x_lowlevel_init-$(CONFIG_AT91SAM9_LOWLEVEL_INIT) = at91sam926x_lowlevel_init.o
-lowlevel_init-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) = $(sam926x_lowlevel_init-y)
-lowlevel_init-$(CONFIG_SOC_AT91SAM9260) += at91sam9260_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9261) += at91sam9261_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9263) += at91sam9263_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12_lowlevel_init.o
-lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
-lowlevel_init-$(CONFIG_ARCH_SAMA5D3) += sama5d3_lowlevel_init.o
-lowlevel_init-$(CONFIG_ARCH_SAMA5D4) += sama5d3_lowlevel_init.o
-lwl-y += $(lowlevel_init-y)
+obj-$(CONFIG_AT91_BOOTSTRAP) += bootstrap.o
+
+lwl-$(CONFIG_AT91SAM926X_LWL) += at91sam926x_lowlevel_init.o
+
+lwl-$(CONFIG_AT91RM9200_LWL) += at91rm9200_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9260_LWL) += at91sam9260_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9261_LWL) += at91sam9261_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9263_LWL) += at91sam9263_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9G45_LWL) += at91sam9g45_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9X5_LWL) += at91sam9x5_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9N12_LWL) += at91sam9n12_lowlevel_init.o
+lwl-$(CONFIG_SAMA5D3_LWL) += sama5d3_lowlevel_init.o
+lwl-$(CONFIG_SAMA5D4_LWL) += sama5d3_lowlevel_init.o
obj-$(CONFIG_AT91SAM9_RESET) += at91sam9_reset.o
obj-$(CONFIG_AT91SAM9G45_RESET) += at91sam9g45_reset.o
diff --git a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
index 6b37e49e9..d72dfff38 100644
--- a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
+++ b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
@@ -35,7 +35,7 @@ struct at91sam926x_lowlevel_cfg {
u32 rstc_rmr;
};
-#ifdef CONFIG_HAVE_AT91_LOWLEVEL_INIT
+#ifdef CONFIG_AT91SAM926X_LWL
void at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg);
void at91sam926x_lowlevel_init(struct at91sam926x_lowlevel_cfg *cfg);
#else
--
2.12.0
More information about the barebox
mailing list