[PATCH 21/23] dss11: move reset vector to board code

[Sam Ravnborg]

Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
---
 arch/arm/boards/dss11/Makefile   |  1 +
 arch/arm/boards/dss11/lowlevel.c | 26 ++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig       |  1 -
 3 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/dss11/lowlevel.c

diff --git a/arch/arm/boards/dss11/Makefile b/arch/arm/boards/dss11/Makefile
index eb072c016..2da0494d4 100644
--- a/arch/arm/boards/dss11/Makefile
+++ b/arch/arm/boards/dss11/Makefile
@@ -1 +1,2 @@
 obj-y += init.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/dss11/lowlevel.c b/arch/arm/boards/dss11/lowlevel.c
new file mode 100644
index 000000000..02896856d
--- /dev/null
+++ b/arch/arm/boards/dss11/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Under GPLv2
+  */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+
+	barebox_arm_entry(AT91_CHIPSELECT_1,
+			  at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)),
+			  NULL);
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index abbf9d4a1..73be26749 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -372,7 +372,6 @@ config MACH_USB_A9G20
 config MACH_DSS11
 	bool "aizo dSS11"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
-	select AT91SAM9260_LWL
 	help
 	  Select this if you are using aizo dSS11
 	  that embeds only one SD/MMC slot.
-- 
2.12.0