[PATCH 09/23] usb-a926x: move reset vector to board code

[Sam Ravnborg]

For all Calao USB boards move reset vector to board code.
Introduce two different lowlevel.c files, on
for each processor.
Include a rename to make filenames similar.

Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
---
 arch/arm/boards/usb-a926x/Makefile                 |  4 +-
 arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c     | 26 +++++++++++++
 ..._a9263_lowlevel_init.c => usb_a9263_lowlevel.c} | 43 ++++++++++++++++------
 arch/arm/mach-at91/Kconfig                         |  4 --
 4 files changed, 61 insertions(+), 16 deletions(-)
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c
 rename arch/arm/boards/usb-a926x/{usb_a9263_lowlevel_init.c => usb_a9263_lowlevel.c} (76%)

diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile
index a4eae1844..65cc4082f 100644
--- a/arch/arm/boards/usb-a926x/Makefile
+++ b/arch/arm/boards/usb-a926x/Makefile
@@ -2,6 +2,8 @@ obj-y += init.o
 
 obj-$(CONFIG_AT91_BOOTSTRAP) += usb_a9263_bootstrap.o
 
-lwl-$(CONFIG_AT91SAM926X_LWL) += usb_a9263_lowlevel_init.o
+lwl-$(CONFIG_MACH_USB_A9260) += usb_a9260_lowlevel.o
+lwl-$(CONFIG_MACH_USB_A9G20) += usb_a9260_lowlevel.o
+lwl-$(CONFIG_MACH_USB_A9263) += usb_a9263_lowlevel.o
 
 bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-usb-a926x
diff --git a/arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c b/arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c
new file mode 100644
index 000000000..02896856d
--- /dev/null
+++ b/arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Under GPLv2
+  */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+
+	barebox_arm_entry(AT91_CHIPSELECT_1,
+			  at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)),
+			  NULL);
+}
diff --git a/arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c b/arch/arm/boards/usb-a926x/usb_a9263_lowlevel.c
similarity index 76%
rename from arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c
rename to arch/arm/boards/usb-a926x/usb_a9263_lowlevel.c
index f6dc58e3f..066452b95 100644
--- a/arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c
+++ b/arch/arm/boards/usb-a926x/usb_a9263_lowlevel.c
@@ -4,16 +4,12 @@
  * Under GPLv2
  */
 
-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
-#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>
+#include <linux/sizes.h>
+
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam926x_board_init.h>
+#include <mach/at91sam9263_matrix.h>
 
 #define MASTER_CLOCK		180
 
@@ -24,7 +20,7 @@
 #endif
 #define MASTER_PLL_DIV		6
 
-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+static void __bare_init usb_a9263_board_config(struct at91sam926x_board_cfg *cfg)
 {
 	/* Disable Watchdog */
 	cfg->wdt_mr =
@@ -109,3 +105,28 @@ void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_c
 		AT91_RSTC_RSTTYP_WAKEUP |
 		AT91_RSTC_RSTTYP_WATCHDOG;
 }
+
+static void __bare_init usb_a9263_init(void)
+{
+	struct at91sam926x_board_cfg cfg;
+
+	cfg.pio = IOMEM(AT91SAM9263_BASE_PIOD);
+	cfg.sdramc = IOMEM(AT91SAM9263_BASE_SDRAMC0);
+	cfg.ebi_pio_is_peripha = true;
+	cfg.matrix_csa = AT91_MATRIX_EBI0CSA;
+
+	usb_a9263_board_config(&cfg);
+	at91sam926x_board_init(&cfg);
+
+	barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
+	                  NULL);
+}
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+
+	usb_a9263_init();
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b7d08b1e6..1c9dbd578 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -300,7 +300,6 @@ config MACH_TNY_A9260
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
 	select SUPPORT_CALAO_DAB_MMX
-	select AT91SAM9260_LWL
 	help
 	  Select this if you are using a Calao Systems USB-A9260.
 	  <http://www.calao-systems.com>
@@ -389,7 +388,6 @@ config MACH_TNY_A9G20
 config MACH_USB_A9G20
 	bool "CALAO USB-A9G20"
 	select SUPPORT_CALAO_DAB_MMX
-	select AT91SAM9260_LWL
 	help
 	  Select this if you are using a Calao Systems USB-A9G20.
 	  <http://www.calao-systems.com>
@@ -456,8 +454,6 @@ config MACH_TNY_A9263
 config MACH_USB_A9263
 	bool "CALAO USB-A9263"
 	select HAVE_AT91_BOOTSTRAP
-	select AT91SAM9263_LWL
-	select AT91SAM926X_LWL
 	help
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
-- 
2.12.0