[PATCH] arm: Baltos: setup MPU PLL to run at 600MHz

[Sascha Hauer]

On Tue, Oct 18, 2016 at 02:24:03PM +0200, yegorslists at googlemail.com wrote:
> From: Yegor Yefremov <yegorslists at googlemail.com>
> 
> Signed-off-by: Yegor Yefremov <yegorslists at googlemail.com>
> ---
>  arch/arm/boards/vscom-baltos/lowlevel.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/boards/vscom-baltos/lowlevel.c b/arch/arm/boards/vscom-baltos/lowlevel.c
> index 8bce91a..87f2a74 100644
> --- a/arch/arm/boards/vscom-baltos/lowlevel.c
> +++ b/arch/arm/boards/vscom-baltos/lowlevel.c
> @@ -93,7 +93,7 @@ static noinline int baltos_sram_init(void)
>  	while (__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0);
>  
>  	/* Setup the PLLs and the clocks for the peripherals */
> -	am33xx_pll_init(MPUPLL_M_500, DDRPLL_M_400);
> +	am33xx_pll_init(MPUPLL_M_600, DDRPLL_M_400);
>  	am335x_sdram_init(0x18B, &ddr3_cmd_ctrl, &ddr3_regs, &ddr3_data);
>  	sdram_size = get_ram_size((void *)0x80000000, (1024 << 20));
>  	if (sdram_size == SZ_256M)
> -- 
> 2.1.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |